Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
NM38G0E _59 Vehicle Exterior _102326 LIGHTING (EXT) _0473633 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  DAYTIME RUNNING LIGHT  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with projector type headlight

*2: Models with reflector type headlight

Headlight ECU Sub-assembly RH*1 Receives daytime running light control signals and illuminates the daytime running lights.
Headlight ECU Sub-assembly LH*1
LED Driver Module RH (Headlight LED ECU RH)*2 Receives daytime running light control signals and illuminates the daytime running lights.
LED Driver Module LH (Headlight LED ECU LH)*2
Main Body ECU (Multiplex Network Body ECU) Receives various signals and transmits the daytime running light control signal.
Steering Sensor Sends the light control switch position signal to the main body ECU.
Turn Signal Switch Light Control Switch Sends the light control switch position signal to the steering sensor.
Automatic Light Control Sensor Detects the ambient light level and transmits a signal to the main body ECU.
Brake Actuator Assembly No. 2 Skid Control ECU Sends the parking brake operation signal to the main body ECU.
ECM Sends the engine speed signal to the main body ECU.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.


SYSTEM CONTROL


a.

Operating Condition

i.

The daytime running lights illuminate when the following conditions are all met.

·

The ignition switch is on (IG).

·

The engine speed signal is input (engine is running).

·

The light control switch is in the AUTO position (and the taillights are not turned on via the automatic light control system).

·

The parking brake is released.





FUNCTION


a.

The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.