FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Headlight ECU Sub-assembly RH | Controls the headlight leveling motor according to control signals from the headlight ECU sub-assembly LH. | |
| Headlight ECU Sub-assembly LH |
·
Receives various signals and controls the headlight leveling motor.
·
Sends headlight leveling motor operation signals to the headlight ECU sub-assembly RH. |
|
| Rear Height Control Sensor Sub-assembly RH | Detects vehicle height value and transmits a headlight ECU sub-assembly LH. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Main Body ECU (Multiplex Network Body ECU) | Receives a light control signal and transmits it to the headlight ECU sub-assembly LH. | |
| Brake Actuator Assembly | No. 2 Skid Control ECU | Sends the wheel speed signal to the headlight ECU sub-assembly LH. |
| Combination Meter Assembly | Displays a warning message on the multi-information display when a malfunction occurs in the automatic headlight beam level control system. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
SYSTEM CONTROL
Dynamic Control Type
The headlight ECU sub-assembly LH receive changes in the height of the vehicle which is detected by the rear height control sensor sub-assembly RH and calculate the change in pitch of the vehicle.
The headlight ECU sub-assemblies adjust the vertical aim of the headlights based on the calculated angle of the vehicle in order to maintain a constant beam angle.
FUNCTION
The height control sensor sub-assembly detects changes in the vehicle's rear ride height due to cargo loads etc., and operates the headlight leveling motor RH/LH in accordance with the changes, keeping the headlight axes at a constant angle.
Combination Meter Assembly
When a malfunction occurs in the automatic headlight beam level control system, the buzzer sounds, and the "Headlight System Malfunction Visit Your Dealer" warning message is displayed on the multi-information display.
FAIL-SAFE
If the headlight ECU sub-assembly detects a malfunction in the automatic headlight beam level control system, the headlight ECU sub-assembly performs the fail-safe operation. For details, refer to the Repair Manual.