Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
NM38G0E _59 Vehicle Exterior _101089 WIPER / WASHER _0473774 WIPER AND WASHER SYSTEM CO CONTROL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  CONTROL  CAMERA CLEANER CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Windshield Wiper Switch Assembly
·

Rear Washer Switch


Operates the camera cleaner system and sprays washer fluid on the surface of the camera lens according to rear washer switch operation.
Steering Sensor Receives rear washer switch operation signals from the windshield wiper switch assembly and sends them to the main body ECU (multiplex network body ECU) via the central gateway ECU (network gateway ECU).
Central Gateway ECU (Network Gateway ECU) Relays signals between the CAN communication lines.
Main Body ECU (Multiplex Network Body ECU) Sends windshield washer motor and pump assembly operation signals based on rear washer switch operation signals.
Windshield Wiper Relay Assembly Receives operation signals from the main body ECU (multiplex network body ECU) and operates the windshield washer motor and pump assembly.
Windshield Washer Motor and Pump Assembly Operates according to windshield wiper relay assembly signals and sprays washer fluid from the camera washer.
Camera Cleaner Nozzle Assembly Sprays washer fluid output by the windshield washer motor and pump assembly.


SYSTEM CONTROL


a.

When the rear washer switch is operated, the camera cleaner system operates linked with the rear washer system.



OPERATING CONDITION


a.

Camera Cleaner System Operation and Cancel Conditions

i.

The camera cleaner system operates when all of the following conditions are met.

·

The ignition switch is turned to ON.

·

The rear washer switch is operated.



ii.

The camera cleaner system stops operating when either of the following conditions is met.

·

The ignition switch is turned from ON to ACC or off.

·

The rear washer switch operation is stopped.