FUNCTION
The illuminated entry system has the following functions:
| Function | Outline | Lights that Operate |
|---|---|---|
| Actuation Area-linked |
·
When the electrical key transmitter enters any actuation area around the doors, the lights that operate turn on.
·
When the electrical key transmitter leaves all of the actuation areas around the doors, the lights that operate turn off. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2
·
Outside Footwell Lights*3
·
Step Lights*4 |
| Door Lock/Unlock-linked |
·
When any door is unlocked, the lights that operate turn on.
·
When all doors are locked, the lights that operate turn off. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2
·
Outside Footwell Lights*3
·
Step Lights*4 |
| Door Open/Close-linked |
·
When any door is opened, the lights that operate turn on.
·
When all doors are closed, the lights that operate turn off. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2
·
Outside Footwell Lights*3
·
Step Lights*4
·
Map Lights*5, *9
·
Courtesy Light Assemblies*6, *9
·
No.1 Luggage Compartment Light Assembly*10 |
| Engine switch-linked | When the ignition switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2 |
| When the ignition switch is turned from off to on (ACC) or on (IG), the lights that operate turn off. | Dome Lights | |
| Shift Position-linked | When the shift position is moved from P to any other position, the lights that operate dim. |
·
Foot Lights*1
·
Inside Handle Illumination Lights*2 |
| Tail Lights-linked | When the tail lights turn on, the lights that operate turn on. | Shift Illumination Lights*7 |
| Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
An actuation area-linked function is operated. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2 |
| When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
The door unlock-linked function is operated.
·
Any door is opened and then all doors are closed when the ignition switch is off. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2
·
Outside Footwell Lights*3
·
Step Lights*4 |
|
| Battery Saving |
·
When 20 minutes elapse after the ignition switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.
·
The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
-
The ignition switch is turned on (ACC) or on (IG).
-
Any door is opened and closed.
-
Any door is unlocked.
-
The electrical key transmitter enters any exterior actuation area. |
·
Dome Lights
·
Foot Lights*1
·
Inside Handle Illumination Lights*2
·
No.1 Luggage Compartment Light Assembly |
| Interior Light Auto Cut | When no changes occur in the condition of the lights switches on for 20 minutes, these lights turn off. |
·
Dome Lights
·
Map Lights*5
·
Courtesy Light Assemblies*6
·
No.1 Luggage Compartment Light Assembly
·
Vanity Lights*8 |
*1: Models with foot light
*2: Models with inside handle illumination light
*3: Models with outside footwell light
*4: Models with step light
*5: Models with map light
*6: Models with courtesy light assembly
*7: Models with shift illumination light
*8: Models with vanity light
*9: Only the lights on the same seat as the door that was opened illuminate.
*10: Operates only when opening/closing the back door.
Collision-linked Interior Light Control
Condition for turning on the interior lights
The airbag ECU detects an impact
Conditions for turning off the interior lights
Approximately 20 minutes elapse after the lights are turned on
A dome light off operation is performed
The interior lights may not turn on depending on the severity of the impact, the type of collision or due to communication malfunctions.
Customization Function
Settings of some functions can be changed as desired by the user. Refer to the Repair Manual for details.