OUTLINE
A conventional reduction type starter is used.
A starter control (cranking hold function) is used. Once the ignition switch is pushed, this control continues to operate the starter until the engine has started.
SPECIFICATION
| Rating Output | 1.4 kW |
| Rating Voltage | 12 V |
| Length*1 | 153.1 mm (6.03 in.) |
| Weight | 3750 g (8.3 lb) |
| Rotating Direction*2 | Clockwise |
*1: Length from the mounted area to the rear end of the starter.
*2: Viewed from pinion side.