OUTLINE
Optimized resin that is resistant to thermal deterioration is used for the No. 1 water outlet pipe and No. 2 water outlet pipe to achieve weight reduction.
A drive belt operated mechanical water pump is used.
A cross flow type radiator is used.
A thermostat with a bypass is located on the water inlet sub-assembly.
| *1 | Radiator Assembly | *2 | Water Inlet Sub-assembly with Thermostat |
| *3 | Engine Water Pump Assembly | *4 | Cylinder Block Sub-assembly |
| *5 | Cylinder Head Sub-assembly | *6 | Cylinder Head Sub-assembly LH |
| *7 | Water Outlet Pipe | *8 | Heater Water Pump (Heater Accessory Assembly) |
| *9 | Heater Radiator Unit Sub-assembly | *10 | Throttle Body with Motor Assembly |
| *11 | Oil Cooler Assembly | *12 | Engine Coolant Temperature Sensor |
| *13 | ATF Cooler | - | - |
| *a | Radiator Port | *b | Oil Cooler Port |
| *c | Heater Port | - | - |
SPECIFICATION
Engine Coolant
| Type | Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids). Do not use plain water alone. | |
| Color | Pink | |
| Maintenance Intervals | First Time | 160000 km (100000 miles) |
| Subsequent | Every 80000 km (50000 miles) | |
SLLC is pre-mixed (50% coolant and 50% deionized water), and therefore does not need to be diluted.
Thermostat
| Thermostat Operating Temperature | 80°C to 84°C (176°F to 183°F) |