CONSTRUCTION
For manual seats, the driver seat is equipped with manual slide, manual reclining and manual lifter, while the front passenger seat is equipped with a manual slide and manual reclining mechanism, allowing seat positions to be optimally adjusted.
| *a | Seat Slide | *b | Recline |
| *c | Seat Lifter | *d | The illustration shown is example only. |
|
○ : Equipped -: Not equipped |
|||
| Item | Stroke | Driver Seat | Front Passenger Seat |
| 6-way | 4-way | ||
| Seat Slide | Approximately 260 mm (10.2 in.) | ○ | - |
| Approximately 240 mm (9.4 in.) | - | ○ | |
| Recline | Approximately 52° | ○ | ○ |
| Seat Lifter | Upwards approximately 30 mm (1.2 in.) Downwards approximately 30 mm (1.2 in.) |
○ | - |
A seatback pocket is provided depending on the model.
| *1 | Seatback Pocket | - | - |
| *a | The illustration shown is example only. | - | - |
A tumble guard is provided in the front seatback to hold the rear No. 1 seat when it is tumbled.
| *1 | Tumble Guard | - | - |
| *a | The illustration shown is example only. | - | - |
The front seatback frame is made a panel type and the front seat rail is installed to the body, achieving weight reduction.
| *a | Panel Type Front Seatback Frame | *b | Directly Installed Front Seat Rail |
| *c | The illustration shown is example only. | - | - |