FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with projector type headlight *2: Models with reflector type headlight |
||
| Headlight ECU Sub-assembly RH*1 | Supplies power to the clearance lights. | |
| Headlight ECU Sub-assembly LH*1 | ||
| LED Driver Module RH (Headlight LED ECU RH)*2 | Supplies power to the clearance lights. | |
| LED Driver Module LH (Headlight LED ECU LH)*2 | ||
| Main Body ECU (Multiplex Network Body ECU) | Receives various signals and sends clearance lights illumination signals. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Automatic Light Control Sensor | Detects the ambient light level and transmits them to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly RH | Detects whether a door is open or closed and sends the signal to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly LH | ||
| Rear Door Courtesy Light Switch Assembly RH | ||
| Rear Door Courtesy Light Switch Assembly LH | ||
| Front Door Lock with Motor Assembly RH | Door Lock Position Switch | Sends door lock/unlock condition signals to the main body ECU. |
| Front Door Lock with Motor Assembly LH | Door Lock Position Switch | |
| Rear Door Lock with Motor Assembly RH | Door Lock Position Switch | |
| Rear Door Lock with Motor Assembly LH | Door Lock Position Switch | |
| Certification ECU (Smart Key ECU Assembly) |
·
Sends engine switch condition signals to the main body ECU.
·
Sends the wireless door lock/unlock operation signal to the main body ECU. |
|
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
SYSTEM CONTROL
The welcome light illumination system operates as follows:
| Condition | Details |
|---|---|
| System Activation | When all of the following conditions are met, the welcome light illumination system operates.
·
The ignition switch is off.
·
The light control switch is in the AUTO position.
·
The automatic light control sensor outputs the night mode signal. |
| Light Turn-on | The clearance lights on for 15 seconds when the door unlock operation is being used. |
| Light Turn-off | After the light is illuminated, the clearance lights are turned off when either of the following conditions is met before 15 seconds have elapsed.
·
The ignition switch is on (IG).
·
The light control switch is in any position except the AUTO position.
·
Door lock is performed. |
FUNCTION
The welcome light illumination system operates the clearance lights in conjunction with the locking and unlocking of the doors, ensuring nighttime usability.
The welcome light illumination control function can be turned on and off using the customization function. For details, refer to the Repair Manual.