Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
NM38G0E _59 Vehicle Exterior _101089 WIPER / WASHER _0473774 WIPER AND WASHER SYSTEM CO CONTROL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  CONTROL  WIPER CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with rain sensing function

*2: Models without rain sensing function

*3: Models with nozzle heater

Windshield Wiper Motor Assembly Operates the wipers according to control performed by the windshield wiper relay assembly.
Rear Wiper Motor Assembly Activates the rear wipers in accordance with the position signal of the windshield wiper switch assembly via the main body ECU (multiplex network body ECU).
Windshield Wiper Relay Assembly Receives windshield wiper switch signal from the steering sensor and operates the windshield wiper motor assembly.
Windshield Washer Motor and Pump Assembly Activates in accordance with the signal from the windshield wiper relay assembly.
Level Warning Switch Assembly Outputs signals to the combination meter when the remaining amount of washer fluid is equal to or less than the specified value.
Main Body ECU (Multiplex Network Body ECU) Receives information from rain sensor sends front wiper operation request signals to the windshield wiper relay assembly.
Rain Sensor*1 Senses rain when the AUTO switch (windshield wiper switch assembly) is on, and sends signals to the main body ECU (multiplex network body ECU).
Windshield Wiper Switch Assembly Front Wiper Control Switch Sends the switch position signal to the steering sensor.
Rear Wiper Control Switch
Sensitivity Switch*1
Interval Time Adjuster*2
Washer Switch
Steering Sensor Sends the wiper control switch, sensitivity switch*1, interval time adjuster*2 position and washer switch signal to the windshield wiper relay assembly
Combination Meter Assembly
·

Sends the vehicle speed signal to the main body ECU (multiplex network body ECU).

·

Displays a warning message on the multi-information display when a low washer fluid level signal is received from the washer fluid level warning switch.


DLC3 The GTS can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.
Washer Nozzle Heater Assembly*3 Operates the PTC heater according to nozzle heater relay signals to prevent the washer fluid from freezing.


FUNCTION


a.

Mist Function

i.

When the MIST switch (front wiper control switch) is on, the wipers operate at LO.



b.

Rain Sensing Function (Models with Rain Sensing Function)

i.

When the AUTO switch (front wiper control switch) is on, the rain sensor mounted on the upper area of the windshield detects the amount of rain and the luminance of the surrounding area. When the rain sensor detects rain, it sends an optimal wiper timing signal to the main body ECU (multiplex network body ECU) in accordance with the vehicle speed, luminance of the surrounding area and the amount of rain detected.


ii.

The main body ECU (multiplex network body ECU) changes the operation of the windshield wiper motor assembly as shown in the following table, based on wiper operation request signals sent from the rain sensor. If a wiper HI operation request signal is received due to a sudden increase of the amount of rain, such as a splash on the windshield, the wipers are operated continuously on HI.


iii.

The rain sensor detects the luminance of the surrounding area. If the luminance changes such as when the vehicle goes in or out of a tunnel, the rain sensor sends a wiper operation request signal in accordance with the situation, enabling the wipers to operate at a comfortable setting.

Wiper Operation
Amount of Rain While Being Driven While Stopped
Large Continuously (at HI) Continuously (at LO)
↓↑ Continuously (at LO) Continuously (at LO)
↓↑ Intermittently at Approximately 0.6-second Intervals Intermittently at Approximately 0.8-second Intervals
↓↑ Intermittently at Approximately 1.2-second Intervals Intermittently at Approximately 1.6-second Intervals
↓↑ Intermittently at Approximately 2.1-second Intervals Intermittently at Approximately 3.1-second Intervals
↓↑ Intermittently at Approximately 3.5-second Intervals Intermittently at Approximately 5.4-second Intervals
↓↑ Intermittently at Approximately 5.9-second Intervals Intermittently at Approximately 9.7-second Intervals
↓↑ Intermittently at Approximately 10.1-second Intervals Intermittently at Approximately 17.5-second Intervals
Small Intermittently at Approximately 17.9-second Intervals Intermittently at Approximately 32.7-Second Intervals
No detection Not operated Not operated



c.

Rain Sensor Sensitivity Adjustment Function (Models with Rain Sensing Function)

i.

When the wiper control switch (windshield wiper switch assembly) is in AUTO, operating the sensitivity switch adjusts the sensitivity of the rain sensor to adjust the wiper operation timing.

HINT:

When the sensitivity switch is operated to the sensitive side, the wipers operate once regardless of the amount of rain.




d.

Washer-linked Wiper with Drip-prevention Function

i.

When the washer switch is turned on with the windshield wiper switch assembly set to off or AUTO*, the washer fluid sprays simultaneously. Once the washer switch is on for approximately 0.3 seconds or more, the wipers starts on LO approximately 0.2 seconds later.

*: Models with rain sensing function

HINT:

When the washer switch is on, the wipers operate at a speed lower than LO.



ii.

If the washer switch is turned off before one complete wiper operation is performed, the wipers operate 2 times on LO.


iii.

If the washer switch is turned off after at least one complete wiper operation is performed, the wipers operate 3 times on LO.


iv.

When the washer switch is turned on for approximately 0.5 seconds or more and the vehicle speed is approximately 7 km/h (4 mph) or less, the wipers operate once more after the end of this operation as shown in the following diagram.

Washer switch On Time: More than One Complete Wiper Operation
Y227538E05
4.292,4.104 4.708,4.104 4.708,4.104 4.865,3.625 true 3.344,0.208 3.604,0.208 3.604,0.208 3.75,0.823 true 4.385,0.219 4.198,0.219 4.198,0.219 4.156,0.833 true 1.635,0.115 3.406,0.458 1.771,0.344 10 false Approximately 0.3 Seconds 4.448,0.146 6.219,0.49 1.771,0.344 10 false Approximately 0.2 Seconds 2.625,0.833 2.927,1.167 0.302,0.333 10 false On 2.625,1.885 2.927,2.219 0.302,0.333 10 false On 2.604,1.427 2.906,1.76 0.302,0.333 10 false Off 2.625,2.458 2.927,2.792 0.302,0.333 10 false Off 2.271,2.792 2.969,3.083 0.698,0.292 10 false Operates 1.76,3.365 2.875,3.667 1.115,0.302 10 false Does not Operate 0.271,1.135 1.385,1.438 1.115,0.302 10 false Washer Switch 0.25,2.208 1.365,2.51 1.115,0.302 10 false Washer Motor 0.208,3.104 1.323,3.406 1.115,0.302 10 false Wiper Operation 3.51,4.031 4.344,4.458 0.833,0.427 10 false Wiper-linked Operation 5.417,3.719 6.125,4.156 0.708,0.438 10 false 3 Seconds 6.313,3.813 6.979,4.365 0.667,0.552 10 false Drip-prevention Operation



e.

Vehicle Speed-Sensing, Adjustable Interval Function

i.

When the windshield wiper switch is in the INT*1 or AUTO*2 position, the interval time of the wiper is controlled in 3 stages in accordance with the interval time adjuster position*1/sensitivity switch position*2 and the vehicle speed.

*1: Models without rain sensing function

*2: Models with rain sensing function


ii.

The interval time can be controlled steplessly within each range.

Models without Rain Sensing Function
Y210310E06
4.208,1.677 4.208,1.073 4.208,1.073 4.792,1.073 true 4.292,3.323 4.292,3.438 4.292,3.438 5.365,3.438 true 1.104,0.292 1.719,0.49 0.615,0.198 10 false Sec. 1.198,0.646 1.813,0.844 0.615,0.198 10 false 15 1.198,1.594 1.813,1.792 0.615,0.198 10 false 10 1.271,2.542 1.458,2.74 0.188,0.198 10 false 5 1.74,3.667 1.927,3.865 0.188,0.198 10 false 0 0.177,1.865 1.031,2.219 0.854,0.354 10 false Interval Time 2.406,3.635 2.875,3.833 0.469,0.198 10 false 20 (12) 3.188,3.646 3.656,3.844 0.469,0.198 10 false 40 (25) 4,3.656 4.469,3.854 0.469,0.198 10 false 60 (37) 2.219,2.25 4.177,2.552 1.958,0.302 10 false Interval Time Adjustment Range 4.646,3.594 5.385,3.854 0.74,0.26 10 false km/h (mph) 4.896,0.969 6.26,1.458 1.365,0.49 10 false Interval Time Adjuster Position: SLOW 5.427,3.333 6.771,3.75 1.344,0.417 10 false Interval Time Adjuster Position: FAST 2.75,4.021 3.74,4.417 0.99,0.396 10 false Vehicle Speed

Models with Rain Sensing Function
Y210310E07
4.208,1.677 4.208,1.073 4.208,1.073 4.792,1.073 true 4.292,3.323 4.292,3.438 4.292,3.438 5.365,3.438 true 1.104,0.292 1.719,0.49 0.615,0.198 10 false Sec. 1.198,0.646 1.813,0.844 0.615,0.198 10 false 15 1.198,1.594 1.813,1.792 0.615,0.198 10 false 10 1.271,2.542 1.458,2.74 0.188,0.198 10 false 5 1.74,3.667 1.927,3.865 0.188,0.198 10 false 0 0.177,1.865 1.031,2.219 0.854,0.354 10 false Interval Time 2.406,3.635 2.875,3.833 0.469,0.198 10 false 20 (12) 3.188,3.646 3.656,3.844 0.469,0.198 10 false 40 (25) 4,3.656 4.469,3.854 0.469,0.198 10 false 60 (37) 2.417,2.25 4.052,2.563 1.635,0.313 10 false Sensitivity Switch Range 4.646,3.594 5.385,3.854 0.74,0.26 10 false km/h (mph) 4.875,0.958 6.021,1.396 1.146,0.438 10 false Sensitivity Switch Position: SLOW 5.427,3.333 6.573,3.781 1.146,0.448 10 false Sensitivity Switch Position: FAST 2.75,4.021 3.74,4.417 0.99,0.396 10 false Vehicle Speed



f.

Vehicle Speed Switching Function

i.

When the windshield wiper switch is in the LO position and the vehicle stops moving, wiper operation is automatically switched to intermittent operation.


ii.

If the wiper control switch is changed from a position other than LO*1 to LO while the vehicle is stopped, the wipers operate 3 times, and then automatically switch to intermittent operation (the wipers operate at approximately 2.5-second intervals). Also, when the interval time adjuster position*2/sensitivity switch position*3 is FAST, the wipers operate on LO even while the vehicle is stopped.

*1: Except OFF

*2: Models without rain sensing function

*3: Models with rain sensing function

Y210246E07
4.458,3.844 5.323,4.094 0.865,0.25 10 false LO Operation 2.677,3.823 4.146,4.167 1.469,0.344 10 false Except LO Operation*1 5.896,3.865 6.76,4.115 0.865,0.25 10 false INT Operation 5.573,2.521 5.74,2.781 0.167,0.26 10 false T1 6.021,2.51 6.188,2.771 0.167,0.26 10 false T1 6.469,2.5 6.635,2.76 0.167,0.26 10 false T1 4.344,2.427 5.385,2.688 1.042,0.26 10 false Operates Thrice 0.24,0.646 1.615,0.865 1.375,0.219 10 false Wiper Control Switch 2.375,0.396 2.594,0.594 0.219,0.198 10 false LO 1.74,0.885 2.604,1.198 0.865,0.313 10 false Except LO*1 0.26,1.281 1.615,2.188 1.354,0.906 10 false Interval Time Adjuster Position*2/Sensitivity Switch Position*3 2.177,1.313 2.615,1.531 0.438,0.219 10 false FAST 1.729,1.677 2.604,1.948 0.875,0.271 10 false Except FAST 0.521,4.385 2.656,4.604 2.135,0.219 10 false T1: Approximately 2.5 seconds 1.979,3.083 2.646,3.333 0.667,0.25 10 false Operating 2.052,3.688 2.656,3.938 0.604,0.25 10 false Stopped 0.26,3.438 1.385,3.688 1.125,0.25 10 false Wiper Operation 0.542,4.115 1.604,4.365 1.063,0.25 10 false *1: Except OFF 1.688,4.115 4.396,4.385 2.708,0.271 10 false *2: Models without Rain Sensing Function 4.396,4.125 6.885,4.385 2.49,0.26 10 false *3: Models with Rain Sensing Function


iii.

When the vehicle stops moving and the windshield wiper switch assembly is in the LO position, the wipers operate twice in LO. It then switches to intermittent operation with an interval time of approximately 2.5 seconds. If the vehicle starts moving during this intermittent wiper operation, the wiper automatically returns to LO operation. Also, when the interval time adjuster position*1/sensitivity switch position*2 position is FAST, the wipers operate on LO even while the vehicle is stopped.

*1: Models without rain sensing function

*2: Models with rain sensing function

Y210245E07
0.146,4.521 2.073,4.719 1.927,0.198 10 false T1: Approximately 2.5 seconds 0.24,0.604 1.385,0.781 1.146,0.177 10 false Vehicle Condition 1.885,0.896 2.438,1.094 0.552,0.198 10 false Stopped 2.021,1.229 2.458,1.417 0.438,0.188 10 false FAST 1.99,0.292 2.427,0.479 0.438,0.188 10 false Driving 1.792,1.698 2.458,1.885 0.667,0.188 10 false Not FAST 1.813,3.167 2.479,3.354 0.667,0.188 10 false Operating 1.875,3.76 2.438,3.979 0.563,0.219 10 false Stopped 0.396,3.5 1.438,3.802 1.042,0.302 10 false Wiper Operation 0.25,1.438 1.635,2.146 1.385,0.708 10 false interval time adjuster position*1/sensitivity switch position*2 3.833,2.458 4.479,2.844 0.646,0.385 10 false Operates Twice 4.594,2.479 4.813,2.792 0.219,0.313 10 false T1 5.167,2.479 5.385,2.792 0.219,0.313 10 false T1 3.021,4.021 3.906,4.396 0.885,0.375 10 false LO Operation 4.74,4.042 5.625,4.417 0.885,0.375 10 false INT Operation 6.01,4.063 6.896,4.438 0.885,0.375 10 false LO Operation 0.156,4.26 2.833,4.521 2.677,0.26 10 false *1: Models without Rain Sensing Function 2.885,4.271 5.354,4.49 2.469,0.219 10 false *2: Models with Rain Sensing Function



g.

Washer Fluid Level Warning (Models with Washer Fluid Level Warning)

i.

When the remaining amount of washer fluid is equal to or less than the specified value, "Windshield Washer Fluid Low" is displayed on the multi-information display.




FAIL-SAFE


a.

Rain Sensor

i.

The windshield wiper switch assembly performs a fail-safe function when the wiper system cannot properly receive the necessary signals for wiper system control or a wiper system component is malfunctioning.