Home › Engine / Hybrid System › V35A-FTS (FUEL) › FUEL SYSTEM
NM38G0E _51 Engine / Hybrid System _101629 V35A-FTS FUEL _0473856 FUEL SYSTEM DE DETAILS F

V35A-FTS FUEL  FUEL SYSTEM  DETAILS  FUEL PUMP (FOR HIGH PRESSURE)  


CONSTRUCTION


a.

A high efficiency 1-plunger type fuel pump assembly (for high pressure) is used to reduce drive torque.


b.

The fuel pump assembly (for high pressure) consists of the following parts:

i.

A spill control valve which adjusts the discharged amount of high pressure fuel


ii.

A plunger which is driven by the camshaft to pressurize the fuel


iii.

A check valve which mechanically opens and closes the path to the fuel delivery pipe (for high pressure)



c.

A roller lifter (fuel pump lifter assembly) is used to drive the plunger. As a result, high engine output and high fuel pressure are supported.


d.

A fuel pressure pulsation damper is installed inside the fuel pump assembly (for high pressure).


e.

The fuel pump assembly (for high pressure) is installed to the camshaft bearing cap via the cylinder head cover sub-assembly and is driven by the cam installed to the exhaust camshaft (camshaft).


f.

The fuel in the fuel tank sent by the fuel pump is pressurized in response to driving conditions to a maximum 20 MPa, and the quantity required by the injector is sent to the delivery pipe.


g.

A metal touch taper seal is used for the fuel pipe (for high pressure) fastener.

W147423C01
0.469,1.25 1.125,1.25 true 1.292,2.854 2.208,2.854 true 4.24,1.271 4.406,1.448 true 4.958,0.958 5.219,1.406 true 4.625,1.719 4.313,2.063 true 2.438,5.115 3.125,5.115 true 2.458,5.49 2.906,5.844 true 2.625,4.99 3.125,4.729 true 2.25,4.875 1.917,4.271 true 2.156,5.104 1.74,5.771 true 4.177,4.521 4.177,4.958 true 4.708,4.344 4.979,4.344 true 4.625,5.198 4.75,5.198 true 5.396,4.833 5.531,4.385 true 5.563,5.594 5.563,5.344 true 0.271,1.188 0.583,1.344 0.313,0.156 10 false *1 1.083,2.792 1.396,3.083 0.313,0.292 10 false *2 4.063,1.156 4.427,1.469 0.365,0.313 10 false *3 4.802,0.823 5.125,1.042 0.323,0.219 10 false *4 4.156,2.094 4.417,2.333 0.26,0.24 10 false *5 1.792,4.115 2.073,4.365 0.281,0.25 10 false *7 1.604,5.802 1.917,6.063 0.313,0.26 10 false *8 2.958,5.844 3.25,6.073 0.292,0.229 10 false *9 3.208,5.052 3.51,5.302 0.302,0.25 10 false *10 3.177,4.646 3.552,4.844 0.375,0.198 10 false *11 4,4 4.333,4.229 0.333,0.229 10 false *12 4.052,5.021 4.344,5.24 0.292,0.219 10 false *13 4.802,5.146 5.073,5.354 0.271,0.208 10 false *14 5.479,4.24 5.771,4.438 0.292,0.198 10 false *15 5.438,5.625 5.729,5.833 0.292,0.208 10 false *16 4.469,6.229 4.75,6.438 0.281,0.208 10 false *17 0.563,5.854 0.885,6.094 0.323,0.24 10 false *18 6.104,4.656 6.333,4.865 0.229,0.208 10 false *a 3.698,4.25 3.906,4.458 0.208,0.208 10 false *b 2.313,3.24 2.583,3.438 0.271,0.198 10 false *c 6.531,3 6.844,3.229 0.313,0.229 10 false *d 5.052,4.271 5.365,4.427 0.313,0.156 10 false *1 2.292,5.969 2.615,6.219 0.323,0.25 10 false *6
*1 Spill Control Valve *2 Roller Lifter (Fuel Pump Lifter Assembly)
*3 Fuel Pressure Sensor (for High pressure) *4 No. 2 Fuel Delivery Pipe Sub-assembly (for Direct Injection)
*5 Direct Fuel Injector Assembly *6 Fuel Tank Assembly
*7 Fuel Main Valve Assembly *8 Jet Pump
*9 Fuel Pump Assembly (for Low Pressure) *10 Fuel Filter
*11 Fuel Main Valve Assembly *12 Fuel Pump Assembly (for High Pressure)
*13 Fuel Pressure Pulsation Damper *14 Plunger
*15 Check Valve *16 Relief Valve
*17 Exhaust Camshaft Sub-assembly *18 Fuel Sub Tank Assembly
*a High-pressure Fuel System (to Fuel Delivery Pipe (for Direct Injection)) *b Low-pressure Fuel System (from Fuel Tank Assembly)
*c To Fuel Delivery Pipe (for Port Injection) *d Pipe of High-pressure Fuel System




OPERATION


a.

The plunger moves vertically to pressurize the fuel. The fuel is controlled to the necessary fuel pressure by closing the spill control valve, which is installed on the suction side of the fuel pump assembly (for high pressure), at the optimal timing during the compression stroke. When the spill control valve closes at an early timing, the effective stroke of the plunger becomes longer, increasing the fuel pressure.


b.

The fuel, which is pressurized by the plunger and controlled to between 2.4 and 20 MPa, pushes open the check valve and is pressure-fed to the fuel delivery pipe (for direct injection).


c.

The fuel pressure is detected by the fuel pressure sensor installed in the fuel delivery pipe (for direct injection) and feedback control is performed by the ECM to control the fuel pressure to the target value.


d.

When a fuel pressure becomes too high in the high-pressure fuel system, the relief valve opens to leak fuel and suppress the fuel pressure to or below the rated working pressure of the system.

W130956E02
0.417,2.281 0.479,1.802 0.479,1.802 0.74,1.802 true 1.521,1.427 1.865,1.427 1.865,1.427 2.094,0.615 true 2.594,0.5 2.646,0.135 2.646,0.135 2.865,0.135 true 4.313,0.635 4.271,0.135 4.271,0.135 4.083,0.135 true 4.729,0.521 4.979,0.083 4.979,0.083 5.167,0.083 true 5.927,0.896 6.146,0.76 6.146,0.76 6.365,0.76 true 5.948,1.063 6.198,1.271 6.198,1.271 6.406,1.271 true 6.604,3.031 6.427,1.896 6.427,1.896 6.198,1.896 true 4.104,3.104 4.042,2.375 4.042,2.375 3.833,2.375 true 1.042,2.542 1.323,2.385 1.323,2.385 1.49,2.385 true 0.958,3.313 1.396,3.813 1.396,3.813 1.615,3.813 true 2.938,0.063 3.479,0.365 0.542,0.302 10 false Suction 3.563,0.063 4.094,0.396 0.531,0.333 10 false Inactive 5.24,0.021 6.344,0.365 1.104,0.344 10 false Pressure Rise 6.417,0.698 7.031,0.896 0.615,0.198 10 false Open 6.458,1.188 6.979,1.531 0.521,0.344 10 false Closed 3.604,1.26 5.49,1.635 1.885,0.375 10 false Valve Closing Timing Control 0.594,1.344 1.531,1.656 0.938,0.313 10 false Pressure Rise 0.115,0.885 1.292,1.281 1.177,0.396 10 false Spill Control Valve 0.542,0.49 1.292,0.854 0.75,0.365 10 false Plunger Lift 0.813,1.719 3.417,2.146 2.604,0.427 10 false Fuel Pump Assembly (for High Pressure) 3.635,1.823 6.198,2.208 2.563,0.385 10 false To Fuel Delivery Pipe (for Direct Injection) 3.385,2.302 3.823,3.031 0.438,0.729 10 false Check Valve 1.552,2.323 2.344,2.969 0.792,0.646 10 false Spill Control Valve 1.688,3.74 2.24,4.24 0.552,0.5 10 false Plunger 5.406,5.156 6.667,5.479 1.26,0.323 10 false Pressure Rise 3.26,5.156 3.948,5.406 0.688,0.25 10 false Inactive 1.083,5.156 1.885,5.542 0.802,0.385 10 false Suction 5.063,6.448 6.542,7.292 1.479,0.844 10 false From Fuel Delivery Pipe (for Direct Injection) 3.927,7.052 4.313,7.813 0.385,0.76 10 false Relief Valve 3.51,8.51 4.125,8.708 0.615,0.198 10 false Relief