OUTLINE
Depending on the specifications of the vehicle, an 8-way power seat or 6-way manual seat is provided for the driver seat.
Depending on the specifications of the vehicle, an 8-way power seat or 4-way manual seat is provided for the front passenger seat.
| *A | 8-way Power Seat (Front Passenger Seat) | *B | 8-way Power Seat (Driver Seat) |
| *C | 4-way Manual Seat (Front Passenger Seat) | *D | 6-way Manual Seat (Driver Seat) |
| *a | This illustration shown is an example only. | - | - |
40/20/40 or 60/40 split folding tumble seats are provided for the rear No. 1 seat depending on the model.
| *A | 40/20/40 Split Folding Tumble Seat | *B | 60/40 Split Folding Tumble Seat |
Manual or power retractable 50/50 split folding double flat seats are provided for the rear No. 2 seat depending on the model.
Fabric, genuine leather or synthetic leather is provided for the seat cover, depending on the models.
The genuine leather or synthetic leather front seat and rear No. 1 seat feature stitched ornamentation.
MDI (diphenylmethane diisocyanate) is used in the front seats for superior seating surface stability and pressure dispersion, resulting in minimal body inclination and reduced posture collapsing in the low-G range.
The sides of the backside support are higher in the front seats, improving lateral holding performance in the medium-G range.
The distance from the rear No. 1 seat hip-point to the center of the reclining hinge is shortened, reducing the feeling of being pushed forward.
| *a | Hip-point | *b | Center of the Reclining Hinge |
An armrest with a cup holder is provided in the seatback of the center seat of the rear No. 1 seat depending on the model.
| *1 | Cup Holder | *2 | Rear Center Armrest |
| *a | The illustration shown is an example only. | - | - |