CONSTRUCTION
A transfer low planetary gear assembly is used on the planetary gear unit to switch the transfer gear ratio between high and low.
The transfer low planetary gear assembly consists of the planetary sun gear, 6 transfer low planetary pinion gears, transfer low planetary ring gear, and planetary carrier.
The planetary sun gear is integrated with the transfer input shaft. A transfer clutch hub spline piece is fitted to the rear of the planetary sun gear.
6 transfer low planetary pinion gears are fitted to the planetary carrier. Each pinion gear shaft is fixed to the planetary carrier.
The planetary ring gear is fixed to the front transfer case and its internal teeth mesh with the transfer low planetary pinion gears.
In this planetary gear unit, the power transmission route is switched in accordance with the movement of the transfer high and low clutch sleeve. The input power from the transfer input shaft is transmitted to the center differential case via the transfer high and low clutch sleeve.
| *1 | Planetary Carrier | *2 | Transfer Low Planetary Ring Gear |
| *3 | Transfer Low Planetary Pinion Pin | *4 | Transfer Input Shaft |
| *5 | Planetary Sun Gear | *6 | Transfer Clutch Hub Spline Piece |
| *7 | Transfer High and Low Clutch Sleeve | *8 | Transfer Low Planetary Pinion Gear |
OPERATION
High Position
In the high position, the internal gear teeth of the transfer high and low clutch sleeve mesh with the transfer clutch hub spline piece.
Also, the transfer high and low clutch sleeve is connected to the center differential case.
The rotation of the transfer input shaft is transmitted to the planetary sun gear, transfer clutch hub spline piece, transfer high and low clutch sleeve, and the center differential case.
| *1 | Transfer Low Planetary Ring Gear | *2 | Transfer Low Planetary Pinion Gear |
| *3 | Planetary Sun Gear | *4 | Transfer Input Shaft |
| *5 | Transfer Clutch Hub Spline Piece | *6 | Center Differential Case |
| *7 | Transfer High and Low Clutch Sleeve | *8 | Planetary Carrier |
Low Position
In the low position, the external teeth of the transfer high and low clutch sleeve mesh with the planetary carrier.
Also, the transfer high and low clutch sleeve is connected to the center differential case.
The rotation of the transfer input shaft is transmitted in a reduced form to the planetary sun gear, transfer low planetary pinion gears, transfer low planetary pinion pins, planetary carrier, transfer high and low clutch sleeve and center differential case.
| *1 | Transfer Low Planetary Ring Gear | *2 | Transfer Low Planetary Pinion Gear |
| *3 | Planetary Sun Gear | *4 | Transfer Input Shaft |
| *5 | Transfer Clutch Hub Spline Piece | *6 | Center Differential Case |
| *7 | Transfer High and Low Clutch Sleeve | *8 | Planetary Carrier |