CONSTRUCTION
The gear train is composed of 2 sets of multi-plate type brakes, 4 sets of multi-plate type clutches and 3 sets of planetary gear units.
The tooth number, position and contact area of the gears are optimized to reduce the amount of gear noise.
Optimally-designed groove shapes are used in the friction material of the clutch and brake portions to reduce losses due to drag. As a result, this helps improve fuel economy performance.
| *1 | No. 1 Brake (B1) | *2 | Front Planetary Gear Unit |
| *3 | No. 3 Clutch (C3) | *4 | Middle Planetary Gear Unit |
| *5 | Rear Planetary Gear Unit | *6 | No. 4 Clutch (C4) |
| *7 | No. 2 Brake (B2) | *8 | No. 1 Clutch (C1) |
| *9 | No. 2 Clutch (C2) | - | - |
| *1 | Front Planetary Long Pinion Gear | *2 | Input Shaft |
| *3 | Front Planetary Large Sun Gear | *4 | Front Planetary Gear Unit |
| *5 | Front Planetary Ring Gear | *6 | Front Planetary Short Pinion Gear |
| *7 | Front Planetary Small Sun Gear | *8 | Middle Planetary Ring Gear |
| *9 | Middle Planetary Gear Unit | *10 | Rear Planetary Ring Gear |
| *11 | Rear Planetary Gear Unit | *12 | Output Shaft |
| *13 | Middle/Rear Planetary Sun Gear | *14 | Rear Planetary Pinion Gear |
| *15 | Middle Planetary Pinion Gear | - | - |
| C1 | No. 1 Clutch | C2 | No. 2 Clutch |
| C3 | No. 3 Clutch | C4 | No. 4 Clutch |
| B1 | No. 1 Brake | B2 | No. 2 Brake |
| Component | Operation |
|---|---|
| No. 1 Clutch (C1) |
·
Connects the front planetary ring gear and middle/rear planetary sun gear.
·
Connects the middle/rear planetary sun gear and middle planetary ring gear when the No. 3 clutch is in operation. |
| No. 2 Clutch (C2) |
·
Connects the front planetary small sun gear and rear planetary sun gear.
·
Connects the front planetary small sun gear and front planetary ring gear when the No. 1 clutch is in operation. |
| No. 3 Clutch (C3) |
·
Connects the front planetary ring gear and middle planetary ring gear.
·
Connects the middle/rear planetary sun gear and middle planetary ring gear when the No. 1 clutch is in operation. |
| No. 4 Clutch (C4) | Connects the middle planetary carrier and rear planetary ring gear. |
| No. 1 Brake (B1) | Locks the rotation of the front planetary large sun gear. |
| No. 2 Brake (B2) |
·
Locks the rotation of the middle planetary ring gear.
·
Locks the rotation of the front planetary ring gear when the No. 3 clutch is in operation. |
OPERATION
Transmission Power Flow
○: On
X: Off
▲: Control
●: When lockup is operating, SL is off and SLU is on. When lockup is not operating, SL is on and SLU is off.
○: Operates
X: Does not Operate
▲: Control
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |
|
Input |
|
Operation |