CONSTRUCTION
The remaining fuel amount based on the voltage output signal of the fuel sender gauge assembly is input in the meter ECU, which computes this information to calculate the data used for the remaining fuel amount display.
A fuel sender gauge assembly is provided on each fuel tank assembly to transmit the remaining amount of each fuel tank assembly to the meter ECU, in order to accurately provide the driver with information on the amount remaining in the 2 fuel tanks.
| *1 | Combination Meter Assembly | *2 | Fuel Meter |
| *3 | Low Fuel Warning Lamp | *4 | Meter ECU |
| *5 | ECM | *6 | Fuel Tank Assembly |
| *7 | Fuel Sub Tank Assembly | - | - |
| *a | Fuel Meter Drive Signal | *b | Fuel Volume Information Signal |
| *c | Fuel Injection Information Signal | - | - |
|
CAN Communication Line | - | - |