Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM › 2021.04–2021.07
NM38G0E _52 Drivetrain _102526 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0474224 AUTOMATIC TRANSMISSION SYSTEM GE GENERAL F

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  GENERAL  GENERAL  


OUTLINE


·

An AJA0F 10-speed automatic transmission (direct shift-10AT) is used.

·

A lightweight, compact and highly efficient 10-speed gear train is used.

·

A wide range of gear ratios is used, dramatically improving start-off acceleration performance by using a low gear ratio for the 1st gear and fuel economy at high speeds by using a high gear ratio for the 10th gear. Also, a close gear ratio is used for the low gear positions to achieve rhythmical gear changes. Furthermore, the transmission constantly selects the optimal gear ratio to achieve improved fuel economy in situations such as city driving.

·

The gear train is composed of 3 planetary gears. Also, the gear train uses a 2-stage clutch mechanism and aluminum parts, achieving weight reduction and compactness. As a result, superior packaging is also ensured.

·

An oil level detection mechanism (overflow method) is used. For details of fluid filling and adjustment procedures, refer to the Repair Manual.

·

Due to the use of stop and start control, an oil pump with motor assembly is installed in the transmission valve body assembly. When the engine is restarted after an idling stop is performed by stop and start control, the oil pressure required for the clutch and brake engagement is supplied to make smooth starting off possible. For details, see the Idling Stop Control section.*

*: Models with stop and start system



SPECIFICATION


a.

Automatic Transmission Assembly

*: Weight shows the figure with the fluid fully filled.

Gear Ratio 1st 4.923
2nd 3.257
3rd 2.349
4th 1.944
5th 1.532
6th 1.193
7th 1.000
8th 0.801
9th 0.661
10th 0.613
Reverse 4.307
Fluid Type Toyota Genuine ATF WS
Fluid Capacity Models without Stop and Start System 10.9 Liters (11.5 US qts, 9.6 Imp. qts)
Models with Stop and Start System 11.0 Liters (11.6 US qts, 9.7 Imp. qts)
Weight (Reference)* Models without Stop and Start System 109.8 kg (242.1 lb)
Models with Stop and Start System 110.5 kg (243.6 lb)


b.

Planetary Gears

Front Planetary Gear Unit No. of Large Sun Gear Teeth 46
No. of Small Sun Gear Teeth 42
No. of Long Pinion Gear Teeth 21
No. of Short Pinion Gear Teeth 20
No. of Ring Gear Teeth 90
Middle Planetary Gear Unit No. of Sun Gear Teeth 26
No. of Pinion Gear Teeth 36
No. of Ring Gear Teeth 102
Rear Planetary Gear Unit No. of Sun Gear Teeth 26
No. of Pinion Gear Teeth 27
No. of Ring Gear Teeth 82


c.

Friction Engagement Components

No. 1 Clutch (C1) No. of Discs 6
No. 2 Clutch (C2) 7
No. 3 Clutch (C3) 6
No. 4 Clutch (C4) 5
No. 1 Brake (B1) No. of Discs 4
No. 2 Brake (B2) 5


d.

Torque Converter Assembly

Torque Converter Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.62



MAIN FEATURES


a.

Aim of Development

1.

A direct driving feel

2.

Rhythmical shifting

3.

A powerful and linear feeling of acceleration

4.

Superior fuel economy performance

5.

A top-class level of compactness

6.

Achieving both quietness when driving at high speed and off-road driveability



b.

Close Gear Ratios and Wide Gear Ratios

·

Close gear ratios are used to achieve rhythmical shifting with a good tempo during acceleration.

X136933E04
2.521,0.844 2.917,0.354 2.917,0.354 3.26,0.354 true 0.333,0.667 0.958,1.094 0.625,0.427 11 false Engine Speed 0.333,3.385 0.958,3.813 0.625,0.427 11 false Engine Speed 3.333,0.281 6.125,0.708 2.792,0.427 11 false Rhythmical Shifting with Good Tempo 2.604,2.052 3.229,2.479 0.625,0.427 11 false 2nd 3.74,2.052 4.365,2.479 0.625,0.427 11 false 3rd 4.927,2.052 5.552,2.479 0.625,0.427 11 false 4th 5.99,2.052 6.615,2.479 0.625,0.427 11 false 5th 6.229,2.563 6.854,2.99 0.625,0.427 11 false Time 6.24,5.26 6.865,5.688 0.625,0.427 11 false Time 2.406,5.375 4.938,5.802 2.531,0.427 11 false 8-speed Automatic Transmission 2.604,4.76 3.229,5.188 0.625,0.427 11 false 2nd 4.469,4.771 5.094,5.198 0.625,0.427 11 false 3rd 5.99,4.771 6.615,5.198 0.625,0.427 11 false 4th 3.323,2.667 3.948,3.094 0.625,0.427 11 false AJA0F


·

Wide gear ratios are used to achieve smooth and powerful start-off acceleration performance in low gears and suppress the engine speed in high gears, achieving quiet and relaxed high-speed driving. As a result, start-off performance and quietness are improved.

X149209E01
0.417,0.698 1.26,1.135 0.844,0.438 10 false AJA0F 0.031,2.688 1.229,3.438 1.198,0.75 10 false 8-speed Automatic Transmission 0.073,1.938 1.198,2.5 1.125,0.563 10 false Improved Start-off Performance 0.948,0.281 2.042,0.823 1.094,0.542 10 false 1st 2,0.281 2.698,0.76 0.698,0.479 10 false 2nd 2.76,0.281 3.698,0.802 0.938,0.521 10 false 3rd 3.313,0.281 4.063,0.76 0.75,0.479 10 false 4th 3.927,0.281 4.635,0.781 0.708,0.5 10 false 5th 4.438,0.281 5.323,0.844 0.885,0.563 10 false 6th 4.885,0.281 5.583,0.781 0.698,0.5 10 false 7th 5.469,0.292 6.073,0.823 0.604,0.531 10 false 8th 5.99,0.281 6.771,0.813 0.781,0.531 10 false 9th 6.25,0.292 6.792,0.792 0.542,0.5 10 false 10th 1.115,3.229 1.885,3.427 0.771,0.198 10 false 1st 2.427,3.229 3.198,3.427 0.771,0.198 10 false 2nd 3.375,3.229 4.146,3.427 0.771,0.198 10 false 3rd 3.958,3.229 4.729,3.427 0.771,0.198 10 false 4th 6.125,2.073 6.781,2.729 0.656,0.656 10 false Improved Quietness 4.396,3.229 5.167,3.427 0.771,0.198 10 false 5th 4.917,3.229 5.688,3.427 0.771,0.198 10 false 6th 5.396,3.229 6.167,3.427 0.771,0.198 10 false 7th 5.844,3.229 6.615,3.427 0.771,0.198 10 false 8th



c.

Motive Force Characteristics That Draw Out the Engine Characteristics and Optimization of Shift Timing

i.

Motive force characteristics and downshift timing responsive to the accelerator operation of the driver have been optimized to achieve pleasant driving by drawing out the engine characteristics.

·

When the accelerator pedal is depressed strongly to draw out smooth torque characteristics up to high engine speed ranges, pleasant acceleration is provided by the motive force characteristics that emphasize a forceful feel and the shift timing.

X153620E01
4.26,2.625 5,2.365 true 4.979,1.01 5.125,1.177 true 2.573,0.854 2.979,0.344 true 4.219,1.552 5.125,1.646 true 0.146,0.969 2.365,1.563 2.219,0.594 10 false Accelerator Pedal Opening Angle 1.302,1.406 3.521,2 2.219,0.594 10 false Engine Speed 1.292,1.833 3.51,2.427 2.219,0.594 10 false Engine Torque 1.333,2.146 3.552,2.74 2.219,0.594 10 false Gear Position 3.365,3.156 5.583,3.75 2.219,0.594 10 false Time 1.417,2.927 3.635,3.521 2.219,0.594 10 false Acceleration 5.708,3.438 7.156,3.802 1.448,0.365 10 false AJA0F 5.635,2.969 6.802,3.698 1.167,0.729 10 false 8-speed Automatic Transmission 5.073,2.219 6.51,3.104 1.438,0.885 10 false Emphasizes Feeling of Acceleration 5.167,1.125 7.156,1.698 1.99,0.573 10 false Sharp Engine Speed Increases 3.01,0.25 5.229,0.844 2.219,0.594 10 false Accelerator Pedal Operated 5.177,1.583 7.156,2.438 1.979,0.854 10 false Smooth Torque Characteristics