Home › Vehicle Exterior › MIRROR (EXT) › MIRROR SYSTEM
NM38G0E _59 Vehicle Exterior _101091 MIRROR (EXT) _0473775 MIRROR SYSTEM CO CONTROL F

MIRROR (EXT)  MIRROR SYSTEM  CONTROL  MIRROR CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the mirror control system (without memory function) have the following functions:

Component Function
Outer Rear View Mirror Assembly LH/ RH
·

Moves the mirror surface of the outer rear view mirror assembly LH/ RH based on the mirror surface operation signal output by the outer mirror switch assembly.

·

Retraction or restoration the outer rear view mirror assembly LH/ RH based on the operation signal output by the outer mirror retractable control computer..


Outer Mirror Switch Assembly Mirror Adjust Switch Outputs the mirror surface angle adjustment signal to the outer rear view mirror assembly LH/ RH.
Mirror Select Switch Selects the outer rear view mirror assembly whose mirror surface angle is to be adjusted.
Retract/Return Switch
·

Output the mirror retraction or restoration signal to the outer mirror retractable control computer.

·

Inputs retract/return signal and operation the outer rear view mirror assembly LH/ RH.




b.

The main components in the mirror control system (with memory function) have the following functions:

Component Outline
Outer Rear View Mirror Assembly LH/ RH Adjusts the angle of the mirror surface and retracts/returns the mirror according to control signals from the outer mirror control ECU assembly LH/ RH.
Outer Mirror Control ECU Assembly LH/ RH
·

Receives operation requests/condition signals and operates the mirror motors.

·

Inputs switch signals from the seat memory switch and outputs them to the multiplex network body ECU.


Central Gateway ECU (Network Gateway ECU) Relays CAN communication signals.
ECM Sends shift position signals to the multiplex network body ECU via CAN communication.
Main Body ECU (Multiplex Network Body ECU)
·

Inputs shift position signals from the ECM and outputs mirror surface operation command signals to the outer mirror control ECU assembly LH/ RH.

·

Memorizes/recalls the mirror surface position to/from the outer mirror control ECU assembly LH/ RH.


Certification ECU (Smart Key ECU Assembly) Inputs door lock/unlock request signals from the multiplex network body ECU.
Courtesy Light Switch Outputs driver door open/close signals to the multiplex network body ECU.
Seat Memory Switch Outputs "SET", "1", "2" and "3" switch operation signals to the outer mirror control ECU assembly LH/ RH.
Outer Mirror Switch Assembly (Multiplex Network Master Switch Assembly) Mirror Surface Angle Adjustment Switch Outputs mirror surface angle adjustment signals to the outer mirror control ECU assembly LH/ RH according to switch operations.
Right/Left Selector Switch Outputs left/right switching signals to the outer mirror control ECU assembly LH/ RH according to switch operations.
Retract/Return Switch Outputs retract/return signals to the outer mirror control ECU assembly LH/ RH according to switch operations.
Auto Retract/Return Switch Outputs operation switching signals of the auto power retract/return function to the outer mirror control ECU assembly LH/ RH according to switch operations.
DLC3 The DTCs of malfunctioning parts can be read by connecting a diagnostic tool.



SYSTEM CONTROL


a.

Automatic Glare-resistant Electrochromic (EC) Dimming Function

i.

This function operates when both of the following conditions are met:

·

The AUTO switch of the inner rear view mirror assembly is pushed to select AUTO mode (when the engine switch is turned from off to on (IG), this system defaults to AUTO mode).

·

The inner rear view mirror assembly detects a large difference between the brightness of the surroundings and the headlights of a following car.




b.

Reverse-linked Function

i.

This function operates when all of the following conditions are met:

·

The ignition switch is on (IG).

·

Either the R or L position of the right/left selector switch has been selected.

·

The shift position is moved to R.




c.

Memory System (Mirror Surface Position Memory Function)

i.

This function operates when any of the following conditions is met:

·

The seat memory switch is operated with the ignition switch on (IG), the shift position in P and the mirror position stored in the memory system.

·

The seat memory switch is operated within approximately 180 seconds of opening the driver door with the ignition switch off and the mirror position stored in the memory system.

·

The seat memory switch is operated within approximately 60 seconds of closing the driver door with the ignition switch off and the mirror position stored in the memory system.

·

With the ignition switch off, the driver door closed and the key ID registration of the memory call function complete, the doors are unlocked using the entry and start system or wireless door unlock function and then the driver door is opened.





FUNCTION


a.

The outer rear view mirrors have the following functions:

Function Outline
Electric Remote Mirrors Remote Control Function The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch (multiplex network master switch assembly).
Reverse-linked Function This function tilts the mirror surface downward to improve visibility when reversing. If the mirror surface is adjusted via the outer mirror switch (multiplex network master switch assembly) while the reverse-linked function is operating, the new mirror position is stored as the default reverse-linked mirror position.
Electric Retractable Mirrors Manually-retractable Function This function retracts the outside rear view mirrors when the retractable switch is pressed.
Automatically-retractable Function
·

When all doors are locked from the outside of the vehicle while the ignition switch is off, the outside rear view mirrors are retracted.

·

When all doors are unlocked from the outside of the vehicle while the ignition switch is off, the outside rear view mirrors are returned to their original position.


Automatic Glare-resistant Electrochromic (EC) Dimming Function During nighttime driving, if a large difference in intensity exists between the surrounding light and the light reflected off the inner rear view mirror assembly from the headlights of a following car, the automatic glare-resistant Electrochromic (EC) dimming function automatically reduces the reflection rate of the inner and outer rear view mirrors and thus dampens the glare from the mirrors.
Memory System This system stores the driver seat, outer rear view mirror and tilt and telescopic steering positions. Up to 3 memory positions can be stored in the system memory and recalled.



OPERATING CONDITION


Function Condition User Operation Operation
Manually-retractable Function Ignition switch is on (ACC) or on (IG) Operates retract/return switch Retracts/returns*1
Automatically-retractable Function Auto retract/return switch is on with ignition switch off Locks/unlocks door*2 Automatically retracts/returns
Reverse-linked Function Reversing vehicle (left/right selection switch is R or L) Shift position is changed to R Automatically tilts down mirror surface angle of outer rear view mirror assembly*3
Memory System*4 Driving position is memorized with ignition switch on (IG) and shift position P Operates seat memory switch Memorizes/recalls mirror surface angle of outer rear view mirror assembly for up to 3 positions
If driving position is memorized with ignition switch off and shift position P, within approximately 60 seconds after closing driver door or within approximately 180 seconds after opening driver door
Driving position is memorized with ignition switch off and driver door closed Opens driver door after door unlock operation is performed by entry operation or wireless door lock/unlock operation.

HINT:

*1: If the power source is turned off while a retract or return operation is in progress, the mirror continues to operate until the retract or return operation completes.

*2: Settings can be changed using the customization function. Refer to the Repair Manual for details.

*3: The default down tilt value is approximately 6.5° for the driver side mirror and approximately 5.6° for the passenger side mirror. Furthermore, after the shift position is changed to R and the mirror surface angle of the outer rear view mirror assembly automatically tilts down, the mirror surface position when reversing can be set as desired by operating the mirror surface angle adjustment switch.

*4: For details of the mirror surface position memory function, see the Power Seat Control System section.