FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| ECM | Sends control signals to the electronic control fan coupling. |
| Fluid Coupling Assembly | Changes the fan speed based on signals from the ECM. |
| Engine Coolant Temperature Sensor | Detects the engine coolant temperature by means of an internal thermistor. |
| Crank Position Sensor | Detects the engine speed and performs the cylinder identification. |
| Accelerator Pedal Position Sensor | Detects the amount of pedal effort applied to the accelerator pedal. |
| No. 2 Skid Control ECU | Sends vehicle speed signals to the ECM. |
| Air Conditioning Amplifier Assembly | Sends the air conditioning operation status to the ECM. |
FUNCTION
The ECM controls the cooling fan speed based on the engine coolant temperature, air conditioning operation status, engine speed, accelerator pedal opening and vehicle speed.
During high load
The coupling engagement ratio is increased to increase the fan speed and improve engine cooling performance.
During initial engine warm-up, light and medium load
Oil in the coupling is removed and the coupling engagement ratio is reduced to suppress fan co-rotation and improve quietness.
During request from air conditioning system
The coupling engagement ratio is increased to increase air flow to the condenser and maximize cooling performance.