Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM
NM38G0E _52 Drivetrain _102373 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0473727 AUTOMATIC TRANSMISSION SYSTEM CO CONTROL F

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  CONTROL  AUTOMATIC TRANSMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Torque Converter Assembly
·

Transmits the engine power to the transmission.

·

Increases engine torque.


Oil Pump Provides oil pressure necessary for transmission operation.
No. 1 Clutch (C1) Connects the input shaft and the intermediate shaft.
No. 2 Clutch (C2) Connects the input shaft and the center planetary gear assembly.
No. 1 Brake (B1) Locks the rotations of the front planetary carrier and the center planetary ring gear.
No. 2 Brake (B2) Locks the rotation of the rear planetary ring gear.
No. 4 Brake (B4) Locks the rotation of the front planetary ring gear.
1-way Clutch (F) Locks the counterclockwise rotations of the center planetary carrier and the rear planetary ring gear.
Planetary Gears Change the power transmission route in accordance with clutch and brake operation, and increase or decrease output shaft revolution accordingly.
Solenoid Valve (SL1) Performs shift controls.
Solenoid Valve (SL2) Performs shift controls.
Solenoid Valve (SL3) Performs shift controls.
Solenoid Valve (SL4) Performs shift controls.
Solenoid Valve (SLT) Controls line pressure.
Solenoid Valve (SLU)
·

Performs lock-up clutch controls.

·

Performs B2 brake hydraulic pressure controls (only for the 1st range when the S mode is selected).


Solenoid Valve (SL) Shifts between lock-up hydraulic pressure and B2 brake hydraulic pressure.
No. 1 ATF Temperature Sensor Detects the ATF temperature.
No. 2 ATF Temperature Sensor Detects the ATF temperature.
Transmission Revolution Sensor (NT) Detects the input speed of the transmission.
Transmission Revolution Sensor (SP2) Detects the output speed of the transmission.
Park/Neutral Position Switch Assembly Detects the shift lever position (P, R, N, D).
Shift Lock Control Unit Assembly Transmission Control Switch
·

Detects that the shift lever is in S.

·

Detects the driver's upshift and downshift operations when the shift lever is in S.


Integration Control and Panel Sub-assembly Power Mode Switch Selects the drive mode (Power mode).
Second Start Switch Sends a second start mode signal to the ECM.
Combination Meter Assembly Multi-information Display
·

Displays the shift lever position.

·

Displays the shift range.

·

Displays the Power mode.

·

Displays the second start mode.

·

Displays a message when the ATF is at a high temperature.


MIL Illuminates or blinks to inform the driver when the ECM detects a malfunction.
Buzzer
·

Sounds when shift-down operation is rejected in S mode.

·

Warns the driver by sounding when a message is shown on the multi-information display.


ECM
·

Controls each solenoid valve and engine output in response to signals from each sensor and switch.

·

When the ECM detects a malfunction, it makes a diagnosis and memorizes the failed section.


4WD Control ECU Sends a drive mode signal to the ECM.
Air Conditioning Amplifier Assembly Sends a shift-up tardiness control signal to the ECM.


SYSTEM CONTROL


Electronic Control of Automatic Transmission
Control Outline
Powertrain Cooperative Control Controls both the shift control and engine output control in an integrated way, thus achieving excellent shift characteristics and driveability.
Shift Timing Control The ECM sends current to solenoid valves (SL1), (SL2), (SL3), (SL4) and/or (SL) based on signals from various sensors in order to shift the gears.
Line Pressure Control Actuates the solenoid valve (SLT) to control the line pressure in accordance with information from the ECM and the operating conditions of the transmission.
Clutch Pressure Optimal Control The solenoid valves (SL1), (SL2), (SL3), (SL4), (SLT) and (SLU) minutely control the clutch pressure in accordance with the engine output and driving conditions of the transmission.
Clutch to Clutch Pressure Control By utilizing pressure output from solenoid valves (SL1), (SL2), (SL3) and (SL4) based on drive signals sent from the ECM, each of the clutch and brake hydraulic pressures can be controlled directly and independently.
Vehicle Lift Control The clutch release speed has been optimized to restrain the upward movement of the vehicle when the shift lever is moved from D to N.
Shift Down Control The hydraulic passages and control have been optimized in order to ensure a smooth shift feel during downshifting to accelerate the vehicle.
Engine Torque Control Retards the engine ignition timing temporarily to improve shift feeling while upshifts or downshifts occur.
Lock-up Timing Control The ECM sends current to the solenoid valve (SLU) based on signals from various sensors and engages or disengages the lock-up clutch.
Flex Lock-up Clutch Control Controls the solenoid valve (SLU), provides an intermediate mode for when the lock-up clutch is between on and off, and increases the operating range of the lock-up clutch to improve fuel economy.
Coast Downshift Control The ECM performs downshifts before fuel cut ends to prevent the engine speed from decreasing and maintain the fuel cut.
Artificial Intelligence Shift Control (AI-shift Control) Based on the signals from various sensors, the ECM determines the road conditions and the intention of the driver. Thus, an appropriate shift pattern is automatically determined, which improves driveability.
Multi-mode Automatic Transmission The ECM appropriately controls the automatic transmission in accordance with the shift range position selected while the shift lever is in S.
ATF High Temperature Control When the ATF is at a high temperature, normal shifting characteristics will be changed to shifting characteristics which actively utilize the low gear range to prevent the oil temperature from rising further.

a.

Powertrain Cooperative Control

i.

The Driving Response and Acceleration Management System (DRAMS) is used for this model. This system integrally controls the engine, transmission and other driving related controls in order to improve vehicle maneuverability and driving comfort, as well as provide optimal drive feeling as a whole, including the behavior of the vehicle, while taking into account the drivers' needs and environment.


ii.

By integrally controlling the engine and automatic transmission using this system, acceleration maneuvers are replaced with drive force demanded by the driver. As a result, quick response and a high quality driving experience in accordance with the driver's intentions is achieved, such as when accelerating or decelerating, starting or stopping, or during gear shifts to provide demanded drive force while still producing a smoother shift transition.

X127069E07
1.104,1.313 2.021,1.51 0.917,0.198 10 false Engine 2.906,1.698 3.76,2.198 0.854,0.5 10 false Automatic Transmission 5.25,0.76 5.625,1.302 0.375,0.542 10 false Drive Force 6.344,1.542 6.719,2.083 0.375,0.542 10 false Time 5.396,2.354 6.823,2.625 1.427,0.271 10 false Generated Drive Force 3.24,3.167 4.667,3.438 1.427,0.271 10 false Engine Control 4.802,3.188 6.229,3.458 1.427,0.271 10 false Transmission Control 1.365,3.823 1.74,4.365 0.375,0.542 10 false Drive Force 2.198,4.458 2.573,5 0.375,0.542 10 false Time 1.115,4.896 2.354,5.375 1.24,0.479 10 false Converted into Drive Force Value 2.927,3.979 4.521,4.49 1.594,0.51 10 false Determination of Necessary Engine Torque 4.885,3.969 5.948,4.521 1.063,0.552 10 false Determination of Appropriate Gear 3.281,5.156 5.896,5.427 2.615,0.271 10 false Determination of Necessary Drive Force 4.49,5.583 6.073,5.948 1.583,0.365 10 false Powertrain Management 0.24,6.104 1.344,6.698 1.104,0.594 10 false Accelerator Pedal Operation 3.438,5.906 5.021,6.271 1.583,0.365 10 false ECM 4.885,6.146 6.354,6.49 1.469,0.344 10 true No. 2 Skid Control ECU 4.948,6.5 6.531,6.865 1.583,0.365 10 false Brake Control System 0.625,6.917 2.208,7.281 1.583,0.365 10 false : Drive force 0.625,7.344 2.417,7.667 1.792,0.323 10 false : Drive force control signal 2.875,7.344 4.833,7.646 1.958,0.302 10 false : Cooperative control signal


iii.

Start Control

·

With DRAMS, engine torque will optimally be controlled in a real-time manner in accordance with speed ratios between engine speed and turbine speed so that finely controlled starting capability has been provided while balancing the "reduction of a feel of jump and suppression of tire slipping" and "smooth responsiveness" when starting.




b.

Line Pressure Control

i.

In order to obtain predetermined line pressure characteristics in accordance with each sensor signal, the ECM activates the solenoid valve (SLT) to regulate the throttle pressure.


ii.

This makes it possible for the primary regulator valve to precisely and minutely control the line pressure in accordance with the engine output, thus providing smoother shift characteristics.

X127070E26
0.594,0.594 2.583,0.792 1.99,0.198 10 false Line Pressure 0.802,2.313 1.198,2.781 0.396,0.469 10 false Oil Pump 1.448,1.5 2.073,2.135 0.625,0.635 10 false Primary Regulator Valve 3.302,2.042 4.229,2.563 0.927,0.521 10 false Solenoid Valve (SLT) 4.698,2.635 5.625,3.156 0.927,0.521 10 false ECM 5.625,0.5 6.927,0.833 1.302,0.333 10 false Input Speed Signal 5.625,0.917 6.927,1.25 1.302,0.333 10 false ATF Temperature 5.625,1.302 6.927,1.635 1.302,0.333 10 false Shift Position 5.625,1.708 6.927,2.042 1.302,0.333 10 false Gear Position 5.625,2.104 6.74,2.573 1.115,0.469 10 false Accelerator Pedal Opening Angle 5.625,2.896 6.594,3.385 0.969,0.49 10 false Engine Coolant Temperature 5.635,3.688 6.677,4.01 1.042,0.323 10 false Engine Speed 5.604,4.104 6.719,4.521 1.115,0.417 10 false Throttle Position 5.635,4.875 6.823,5.292 1.188,0.417 10 false Intake Air Volume 3.469,4.844 4.396,5.365 0.927,0.521 10 false Current 2.063,3.708 2.625,4.302 0.563,0.594 10 false Fluid Pressure



c.

Clutch Pressure Optimal Control

i.

The ECM monitors the signals from various types of sensors, such as the transmission revolution sensor (NT), allowing solenoid valves (SL1), (SL2), (SL3), (SL4), (SLT) and (SLU) to minutely control the clutch pressure in accordance with engine output and driving conditions. As a result, smooth shift characteristics are achieved.

X127071E01
3.104,3.083 2.667,2.365 2.667,2.365 2.479,2.365 true 4.063,3.104 4.365,2.313 4.365,2.313 4.615,2.313 true 3.542,3.917 3.073,4.781 3.073,4.781 2.885,4.781 true 3.75,3.865 3.219,5.427 3.219,5.427 3.031,5.427 true 3.896,3.865 3.479,5.875 3.479,5.875 3.292,5.875 true 0.26,0.385 0.615,1.646 0.354,1.26 10 false Input Shaft rpm 1.438,0.25 2.323,1.094 0.885,0.844 10 false Target rpm Change Ratio 0.74,1.302 2.51,1.667 1.771,0.365 10 false Practical rpm Change Ratio 1.688,1.698 2.198,2.021 0.51,0.323 10 false Time 5.573,1.229 6.021,1.656 0.448,0.427 10 false ECM 0.198,2.26 2.594,2.656 2.396,0.396 10 false Transmission Revolution Sensor (NT) 4.656,2.219 7.094,2.594 2.438,0.375 10 false Transmission Revolution Sensor (SP2) 5.146,2.865 5.594,4.167 0.448,1.302 10 false Output Shaft Torque 6.604,3.823 7,4.219 0.396,0.396 10 false Time 0.938,4.667 2.885,5.302 1.948,0.635 10 false Solenoid Valve (SL1, SL2, SL3, SL4, SLT, SLU) 1.396,5.313 3.125,5.719 1.729,0.406 10 false No. 1 Temperature Sensor 1.656,5.771 3.385,6.229 1.729,0.458 10 false No. 2 Temperature Sensor 4.802,4.698 5.604,5.583 0.802,0.885 10 false Clutch/Brake Pressure 5.625,5.677 7.01,6.073 1.385,0.396 10 false Solenoid Drive Signal



d.

Clutch to Clutch Pressure Control

i.

By using a clutch to clutch pressure control without using 1-way clutches in the 2nd or higher gears, a light, compact 6-speed automatic transmission has been provided.


ii.

By utilizing pressure output from solenoid valves (SL1), (SL2), (SL3) and (SL4) based on drive signals sent from the ECM, each of the clutch and brake hydraulic pressures can be controlled directly and independently.

X150069E04
0.458,0.885 1.698,1.302 1.24,0.417 10 false Clutch Control Valve 0.458,2.219 1.698,2.635 1.24,0.417 10 false Clutch Control Valve 0.448,3.542 1.708,3.938 1.26,0.396 10 false Brake Control Valve 0.458,4.865 1.698,5.271 1.24,0.406 10 false Brake Control Valve 0.115,5.323 1.167,5.542 1.052,0.219 10 false Line Pressure 2.927,0.573 3.667,1.094 0.74,0.521 10 false Solenoid Valve (SL1) 2.927,1.896 3.667,2.417 0.74,0.521 10 false Solenoid Valve (SL2) 2.927,3.229 3.667,3.75 0.74,0.521 10 false Solenoid Valve (SL3) 2.927,4.542 3.656,5.052 0.729,0.51 10 false Solenoid Valve (SL4) 3.823,2.49 4.563,3.01 0.74,0.521 10 false ECM 4.656,0.438 7.104,0.708 2.448,0.271 10 false Transmission Revolution Sensor (NT) 4.656,1 7.104,1.271 2.448,0.271 10 false Transmission Revolution Sensor (SP2) 4.656,1.573 7.104,1.844 2.448,0.271 10 false No. 1 ATF Temperature Sensor 4.656,2.125 7.104,2.396 2.448,0.271 10 false No. 2 ATF Temperature Sensor 4.646,2.698 6.354,3.354 1.708,0.656 10 false Intake Mass Air Flow Meter Sub-assembly 4.656,3.448 6.969,3.76 2.313,0.313 10 false Engine Coolant Temperature Sensor 4.656,4.021 6.969,4.333 2.313,0.313 10 false Accelerator Pedal Position Sensor 4.656,4.594 6.969,4.906 2.313,0.313 10 false Throttle Position Sensor



e.

Lock-up Timing Control

i.

The ECM operates the lock-up timing control in order to improve fuel economy.

Lock-up Timing Control Operation
Gear Position Shift Lever Position or Shift Range
D, S6 S5 S4
1st X X X
2nd X X X
3rd X X X
4th ○ ○ ○
5th ○ ○ -
6th ○ - -

HINT:

○: Available

X: Does not operate

-: Not applicable




f.

Flex Lock-up Clutch Control

i.

During acceleration, partial control of the power transmission between the lock-up clutch and torque converter greatly boosts transmission efficiency in accordance with the driving conditions, improving fuel economy.


ii.

Even when the vehicle is decelerating (the accelerator pedal is released), flex lock-up clutch control operates. As a result, the fuel cut area is expanded and fuel economy is improved.


iii.

By allowing flex lock-up clutch control to continue operating during gearshifts, smooth torque transmission is obtained. As a result, fuel economy and driveability are improved.


iv.

For flex lock-up clutch control, H infinity (H∞) control theory is used to achieve a high level of system stability and response to various characteristic changes.

X149989E02
3.802,4.396 3.448,2.583 3.448,2.583 2.844,2.583 true 2.573,3.823 2.302,3.063 2.302,3.063 2.094,3.063 true 1.854,4.208 1.323,3.5 1.323,3.5 1.115,3.5 true 1.885,4.688 1.594,5.177 1.594,5.177 1.385,5.177 true 3.917,5.24 3.646,5.583 3.646,5.583 3.438,5.583 true 4.25,5.229 4.052,6.063 4.052,6.063 3.802,6.063 true 4.448,5.188 4.771,6.406 4.771,6.406 4.99,6.406 true 4.552,5.188 4.875,6.021 4.875,6.021 5.094,6.021 true 6.125,1.344 6.229,0.948 6.229,0.948 6.021,0.948 false 6.281,1.667 6.135,1.667 6.135,1.667 5.969,1.531 false 3.406,0.25 3.865,0.448 0.458,0.198 10 false ECM 0.552,2.5 2.958,2.802 2.406,0.302 10 false Transmission Revolution Sensor (NT) 0.604,2.969 2.406,3.26 1.802,0.292 10 false Throttle Position Sensor 0.25,3.417 1.115,4.104 0.865,0.688 10 false E.F.I. Engine Coolant Temperature Sensor 0.448,5.083 1.375,5.74 0.927,0.656 10 false Crank Position Sensor 2.073,5.49 3.51,5.813 1.438,0.323 10 false Lock-up Control Valve 3.063,5.813 3.917,6.74 0.854,0.927 10 false Solenoid Valve (SLU) 5.031,6.313 7.01,6.573 1.979,0.26 10 false No. 1 ATF Temperature Sensor 5.146,5.927 7.094,6.208 1.948,0.281 10 false No. 2 ATF Temperature Sensor 4.708,0.865 6.083,1.25 1.375,0.385 10 false Engine Speed Signal 4.729,1.229 5.177,1.76 0.448,0.531 10 false Engine Speed 5.292,1.906 6.208,2.219 0.917,0.313 10 false Vehicle Speed 6.323,1.573 6.75,2.24 0.427,0.667 10 false Input Speed Signal 6.219,2.896 6.771,3.771 0.552,0.875 10 false Linear Solenoid Signal 4.698,3.042 5.292,3.531 0.594,0.49 10 false Current 5.552,3.521 6.469,3.833 0.917,0.313 10 false Time

Flex Lock-up Operating Range
X102147E21
2.583,1.083 5.604,1.427 3.021,0.344 10 false : Lock-up operating range 2.583,1.438 5.604,1.781 3.021,0.344 10 false : Flex lock-up operating range (acceleration) 2.583,1.802 5.604,2.146 3.021,0.344 10 false : Flex lock-up operating range (deceleration) 3.24,4.219 4.167,4.563 0.927,0.344 10 false Vehicle Speed 1.635,2.135 2.031,2.479 0.396,0.344 10 false Large 4.74,4.208 5.063,4.552 0.323,0.344 10 false High 0.865,2.979 1.979,3.677 1.115,0.698 10 false Accelerator Pedal Depression Angle 0.646,4.031 1.75,4.719 1.104,0.688 10 false Accelerator Pedal is Released

Flex Lock-up Clutch Control Operation (Acceleration)
Gear Shift Lever Position or Shift Range
D, S6 S5 S4
1st X X X
2nd X X X
3rd X X X
4th ○ ○ ○
5th ○ ○ -
6th ○ - -

HINT:

○: Operates

X: Does not operate

-: Not applicable


Flex Lock-up Clutch Control Operation (Deceleration)
Gear Shift Lever Position or Shift Range
D, S6 S5 S4
1st X X X
2nd X X X
3rd X X X
4th ○ ○ X
5th ○ ○ -
6th ○ - -

HINT:

○: Operates

X: Does not operate

-: Not applicable




g.

Coast Downshift Control

i.

Downshift control is used when decelerating, allowing for low fuel consumption by extending fuel cut control as much as possible.


ii.

By performing flex lock-up control and downshift control at the same time when decelerating, a decrease of engine speed has been suppressed, while extending fuel cut control as much as possible without lowering the engine speed below the fuel cut recovery speed.


iii.

By expanding operating gears and widening operating areas through close-gear ratios, fuel efficiency has significantly been enhanced and drivability has been improved by optimizing deceleration force when controls are activated.

X127076E01
1.958,1.49 2.073,1.49 2.073,1.49 2.208,1.771 false 2.906,1.542 3.021,1.542 3.021,1.542 3.156,1.823 false 4.156,1.667 4.031,1.667 4.031,1.667 3.906,1.958 false 4.719,2.698 4.594,2.698 4.594,2.698 4.469,2.448 false 3.979,2.688 4.094,2.688 4.094,2.688 4.167,2.396 false 3.469,2.563 3.583,2.563 3.583,2.563 3.792,2.354 false 0.417,0.615 2.25,0.813 1.833,0.198 10 false Engine Speed 0.323,2.135 1.313,2.677 0.99,0.542 10 false Fuel Cut Return Speed 0.323,2.948 0.885,3.521 0.563,0.573 10 false Fuel Cut Duration 2.24,0.729 3.729,1.281 1.49,0.552 10 false Coast Downshifts Occur Earlier 1.552,1.396 2.542,1.938 0.99,0.542 10 false To 6th 2.5,1.448 3.49,1.99 0.99,0.542 10 false To 5th 4.198,1.583 5.188,2.125 0.99,0.542 10 false To 4th 4.75,2.615 5.74,3.156 0.99,0.542 10 false To 4th 3.573,2.594 4.563,3.135 0.99,0.542 10 false To 5th 3.063,2.479 4.052,3.021 0.99,0.542 10 false To 6th 4.969,3 5.958,3.542 0.99,0.542 10 false Time 3.177,3.469 4.667,4.021 1.49,0.552 10 false Extended Time 4.979,3.417 6.552,4.292 1.573,0.875 10 false Enhanced Fuel Efficiency Through Extended Fuel Cut Control 4.833,0.177 6.74,0.552 1.906,0.375 10 false : With coast downshift control 4.844,0.583 6.958,0.958 2.115,0.375 10 false : Without coast downshift control



h.

Artificial Intelligence-shift Control (AI-shift Control)

i.

AI-shift control selects optimal controls in accordance with "driving environment" and the "driver's intention" based on the degree of accelerator opening, vehicle speed, brake signals, etc.


ii.

Smooth driving and low fuel consumption have been achieved while driving normally. A strong and linear feeling of acceleration has been provided when accelerating. A direct feeling of deceleration through engine braking and high fuel efficiency have been achieved when decelerating.

X127077E01
2.26,0.094 4.969,0.813 2.708,0.719 10 false Selects Optimal Controls in accordance with "Driving Environment" and "Driver's Intention" 2.802,0.896 4.688,1.302 1.885,0.406 10 false Control when Accelerating 2.896,2.115 4.781,2.521 1.885,0.406 10 false Automatic Shift Control 2.917,3.323 4.802,3.729 1.885,0.406 10 false Uphill/Downhill Control 2.375,1.406 4.854,1.719 2.479,0.313 10 true Direct and Linear Feeling of Acceleration 2.396,2.552 4.917,2.875 2.521,0.323 10 true Smooth Drive and Low Fuel Consumption 2.469,4.219 5.208,4.583 2.74,0.365 10 false - Securing Engine Braking Going Downhill 2.469,3.875 4.99,4.167 2.521,0.292 10 false - Maintaining Drive Force Going Uphill


iii.

Under road condition support control, the ECM identifies the throttle valve opening angle, accelerator pedal opening angle and vehicle speed to determine whether the vehicle is being driven uphill or downhill. Unnecessary upshifting is restrained to automatically achieve optimal drive force at all times while driving uphill. Downshifting is automatically conducted to achieve optimal engine brake force while driving downhill.

X127078E01
0.635,2.823 1.094,3.021 0.458,0.198 10 false 6th 0.635,3.323 1.094,3.521 0.458,0.198 10 false 6th 1.26,2.823 1.719,3.021 0.458,0.198 10 false 4th 1.677,2.823 2.135,3.021 0.458,0.198 10 false 5th 2,2.823 2.458,3.021 0.458,0.198 10 false 3rd 2.344,2.823 2.802,3.021 0.458,0.198 10 false 5th 2.74,2.823 3.198,3.021 0.458,0.198 10 false 4th 3.313,2.823 4.927,3.042 1.615,0.219 10 false 5th (Brake Operating) 5.271,2.823 5.677,3.042 0.406,0.219 10 false 6th 5.823,2.708 6.844,3 1.021,0.292 10 false without Control 5.833,3.198 6.854,3.49 1.021,0.292 10 false with Control 1.448,3.323 1.906,3.521 0.458,0.198 10 false 4th 2.01,3.323 2.469,3.521 0.458,0.198 10 false 3rd 3.031,3.323 3.594,3.552 0.563,0.229 10 false 4th 4.198,3.323 4.729,3.656 0.531,0.333 10 false 3rd 4.677,3.323 5.208,3.656 0.531,0.333 10 false 4th 5.135,3.323 5.667,3.656 0.531,0.333 10 false 5th 5.448,3.323 5.979,3.656 0.531,0.333 10 false 6th


iv.

when the accelerator pedal is quickly released, the shift range is held to improve engine brake force and responsiveness when accelerating again. Also, when the accelerator pedal is quickly depressed, a rapid downshift is performed to improve acceleration responsiveness.

Accelerator Pedal Quickly Released
X127079E01
0.167,1.688 1.281,2.26 1.115,0.573 10 false Accelerator Pedal Operation 0.167,2.792 1.281,3.365 1.115,0.573 10 false Shift Range 0.167,4 1.281,4.573 1.115,0.573 10 false Engine Speed 1.458,1.667 2.573,2.24 1.115,0.573 10 false On 1.458,2.01 2.573,2.583 1.115,0.573 10 false Off 1.458,2.479 2.573,3.052 1.115,0.573 10 false 6th 1.458,2.792 2.573,3.365 1.115,0.573 10 false 5th 1.458,3.104 2.573,3.677 1.115,0.573 10 false 4th 2.927,2.583 3.969,2.833 1.042,0.25 10 false without Control 4.167,3.219 5.208,3.469 1.042,0.25 10 false with Control 3.073,3.708 4.115,3.958 1.042,0.25 10 false with Control 4.188,4.344 5.229,4.594 1.042,0.25 10 false without Control

Accelerator Pedal Quickly Depressed
X127080E01
0.167,1.031 2.156,1.229 1.99,0.198 10 false Vehicle Speed 0.167,2.479 1.292,2.99 1.125,0.51 10 false Accelerator Pedal Operation Angle 0.167,3.667 1.25,4.073 1.083,0.406 10 false Shift Range 1.438,0.323 1.865,0.635 0.427,0.313 10 false High 1.448,1.75 1.875,2.063 0.427,0.313 10 false Low 1.458,2.313 1.885,2.625 0.427,0.313 10 false High 1.469,2.792 1.896,3.104 0.427,0.313 10 false Low 1.521,3.427 1.948,3.74 0.427,0.313 10 false 6th 1.531,3.906 1.958,4.219 0.427,0.313 10 false 5th 3.052,3.563 3.885,3.927 0.833,0.365 10 false with Control 4.677,3.542 5.833,3.865 1.156,0.323 10 false without Control 5.667,1.135 6.635,1.427 0.969,0.292 10 false without Control 6.156,0.438 6.99,0.802 0.833,0.365 10 false with Control


v.

Higher gear settings have been added for high speed gears (5th and 6th gears). In order to balance the reduction of additional drive force and the improvement of fuel efficiency when driving at high speeds, a high speed gear effective utilization control is used.


vi.

By calculating the maximum additional drive force to be generated at high speed gears in a real-time manner, as well as determining the availability of high speed gears according to driving conditions (running resistance, driver's acceleration maneuvers), "balanced, improved fuel efficiency and driving capability" have been achieved.

Conditions Determining that Running in 6th Gear is Impossible (Examples)
X127573E04
1.021,1.833 2.542,2.219 1.521,0.385 10 false Heavy Load: 5th Gear 4.396,1.938 6.604,2.333 2.208,0.396 10 false Accelerating on Slope: 5th Gear

Conditions Determining that Running in 6th Gear is Possible
X127574E04
1.094,1.813 2.708,2.219 1.615,0.406 10 false Light Load: 6th Gear 4.26,1.969 6.646,2.385 2.385,0.417 10 false Constant Driving on Slope: 6th Gear



i.

Multi-mode Automatic Transmission

i.

The driver can select the desired gear step by moving the shift lever "+" (forward) or to "-" (backward) while the shift lever is in S (6-speed sequential shiftmatic mode). Thus, the driver is able to change gear steps with a manual-like feel.


ii.

6-speed sequential shiftmatic mode can be selected from normal driving mode by moving the shift lever to S. The driver can change the gear step by selecting it using the shift lever.


iii.

The driver selects S mode by moving the shift lever to S. At this time, the S4 or S5 range is selected in accordance with the vehicle speed.


iv.

The ECM will restrict the changing of the shift range if it detects a malfunction in the automatic transmission system.


v.

If the vehicle speed and engine speed exceed or go below a preset level in response to the driver's downshift operation request, changing the shift range will be prohibited. In this case, the buzzer in the combination meter will sound to alert the driver.

X149990E01
4.844,0.24 6.771,0.563 1.927,0.323 10 false Combination Meter Assembly 4.854,1.427 6.781,1.75 1.927,0.323 10 false Transmission Control Switch 1.396,1.417 3.083,1.615 1.688,0.198 10 false ECM 2.917,1.167 4.844,1.49 1.927,0.323 10 false Shift-up Signal 2.917,1.563 4.844,1.885 1.927,0.323 10 false Shift-down Signal 2.917,1.958 4.844,2.281 1.927,0.323 10 false S Mode Position Signal 0.625,2.135 2.156,2.99 1.531,0.854 10 false Ignition Advance Control Signal 2.542,2.552 3.917,3.271 1.375,0.719 10 false Fluid Pressure Control and Solenoid Valve Control Signal 0.667,3.635 1.448,3.969 0.781,0.333 10 false Engine 1.948,3.854 2.781,4.24 0.833,0.385 10 false Transmission 5.135,4.219 6.854,4.542 1.719,0.323 10 false : CAN communication line


vi.

The shift lever position and the shift range are indicated by the multi-information display in the combination meter assembly.

X149993C01
1.24,0.219 1.542,0.542 0.302,0.323 10 false *a 1.24,1.021 1.542,1.344 0.302,0.323 10 false *b
*a When Shift Lever is in P, R, N or D *b When Shift Lever is in S



vii.

Blipping downshift control is used to improve shift change response and shift feeling in 6-speed sequential shiftmatic mode.


viii.

The blipping downshift control regulates each clutch and brake using the clutch to clutch pressure control, allowing them to be engaged smoothly and disengaged quickly. In addition, engine speed is boosted by the powertrain cooperative control, thus ensuring engine brake force. In this way, a smooth and quick downshift is achieved. In addition, quicker downshifting has been made available by directly controlling clutch pressure.

HINT:

If ATF and engine coolant temperatures are low, the shift change response will be the same as when blipping downshift control is not available.


X127086E01
0.813,1.635 2.646,1.833 1.833,0.198 10 false Engine Speed 0.823,2.458 2.656,2.656 1.833,0.198 10 false Blipping Downshift Control 0.542,2.813 2.729,3.125 2.188,0.313 10 false Conventional Downshift Control 2.625,0.771 4.458,0.969 1.833,0.198 10 false Downshift Operation 4.948,0.104 6.781,0.302 1.833,0.198 10 false : Blipping downshift control 4.948,0.49 7.021,0.771 2.073,0.281 10 false : Conventional downshift control 5.448,2.49 7.135,2.771 1.688,0.281 10 false : Gear shift initiation time 5.448,2.938 7.135,3.219 1.688,0.281 10 false : Gear shift time 4.323,2.323 6.156,2.521 1.833,0.198 10 false Time 4.375,1.823 6.208,2.021 1.833,0.198 10 false 3rd 4.406,1.25 6.24,1.448 1.833,0.198 10 false 2nd




FUNCTION


a.

Power Mode

i.

The ECM improves acceleration performance and responsiveness by controlling the engine output and by changing the shift point of the transmission, thus achieving a sporty drive.



b.

Second Start Mode

i.

Second start mode can be selected to make smooth starting off possible on surfaces with low friction coefficients, such as snow-covered roads.


ii.

When the 2nd start mode is selected while the shift lever is in D or in the S6, S5, S4, S3 or S2 range, the vehicle can start in the 2nd gear. After a start, if the shift lever is in D or in the S6, S5, S4 or S3 range, transmission will shift up automatically into 3rd, 4th, 5th or overdrive gears in the normal manner. If the shift lever is in the S2 range, the transmission will continue to operate in the 2nd gear.




FAIL-SAFE


a.

The fail-safe function minimizes the loss of operability when an abnormality occurs in a sensor or a solenoid valve.


b.

For details, refer to the Repair Manual.



DIAGNOSIS


a.

When the ECM detects a malfunction, it makes a diagnosis and memorizes the failed section. Furthermore, the ECM illuminates or blinks the MIL in the combination meter assembly to inform the driver.


b.

The ECM will also store the Diagnostic Trouble Codes (DTCs) of the malfunctions. The DTCs can be read by connecting a Global TechStream (GTS) to the DLC3.


c.

For details, refer to the Repair Manual.