Home › Drivetrain › AJA0F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM
NM38G0E _52 Drivetrain _102526 AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE _0474224 AUTOMATIC TRANSMISSION SYSTEM CO CONTROL F

AJA0F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM  CONTROL  AUTOMATIC TRANSMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with MTS switch

*2: Models with second start switch

*3: Models with stop and start system

Solenoid Valve SL1 Controls the No. 1 clutch (C1) pressure.
Solenoid Valve SL2 Controls the No. 2 clutch (C2) pressure.
Solenoid Valve SL3 Controls the No. 3 clutch (C3) pressure.
Solenoid Valve SL4 Controls the No. 4 clutch (C4) pressure.
Solenoid Valve SL5 Controls the No. 1 brake (B1) pressure.
Solenoid Valve SL6 Controls the No. 2 brake (B2) pressure.
Solenoid Valve SC1 Switches the No. 2 B2 apply control valve.
Solenoid Valve SLT Controls the line pressure.
Solenoid Valve SLU Controls the lock-up clutch pressure.
Solenoid Valve SL Switches the lock-up relay valve.
Solenoid Valve SR
·

Switches the sequence valve.

·

Switches the No. 1 B2 apply control valve.


Transmission Revolution Sensor (NT) Detects the input speed of the transmission.
Transmission Revolution Sensor (SP2) Detects the output speed of the transmission.
No. 1 ATF Temperature Sensor Detects the ATF temperature.
No. 2 ATF Temperature Sensor
Airbag ECU (Airbag ECU Assembly) Yawrate Sensor
·

Detects the vehicle's longitudinal and lateral acceleration.

·

Detects the vehicle's yaw rate.


Accelerator Pedal Sensor Assembly Detects the accelerator pedal opening angle.
Stop Light Switch Assembly Detects the brake pedal depressing signal.
Park/Neutral Position Switch Assembly Detects the shift lever position (P, R, N, D).
Transmission Floor Shift Assembly Transmission Control Switch
·

Detects that the shift lever is in M.

·

Detects the driver's upshift and downshift operations when the shift lever is in M.


Integration Control and Panel Sub-assembly DRIVE MODE Switch Switches the driving mode select on and off.
MTS Switch*1 Switches multi-terrain select on and off.
MODE SELECT Switch
·

Switches the drive mode select.

·

Switches the multi-terrain select mode.*1


Second Start Switch*2 Sends a second start mode signal to the ECM.
Combination Meter Assembly MIL Illuminates or blinks to inform the driver when the ECM detects a malfunction.
Multi-information Display
·

Displays the warning message when the ECM detects a malfunction.

·

Warns the driver by displaying a message when the ATF is at a high temperature.


Buzzer
·

Sounds when a shift-down operation is rejected.

·

Sounds together with a message display on the multi-information display during a system malfunction.


ECM Controls engine output in response to signals from the transmission ontrol ECU assembly.
Transmission Control ECU Assembly
·

Controls each shift solenoid valve in response to a signal from each sensor and switch.

·

Makes a diagnosis and memorizes the failed section when the TCM detects a malfunction.


Brake Actuator Assembly
·

No. 2 Skid Control ECU


Sends information about the operation conditions of the brake control system to the ECM.
Forward Recognition Camera Sends acceleration and deceleration request signals to the ECM.
Oil Pump with Motor Assembly*3 Holds the AT oil pressure during idle stop.


SYSTEM CONTROL


·

The AJA0F 10-speed automatic transmission uses the following controls.


Control Function
Shift Timing Control Performs shifting control according to the shift position, vehicle speed, accelerator opening angle and driving conditions.
Driving Response and Acceleration Management System (DRAMS) Integrates controls for the engine, transmission and related systems, which form the base for the vehicle's motive force, to improve maneuverability and comfort and achieve a superior driving feel.
Direct Connected Downshift Control Uses a control to perform shifting in order, high-precision oil pressure control and highly responsive shift solenoid valves to achieve linear engine speed changes during downshifting and smooth motive force changes that are linked with the engine speed.
M Mode Control Uses gear hold control, high response upshift control, blipping downshift control and complete lock-up control to improve the response and feel of manual operations, providing driving pleasure during sporty driving.
Coast Downshift Control Achieves low fuel consumption by performing fuel cut control as long as possible during deceleration.
Lock-up Timing Control Performs lock-up timing control according to the shift position, vehicle speed, accelerator opening angle and driving conditions.
Flex Lock-up Clutch Control Generates stable lock-up clutch sliding to make lock-up operation possible in a wider range, achieving superior fuel efficiency characteristics.
Drive Mode Select Makes it possible to select the driving mode by performing switch operations.
Artificial Intelligence-shift Control (AI-shift Control) Automatically switches the shift pattern according to road conditions and the driver's intentions.
Line Pressure Control Controls the line hydraulic pressure to the optimal pressure based on engine torque information.
Line Pressure Optimal Control Uses the shift solenoid valves to precisely control the clutch hydraulic pressure according to the engine output and driving conditions.
Clutch to Clutch Pressure Control Uses the shift solenoid valves to directly control the clutch and brake, making it possible to achieve a compact transmission and perform high-precision shifting control.
Differential Protection Control Prohibits gear shifting to protect the differential when a large speed difference occurs between the left and right driving wheels (such as when the left and right driving wheels are traveling on surfaces with different friction coefficients).
ATF High Temperature Control Switches from the normal shift pattern to the high oil temperature shift pattern to prevent the oil temperature from increasing further when the oil temperature is high.

a.

Driving Response and Acceleration Management System (DRAMS)

·

A system for integrally controlling the motive force, which has been named the Driving Response and Acceleration Management System (DRAMS), is used. This system achieves a more optimal driving feel (including the vehicle behavior) by considering driver requests and the surrounding environment. It integrates controls for the engine, transmission and related systems, which form the base for the vehicle's motive force, to improve maneuverability and comfort.

·

The Driving Response and Acceleration Management System (DRAMS), converts accelerator pedal operations into the motive force requested by the driver, judges the engine torque and gear position required to achieve that requested motive force, and integrally controls the engine and transmission. As a result, the motive force desired by the driver is generated, achieving a superior driving feel. In addition, DRAMS integrative control is performed according to the motive force requested by VDIM and the cruise control system, improving the control performance of the systems.

·

High speed responsiveness according to the driver's intentions and a superior driving feeling are achieved even during a shift transition, start-off and deceleration.

X150089E04
2.031,1.906 2.948,2.104 0.917,0.198 10 false Engine 3.104,1.802 4.25,2.375 1.146,0.573 10 false Automatic Transmission 5.479,0.938 5.906,1.385 0.427,0.448 10 false Drive Force 6.26,1.552 7.063,1.823 0.802,0.271 10 false Time 5.729,2.396 6.75,2.885 1.021,0.49 10 false Generated Drive Force 3.24,3.646 4.594,3.927 1.354,0.281 10 false - ETCS-i Control 3.24,3.938 4.573,4.167 1.333,0.229 10 false - ESA Control 5.208,3.479 6.708,4.042 1.5,0.563 10 false Transmission Control 5.115,4.604 6.198,5.26 1.083,0.656 10 false Determination of Appropriate Gear 3.219,4.604 4.917,5.313 1.698,0.708 10 false Determination of Necessary Engine Torque 0.698,4.406 2.906,5.198 2.208,0.792 10 false : Cooperative control signal 0.698,4.094 2.74,4.865 2.042,0.771 10 false : Drive force control signal 0.688,3.771 1.656,4.063 0.969,0.292 10 false : Drive force 1.365,5.177 1.781,5.813 0.417,0.635 10 false Drive Force 2.031,5.646 2.948,5.844 0.917,0.198 10 false Time 1.396,6.229 2.646,6.833 1.25,0.604 10 false Converted into Drive Force Value 1.76,6.75 2.229,7.125 0.469,0.375 10 false ECM 0.104,6.323 0.938,7.26 0.833,0.938 10 false Accelerator Operation (Intended Acceleration) 1.042,7.24 2.521,7.792 1.479,0.552 10 true No. 2 Skid Control ECU 1.052,7.667 2.677,8.083 1.625,0.417 10 false Brake Control System 4.281,7.26 6.063,7.719 1.781,0.458 10 true Forward Recognition Camera 3.406,5.99 6.208,6.438 2.802,0.448 10 false Determination of Necessary Drive Force 3.156,6.385 4.677,6.802 1.521,0.417 10 false Powertrain Management 4,7.615 6.823,8.615 2.823,1 10 false Dynamic Radar Cruise Control System 5.271,2.813 6.594,3.5 1.323,0.688 10 false Transmission Control ECU Assembly


i.

Control Helping Improve Fuel Efficiency and Quietness

·

When the accelerator pedal opening angle is low, control is performed to reduce the engine speed as much as possible and use the highly efficient range of the engine, helping improve fuel efficiency and quietness.

X136938E07
2.573,2.25 3.406,2.792 3.406,2.792 3.875,2.792 true 2.802,2.781 3.323,3.417 3.323,3.417 3.74,3.417 true 0.49,0.333 1.573,0.604 1.083,0.271 10 false Engine Torque 2.594,0.677 4.052,0.948 1.458,0.271 10 false Fuel-efficient Range 5.281,0.927 6.74,1.281 1.458,0.354 10 false Optimal Fuel Efficiency Line 3.948,2.719 5.031,2.99 1.083,0.271 10 false AJA0F 3.813,3.354 6.406,3.729 2.594,0.375 10 false 8-speed Automatic Transmission 5.552,4.375 6.708,4.667 1.156,0.292 10 false Engine Speed



ii.

Drive Force Control Achieving Fuel Efficiency and Driveability

·

Motive force control provides the drive force of each shift position with a certain degree of freedom, achieving the motive force requested by the driver. In ranges where the accelerator pedal is only lightly depressed, the highly efficient range of the engine is proactively used to improve fuel efficiency performance. In addition, the difference in drive force between each gear position is minimized, achieving smooth shifting. On the other hand, in ranges where the accelerator pedal is heavily depressed, the motive force is generated according to changes in the engine speed, achieving a direct feeling of acceleration. As a result, fuel efficiency and driveability are achieved.

X136939E01
2.531,1.969 2.844,0.302 2.844,0.302 3.104,0.302 true 4.031,1 4.115,0.677 4.115,0.677 4.375,0.677 true 0.583,1.792 2.271,1.99 1.688,0.198 10 false Drive Force 0.438,3.979 2.125,4.177 1.688,0.198 10 false Engine Speed 1.427,5.354 3.115,5.552 1.688,0.198 10 false Open 2.979,5.344 5.771,5.656 2.792,0.313 10 false Accelerator Pedal Opening Angle 3.188,0.208 4.875,0.406 1.688,0.198 10 false Smooth Shifting 4.438,0.583 6.677,0.875 2.24,0.292 10 false Direct Feeling of Acceleration 2.219,4.896 2.521,5.104 0.302,0.208 10 false 8th 2.635,4.896 2.938,5.104 0.302,0.208 10 false 7th 2.99,4.896 3.292,5.104 0.302,0.208 10 false 6th 3.448,4.885 3.75,5.094 0.302,0.208 10 false 5th 4.042,4.896 4.344,5.104 0.302,0.208 10 false 4th 4.698,4.896 5,5.104 0.302,0.208 10 false 3rd 6.271,5.354 6.854,5.594 0.583,0.24 10 false Close




b.

Direct Connected Downshift Control

·

Direct connected downshift control is used to achieve linear engine speed changes during downshifting and smooth drive force changes that are linked with the engine speed.

·

A 10-speed automatic transmission has wider gear ratios than an 8-speed automatic transmission. Therefore, the amount of time it takes until acceleration is felt when shifting at the same speed as an 8-speed automatic transmission is greater, such as when depressing the accelerator pedal to downshift from a higher gear to a lower gear. Also, in order to reduce the amount of time it takes until acceleration is felt, control is used to perform shifting in order. However, during that time, each time shifting is performed, the input shaft speed stalls and the amount of time required to reach the target gear increases. Therefore, high-precision oil pressure control and highly responsive shift solenoid valves are used to prevent stalls from occurring and directly connect each gear change, achieving smooth and highly responsive downshifting.

Comparison of Same Shifting Speed
X136940E02
2.885,3.563 2.573,3 2.573,3 2.396,3 true 3.646,6.25 5.167,4.75 5.167,4.75 5.417,4.75 true 4.125,6.604 4.5,6.333 4.5,6.333 5.417,6.333 true 1.5,0.156 7.073,0.729 5.573,0.573 11 false : 10-speed automatic transmission (same shifting control as 8-speed automatic transmission) 1.5,0.729 3.875,1.25 2.375,0.521 11 false : 8-speed automatic transmission 0.313,1.979 1.49,2.438 1.177,0.458 11 false Shift Request 0.031,4.188 1.365,4.635 1.333,0.448 11 false Input Shaft Speed 0.427,5.51 1.604,5.969 1.177,0.458 11 false Drive Force 0.052,7.146 1.313,7.75 1.26,0.604 11 false Accelerator Pedal Opening Angle 1.385,2.885 2.396,3.385 1.01,0.5 11 false Same Shifting Speed 5.5,4.646 7.083,6.229 1.583,1.583 11 false Time until Acceleration Felt with 8-speed Automatic Transmission 5.5,6.229 7.083,7.729 1.583,1.5 11 false Time until Acceleration Felt with 10-speed Automatic Transmission 2.365,1.854 2.917,2.094 0.552,0.24 11 false 10th 2.365,2.135 2.917,2.375 0.552,0.24 11 false 8th 2.01,2.563 2.563,2.802 0.552,0.24 11 false 3rd 1.844,6.729 2.396,6.969 0.552,0.24 11 false Open 5.094,7.458 5.646,7.698 0.552,0.24 11 false Time

Comparison when Shifting in Order
X136941E06
4.594,4.25 5.073,3.688 5.073,3.688 5.302,3.688 true 3.052,3.677 2.938,2.979 true 3.563,3.281 2.948,2.979 2.948,2.979 2.604,2.979 true 3.865,5.417 4.375,5.073 4.375,5.073 4.604,5.073 true 1.5,0.167 6.792,0.521 5.292,0.354 11 false : 10-speed automatic transmission (control performed to shift in order) 1.5,0.729 6.896,1.188 5.396,0.458 11 false : 10-speed automatic transmission (same shifting control as 8-speed automatic transmission) 0.313,1.875 1.458,2.24 1.146,0.365 11 false Shift Request 0.031,4.302 1.354,4.667 1.323,0.365 11 false Input Shaft Speed 0.427,5.615 1.573,5.979 1.146,0.365 11 false Drive Force 0.042,7.177 1.302,7.563 1.26,0.385 11 false Accelerator Pedal Opening Angle 4.667,4.979 6.979,5.406 2.313,0.427 11 false Improved Feeling of Acceleration 5.333,3.583 6.938,4.219 1.604,0.635 11 false Delay until Final Target Gear Reached 1.344,2.885 2.594,3.354 1.25,0.469 11 false Input Shaft Speed Stall Occurs 2.354,1.854 2.958,2.115 0.604,0.26 11 false 10th 3.073,2.135 3.615,2.427 0.542,0.292 11 false 8th 3.74,2.333 4.125,2.604 0.385,0.271 11 false 5th 2.01,2.563 2.615,2.781 0.604,0.219 11 false 3rd 1.844,6.729 2.448,6.948 0.604,0.219 11 false Open 5.125,7.458 5.729,7.677 0.604,0.219 11 false Time

Comparison during Direct Connected Downshifting Control
X136942E02
3.042,3.688 2.948,2.979 false 3.573,3.302 2.948,2.979 2.948,2.979 2.51,2.979 false 4.615,5.083 4.25,5.083 4.25,5.083 3.865,5.417 true 1.5,0.167 6.635,0.875 5.135,0.708 10 false : 10-speed automatic transmission (direct connected downshifting control) 1.5,0.719 6.458,1.479 4.958,0.76 10 false : 10-speed automatic transmission (same shifting control as 8-speed automatic transmission) 0.406,1.896 1.281,2.25 0.875,0.354 10 false Shift Request 0.156,4.313 1.5,4.688 1.344,0.375 10 false Input Shaft Speed 0.542,5.625 1.417,5.979 0.875,0.354 10 false Drive Force 0.167,7.177 1.292,7.573 1.125,0.396 10 false Accelerator Pedal Opening Angle 1.865,6.74 2.74,7.094 0.875,0.354 10 false Open 5.135,7.469 6.01,7.823 0.875,0.354 10 false Time 4.667,4.979 6.823,5.479 2.156,0.5 10 false Improved Feeling of Acceleration 1.365,2.885 2.479,3.375 1.115,0.49 10 false Input Shaft Speed Stall Recovers 2.365,1.854 3.24,2.208 0.875,0.354 10 false 10th 3.083,2.135 3.958,2.49 0.875,0.354 10 false 8th 3.75,2.344 4.625,2.698 0.875,0.354 10 false 5th 2.031,2.573 2.906,2.927 0.875,0.354 10 false 3rd



c.

M Mode Control

·

M mode control is a control specification designed so that drivers can enjoy sporty driving. It emphasizes the direct feel of accelerator pedal operation and the responsiveness and feel of manual shifting.

·

Gear hold control is used to express a direct feeling.

·

High response upshift control and blipping downshift control are used to improve the responsiveness and feel of shifting gears.


i.

Gear Hold Control

·

The gear position is held to make it possible to make efficient use of the gear position at maximum engine speeds.

·

The system may automatically shift during M mode in the following situations.

Automatic shifting when the shift lever is in M
·

When the vehicle speed decreases below a specified speed, a downshift is performed.

·

When the ATF or engine coolant temperature is low, gear shifting will be performed automatically.





ii.

High Response Upshift Control

·

High response upshift control achieves highly responsive shifting. It does this by using the Driving Response and Acceleration Management System (DRAMS), which integrally controls the engine and transmission, and oil pressure control system, which directly controls the clutch pressure. The oil pressure control system performs quick and precise clutch engagement and release control. The Driving Response and Acceleration Management System (DRAMS) optimally controls the electronic throttle opening angle, ignition timing and fuel injection volume to command the engine torque to decrease. These controls are performed simultaneously to more precisely control engine speed changes when shifting, achieving quick shifting.

X106994E05
0.938,1.302 1.844,1.625 0.906,0.323 10 false Engine Speed 0.698,2.385 2.615,2.688 1.917,0.302 10 false High Response Upshift Control 0.833,2.823 2.625,3.146 1.792,0.323 10 false Conventional Upshift Control 5.115,2.01 5.49,2.323 0.375,0.313 10 false Time 5.125,1.667 5.479,1.99 0.354,0.323 10 false 3rd 5.125,1.063 5.635,1.385 0.51,0.323 10 false 2nd 2.781,0.688 3.896,0.958 1.115,0.271 10 false Upshift Operation 4.927,0.208 6.885,0.521 1.958,0.313 10 false : High response upshift control 4.927,0.563 6.76,0.885 1.833,0.323 10 false : Conventional upshift control 5.354,2.552 6.948,2.844 1.594,0.292 10 false : Gear shift initiation time 5.365,2.854 6.469,3.177 1.104,0.323 10 false : Gear shift time



iii.

Blipping Downshift Control

·

Blipping downshift control achieves quick shifting in the same manner as high response upshift control by using the oil pressure control system and Driving Response and Acceleration Management System (DRAMS).

·

The oil pressure control system is used to quickly release the clutch and create a neutral condition. Furthermore, the Driving Response and Acceleration Management System (DRAMS) is used to instantly increase the engine speed for synchronizing the engine speed near the gear position speed after shifting. Lastly, the direct oil pressure control system finishes shifting gears by smoothly and quickly engaging the clutch on the engagement side.

HINT:

When the ATF and engine coolant temperature is low, blipping downshift control will not be performed.


X106995E07
0.917,1.344 1.854,1.667 0.938,0.323 10 false Engine Speed 0.958,2.375 2.635,2.698 1.677,0.323 10 false Blipping Downshift Control 0.667,2.865 2.615,3.188 1.948,0.323 10 false Conventional Downshift Control 4.802,1.958 5.313,2.281 0.51,0.323 10 false Time 4.542,1.625 4.927,1.917 0.385,0.292 10 false 3rd 4.552,1.052 4.948,1.375 0.396,0.323 10 false 2nd 2.802,0.583 4.167,0.906 1.365,0.323 10 false Downshift Operation 4.948,0.219 6.708,0.5 1.76,0.281 10 false : Blipping downshift control 4.948,0.552 6.917,0.875 1.969,0.323 10 false : Conventional downshift control 5.385,2.521 6.958,2.844 1.573,0.323 10 false : Gear shift initiation time 5.396,2.875 6.448,3.219 1.052,0.344 10 false : Gear shift time




d.

Coast Downshift Control

·

Coast downshift control achieves low fuel consumption by performing fuel cut control as long as possible.

·

When decelerating, flex lock-up clutch control and downshift control are performed to suppress decreases in the engine speed. As a result, the engine speed does not fall below the fuel cut recovery speed, allowing fuel cut control to be performed as long as possible.

X110657E07
4.25,1.5 4.25,1.167 4.25,1.167 4.667,1.167 true 4.896,0.24 6.927,0.552 2.031,0.313 10 false : With Coast Downshift Control 4.906,0.646 7.073,0.958 2.167,0.313 10 false : Without Coast Downshift Control 0.417,2.75 1.885,3.063 1.469,0.313 10 false Fuel Cut Return Speed 0.948,0.969 1.906,1.229 0.958,0.26 10 false Engine Speed 0.802,3.823 1.927,4.146 1.125,0.323 10 false Fuel Cut Duration 4.75,1.083 6.844,1.406 2.094,0.323 10 false Coast Downshifts Occur Earlier 3.865,3.896 4.823,4.188 0.958,0.292 10 false Extended Time 6.01,3.354 6.375,3.615 0.365,0.26 10 false Time 2.031,2.417 2.354,2.698 0.323,0.281 10 false 8th 5.156,3.094 5.563,3.344 0.406,0.25 10 false to 5th 3.177,2.333 3.583,2.583 0.406,0.25 10 false to 7th 3.708,2.26 4.094,2.51 0.385,0.25 10 false to 6th 4.667,2.271 5.083,2.521 0.417,0.25 10 false to 5th 4.438,3.052 4.844,3.302 0.406,0.25 10 false to 6th 3.917,3.052 4.323,3.302 0.406,0.25 10 false to 7th



e.

Lock-up Timing Control

·

Lock-up timing control is performed across a wider range to achieve direct drive force transmission and improved fuel efficiency performance.

·

Lock-up timing control is performed when accelerating after decelerating and downshifting to achieve an extremely direct driving feel. In addition to using a torque converter, which uses a multi-plate lock-up clutch, the engine torque and oil pressure are optimally controlled to reduce shocks and improve responsiveness.

X149212E02
2.969,3.375 7.146,3.802 4.177,0.427 10 false Vehicle Speed 0.708,2.458 1.823,3.802 1.115,1.344 10 false Accelerator Pedal Opening Angle 2.979,1.719 4.25,2.229 1.271,0.51 10 true Lock-up Operating Range Expanded 4.302,3.365 7.156,3.802 2.854,0.438 10 false High 1.354,1.833 2.469,3.177 1.115,1.344 10 false Large 2.302,0.771 7.156,2.677 4.854,1.906 10 false : Lock-up Operating Range (AJA0F) 2.302,1.219 7.156,3.125 4.854,1.906 10 false : Lock-up Operating Range (8-speed Automatic Transmission)

Lock-up Timing Control Operation
X136966E01
0.385,0.792 0.844,0.99 0.458,0.198 10 false Gear 0.469,1.302 0.927,1.5 0.458,0.198 10 false 1st 0.458,1.698 0.917,1.896 0.458,0.198 10 false 2nd 0.469,2.104 0.927,2.302 0.458,0.198 10 false 3rd 0.458,2.5 0.917,2.698 0.458,0.198 10 false 4th 0.458,2.896 0.917,3.094 0.458,0.198 10 false 5th 0.458,3.292 0.917,3.49 0.458,0.198 10 false 6th 0.458,3.688 0.917,3.885 0.458,0.198 10 false 7th 0.458,4.083 0.917,4.281 0.458,0.198 10 false 8th 0.458,4.479 0.917,4.677 0.458,0.198 10 false 9th 0.427,4.875 0.885,5.073 0.458,0.198 10 false 10th 1.031,0.906 1.51,1.104 0.479,0.198 10 false D, D10 2.99,0.49 5.385,0.688 2.396,0.198 10 false Shift Position and Shift Range 1.833,0.906 2.292,1.104 0.458,0.198 10 false D9 2.51,0.906 2.969,1.104 0.458,0.198 10 false D8 3.177,0.917 3.635,1.115 0.458,0.198 10 false D7 3.854,0.906 4.313,1.104 0.458,0.198 10 false D6 4.531,0.906 4.99,1.104 0.458,0.198 10 false D5 5.198,0.906 5.656,1.104 0.458,0.198 10 false D4 5.875,0.906 6.333,1.104 0.458,0.198 10 false D3 6.552,0.906 7.01,1.104 0.458,0.198 10 false D2

○: Operates

X: Does not operate

-: Not applicable



i.

Responsiveness during acceleration is improved by suppressing revving up of the engine speed to achieve a direct driving feel.

X136944E06
4.229,3.198 3.135,2.927 3.135,2.927 2.875,2.927 true 4.177,5.01 5.073,4.594 5.073,4.594 5.365,4.594 true 4.219,0.51 5.292,0.708 1.073,0.198 10 false : AJA0F 4.219,0.927 6.688,1.406 2.469,0.479 10 false : 8-speed Automatic Transmission 0.177,1.906 1.292,2.313 1.115,0.406 10 false Accelerator Pedal Opening Angle 0.344,3.25 1.417,3.448 1.073,0.198 10 false Engine Speed 1.021,4.552 1.292,4.771 0.271,0.219 10 false G 1.635,2.844 2.875,3.302 1.24,0.458 10 false Suppressed Engine Speed Revving Up 5.427,4.51 7.073,4.854 1.646,0.344 10 false Improved Responsiveness 6.24,5.354 6.854,5.552 0.615,0.198 10 false Time



f.

Flex Lock-up Clutch Control

·

Fine-grained control of the drive force transmission distribution using a lock-up clutch (mechanical drive force transmission) and torque convertor (fluid drive force transmission) is performed according to driving conditions to dramatically improve the transmission efficiency.

·

Flex lock-up timing control uses innovative feedback control logic to achieve higher dimensions of system stability and responsiveness in response to a variety of characteristic changes, etc.

X153760E01
3.313,4.521 3.885,3.625 3.885,3.625 4.281,3.625 true 3.719,4.917 4.406,4.083 4.406,4.083 4.781,4.083 true 4.354,5.51 4.646,4.615 4.646,4.615 5.365,4.615 true 4.188,5.531 3.281,6.563 3.281,6.563 2.667,6.563 true 1.74,4.604 1.594,5.302 1.594,5.302 1.448,5.302 true 2.781,4.031 2.531,3.646 2.531,3.646 2.26,3.646 true 3.833,5.531 3.188,6.104 3.188,6.104 2.615,6.104 true 1.677,0.448 2.156,0.813 0.479,0.365 10 false ECM 3.26,1.125 4.167,1.531 0.906,0.406 10 false Engine Speed Signal 2.583,1.729 3.063,2.094 0.479,0.365 10 false Engine Speed 3.385,2.083 4.24,2.646 0.854,0.563 10 false Input Turbine Speed Signal 3.188,2.781 4.354,3.146 1.167,0.365 10 false Vehicle Speed 0.74,3.563 2.344,3.823 1.604,0.26 10 false Throttle Position Sensor 0.073,5.219 1.417,5.823 1.344,0.604 10 false E.F.I. Engine Coolant Temperature Sensor 4.354,3.542 6.333,3.813 1.979,0.271 10 false Crankshaft Position Sensor 4.854,4.01 6.375,4.417 1.521,0.406 10 false Transmission Revolution Sensor (NT) 5.438,4.542 6.552,4.917 1.115,0.375 10 false ATF Temperature Sensor 1.24,6.031 2.656,6.469 1.417,0.438 10 false Lock-up Relay Valve 1.083,6.49 2.823,7 1.74,0.51 10 false Shift Solenoid Valve SLU 4.656,6.521 6.156,6.875 1.5,0.354 10 false Linear Solenoid Signal 4.875,7.344 5.354,7.708 0.479,0.365 10 false Time 3.99,6.865 4.469,7.229 0.479,0.365 10 false Current 4.208,0.438 6.698,0.781 2.49,0.344 10 false Transmission Control ECU Assembly

Flex Lock-up Timing Control Operation (Acceleration)
X139067E01
3.01,0.51 4.958,0.823 1.948,0.313 10 false Shift Position and Shift Range 0.396,0.74 0.865,1.094 0.469,0.354 10 false Gear 0.417,1.333 0.667,1.667 0.25,0.333 10 false 1st 0.417,1.74 0.667,2.01 0.25,0.271 10 false 2nd 0.427,2.146 0.677,2.5 0.25,0.354 10 false 3rd 0.427,2.531 0.677,2.885 0.25,0.354 10 false 4th 0.427,2.927 0.677,3.26 0.25,0.333 10 false 5th 0.438,3.313 0.688,3.646 0.25,0.333 10 false 6th 0.438,3.708 0.698,4.073 0.26,0.365 10 false 7th 0.448,4.094 0.698,4.427 0.25,0.333 10 false 8th 0.438,4.49 0.677,4.76 0.24,0.271 10 false 9th 0.417,4.896 0.708,5.26 0.292,0.365 10 false 10th 1.01,0.896 1.5,1.156 0.49,0.26 10 false D, D10 1.823,0.885 2.25,1.24 0.427,0.354 10 false D9 2.479,0.885 2.906,1.24 0.427,0.354 10 false D8 3.156,0.885 3.583,1.24 0.427,0.354 10 false D7 3.823,0.885 4.25,1.24 0.427,0.354 10 false D6 4.51,0.896 4.938,1.25 0.427,0.354 10 false D5 5.177,0.896 5.604,1.25 0.427,0.354 10 false D4 5.844,0.896 6.271,1.25 0.427,0.354 10 false D3 6.521,0.906 6.771,1.24 0.25,0.333 10 false D2

○: Operates

X: Does not operate

-: Not applicable


Flex Lock-up Timing Control Operation (Deceleration)
X150085E01
2.979,0.51 5.229,0.729 2.25,0.219 10 false Shift Position and Shift Range 0.448,1.313 0.906,1.51 0.458,0.198 10 false 1st 0.438,1.708 0.896,1.906 0.458,0.198 10 false 2nd 0.448,2.104 0.906,2.302 0.458,0.198 10 false 3rd 0.438,2.5 0.896,2.698 0.458,0.198 10 false 4th 0.438,2.896 0.896,3.094 0.458,0.198 10 false 5th 0.438,3.292 0.896,3.49 0.458,0.198 10 false 6th 0.438,3.688 0.896,3.885 0.458,0.198 10 false 7th 0.438,4.083 0.896,4.281 0.458,0.198 10 false 8th 0.438,4.479 0.896,4.677 0.458,0.198 10 false 9th 0.396,4.875 0.854,5.073 0.458,0.198 10 false 10th 0.396,0.792 0.885,0.99 0.49,0.198 10 false Gear 1.208,0.906 1.698,1.104 0.49,0.198 10 false D, D10 2.219,0.906 2.708,1.104 0.49,0.198 10 false D9 3.104,0.906 3.594,1.104 0.49,0.198 10 false D8 3.969,0.906 4.458,1.104 0.49,0.198 10 false D7 4.854,0.906 5.344,1.104 0.49,0.198 10 false D6 5.729,0.906 6.219,1.104 0.49,0.198 10 false D5 6.563,0.906 7.052,1.104 0.49,0.198 10 false D4

○: Operates

X: Does not operate

-: Not applicable




g.

Drive Mode Select

·

This function automatically switches the powertrain control mode between the 3 types selectedby drive mode select operations: "NORMAL", "ECO" and "SPORT".*1

·

This function automatically switches the powertrain control mode between the 5 types selectedby drive mode select operations: "NORMAL", "ECO", "COMFORT","SPORT S" and "SPORT S+".*2

*1: Models without AVS

*2: Models with AVS

Drive Mode Powertrain Control Mode Outline
NORMAL Normal Ensures fuel economy and driveability when driving in the city, but when driving on winding roads, selects the optimal gear position to provide a more enjoyable driving experience.
ECO Eco Gradually adjusts the throttle characteristics to assist the driver with eco driving.
COMFORT*2 Normal Mainly uses the lower damping force range with the Adaptive Variable Suspension System (AVS) compared to NORMAL mode, performing control to achieve a comfortable ride.
SPORT*1 Power Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission and engine and also improving the steering feeling.
SPORT S*2 Power This mode is given the control characteristic of selecting a higher speed gear position than Normal mode. As a result, acceleration response and acceleration performance are improved and superior stability is ensured when driving around corners to provide a sportier driving feel when responsiveness and power are required, such as when driving on winding roads with many uphill slopes, downhill slopes and corners.
SPORT S+*2 Power Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission and engine, also improving the steering feeling and using the higher damping force range with AVS compared to NORMAL mode.

X150000C01
6.063,3.604 6.427,3.177 true 5.938,2.865 6.292,2.646 true 4.99,2.521 5.26,2.76 0.271,0.24 10 true *a 6.406,3.031 6.896,3.49 0.49,0.458 10 false *2 6.292,2.531 6.781,2.99 0.49,0.458 10 false *1
*1 DRIVE MODE Switch *2 MODE SELECT Switch
*a Drive Mode Select - -




h.

Off-road Driving Control

·

When the driver selects a mode suitable for the road surface with an MTS Switch operation, motive force control switches to the optimal control for the road surface. As a result, optimal driving performance is maintained, ensuring superior off-road driveability.

Transfer Multi-terrain Select Mode Driving Force Shift Schedule Gear Position
Low MUD Selects motive force characteristics for easy control of the slip amount Selects a Low position shift pattern 2nd
SAND
ROCK Selects motive force characteristics for easy control of walking speed in rocky areas 1st
High MUD Control that switches characteristics to ensure the optimal motive force according to each road surface when the accelerator pedal is operated Shift pattern that prevents the vehicle from becoming stuck in sand by suppressing upshifting when the accelerator is off 1st
SAND
DIRT
DEEP SNOW 2nd

X150001C01
5.969,3.688 6.313,4.01 true 6.073,3.146 6.396,3.375 true 6.313,4.021 6.604,4.26 0.292,0.24 10 true *1 6.406,3.375 6.719,3.635 0.313,0.26 10 false *2
*1 MTS Switch *2 MODE SELECT Switch




i.

Artificial Intelligence-shift Control (AI-shift Control)

·

AI-shift control, which automatically switches the shift pattern according to "road conditions" and the "driver's intentions", is used. AI-shift control is used in addition to the normal shift pattern, which takes into consideration the vehicle speed and the engine throttle opening angle as parameters to determine the shift position of the automatic transmission, achieving a higher dimension of comfortable driving.

HINT:

AI-shift control will be canceled when M mode is selected.


X106996E06
0.708,0.323 1.583,0.656 0.875,0.333 10 false Input Signals 0.656,0.781 1.573,1.115 0.917,0.333 10 false Sensor Signal 0.521,3.813 1.792,4.146 1.271,0.333 10 false Calculated by ECM 0.469,4.156 1.74,4.49 1.271,0.333 10 false Vehicle Acceleration 0.5,1.115 1.771,1.76 1.271,0.646 10 false - Accelerator Pedal Opening Angle 0.5,1.771 1.604,2.375 1.104,0.604 10 false - Throttle Opening Angle 0.5,2.5 1.771,2.833 1.271,0.333 10 false - Vehicle Speed 0.5,2.813 1.771,3.146 1.271,0.333 10 false - Engine Speed 0.5,3.156 1.771,3.49 1.271,0.333 10 false - Brake Signal 2.573,0.802 3.604,1.135 1.031,0.333 10 false AI-shift Control 2.719,1.167 3.844,1.5 1.125,0.333 10 false Road Condition 2.729,3.885 4.021,4.219 1.292,0.333 10 false Driver's Intention 2.5,4.333 3.781,4.667 1.281,0.333 10 false - Vehicle Condition 2.5,4.677 3.781,5.323 1.281,0.646 10 false - Accelerator Pedal Operation 2.5,5.323 3.865,5.969 1.365,0.646 10 false - Combination Switch Assembly Condition 2.906,1.594 4.396,1.927 1.49,0.333 10 false Uphill/Downhill Driving 3.365,1.969 4.667,2.302 1.302,0.333 10 false Estimating Grade 2.521,2.25 2.896,2.583 0.375,0.333 10 false Small 3.844,2.51 4.219,2.844 0.375,0.333 10 false Large 2.948,2.854 5.125,3.188 2.177,0.333 10 false : Criterion Acceleration 2.948,3.167 5.125,3.5 2.177,0.333 10 false : Actual Acceleration 4.219,5 5.396,5.75 1.177,0.75 10 false Estimating Driver's Intention 5.948,0.417 7.135,1.021 1.188,0.604 10 false Basic Shift Pattern Control 6,2.375 6.979,3 0.979,0.625 10 false Road Condition Support Control 6,5 7.031,5.875 1.031,0.875 10 false Driver's Intention Support Control


i.

Road Condition Support Control

·

Road condition support control judges whether the vehicle is traveling on an uphill or downhill slope according to information such as the throttle opening angle and vehicle speed. On uphill slopes, unnecessary upshifts are suppressed to constantly achieve the optimal amount of drive force, and on downhill slopes, downshifts are automatically performed to achieve the optimal engine brake force.

X100541E19
0.615,3.917 0.99,4.135 0.375,0.219 10 false 10th 0.625,3.417 0.948,3.625 0.323,0.208 10 false 10th 5.323,3.417 5.667,3.604 0.344,0.188 10 false 10th 5.49,3.917 5.844,4.115 0.354,0.198 10 false 10th 1.25,3.417 1.542,3.635 0.292,0.219 10 false 8th 2.417,3.417 2.667,3.625 0.25,0.208 10 false 9th 3.917,3.417 4.198,3.625 0.281,0.208 10 false 7th 5.198,3.917 5.5,4.135 0.302,0.219 10 false 8th 1.5,3.917 1.75,4.135 0.25,0.219 10 false 8th 2.833,3.417 3.063,3.667 0.229,0.25 10 false 8th 4.75,3.917 4.99,4.146 0.24,0.229 10 false 7th 3.083,3.917 3.354,4.115 0.271,0.198 10 false 7th 1.75,3.417 2.031,3.646 0.281,0.229 10 false 9th 4.667,1.229 5.802,1.604 1.135,0.375 10 false Brake Operating 4.25,3.917 4.521,4.146 0.271,0.229 10 false 6th 2.083,3.917 2.323,4.146 0.24,0.229 10 false 6th 2.083,3.417 2.333,3.646 0.25,0.229 10 false 6th 5.896,3.781 6.979,4.052 1.083,0.271 10 false With Control 5.875,3.281 7.125,3.563 1.25,0.281 10 false Without Control



ii.

Driver's Intention Support Control

·

Driver intention support control predicts the driver's intentions according to accelerator pedal operations and the vehicle condition and switches to a comfortable shift pattern that is appropriate for the driver without requiring any switch operations.


1.

Sudden Accelerator Pedal Release Control

-

When the accelerator pedal is released suddenly, this control makes it easier to hold the gear position, improving responsiveness when reaccelerating and the engine brake force.

X114000E06
3.5,3.75 3.594,2.927 3.594,2.927 3.896,2.927 false 2.583,0.656 2.25,0.167 2.25,0.167 1.917,0.167 true 5,1.167 4.833,0.167 4.833,0.167 4.5,0.167 true 4,2.802 7.01,3.458 3.01,0.656 10 true Improved Response while Holding in Low Gear in Preparation for Re-acceleration 0.083,2.083 0.833,2.698 0.75,0.615 10 true Accelerator Pedal 0.083,4.135 1.115,4.542 1.031,0.406 10 true Gear Position 0.104,5 1,5.365 0.896,0.365 10 true Engine Speed 0.917,1.917 1.625,2.229 0.708,0.313 10 true Operated 0.917,2.438 1.625,2.75 0.708,0.313 10 true Released 5.917,0.219 6.969,0.469 1.052,0.25 10 true : With Control 5.917,0.552 7.073,0.781 1.156,0.229 10 true : Without Control 1.25,3.885 1.583,4.083 0.333,0.198 10 true 8th 1.25,4.219 1.583,4.417 0.333,0.198 10 true 7th 1.25,4.552 1.583,4.75 0.333,0.198 10 true 6th 0.167,0.073 1.906,0.427 1.74,0.354 10 true Accelerator Pedal Released 2.75,0.073 4.49,0.427 1.74,0.354 10 true Accelerator Pedal Operated


2.

Downshifting Control during Hard Braking

-

High engine braking force and good re-acceleration response have been achieved by actively downshifting during deceleration when hard braking is made.

X113187E05
1.917,1.833 1.5,1.083 1.5,1.083 1.167,1.083 true 2.917,1.25 2.417,0.417 2.417,0.417 2.083,0.417 true 5,1.417 4.75,2.25 4.75,2.25 4.417,2.25 true 5.917,0.167 7.01,0.396 1.094,0.229 10 false : With Control 5.917,0.5 7.083,0.74 1.167,0.24 10 false : Without Control 0.073,2.771 1.021,3.156 0.948,0.385 10 false Brake Pedal 0.125,3.375 0.927,3.917 0.802,0.542 10 false Accelerator Pedal 1.24,2.583 1.813,2.792 0.573,0.208 10 false Operated 1.229,2.979 1.875,3.167 0.646,0.188 10 false Released 0.542,4.354 1.417,4.531 0.875,0.177 10 false Deceleration 1.5,4.021 1.813,4.219 0.313,0.198 10 false High 1.521,4.792 1.833,4.99 0.313,0.198 10 false Low 0.458,5.552 1.51,5.75 1.052,0.198 10 false Gear Position 1.5,5.115 1.958,5.313 0.458,0.198 10 false 8th 1.5,5.365 1.958,5.563 0.458,0.198 10 false 7th 1.5,5.594 1.958,5.792 0.458,0.198 10 false 6th 1.5,5.844 1.958,6.042 0.458,0.198 10 false 5th 1.5,6.083 1.958,6.281 0.458,0.198 10 false 4th 0.406,6.906 1.344,7.115 0.938,0.208 10 false Vehicle Speed 1.5,6.385 1.813,6.583 0.313,0.198 10 false High 1.5,7.417 1.813,7.615 0.313,0.198 10 false Low 1.229,3.281 1.802,3.49 0.573,0.208 10 false Operated 1.229,3.667 1.875,3.854 0.646,0.188 10 false Released 0.333,1 1.167,1.5 0.833,0.5 10 false Brake Pedal Operated 0.667,0.333 2.083,0.667 1.417,0.333 10 false Brake Pedal Released 2.646,2.167 4.385,2.396 1.74,0.229 10 true Accelerator Pedal Operated




iii.

Driver Intention/Driving Scene Support Control

·

Driver intention/driving scene support control selects the optimal gear position according to the driver's intentions and the driving scene at that point in time.

·

When the driver is driving in a relaxed manner, a high gear position is selected to emphasize fuel efficiency.

·

When the driver is driving in a sporty manner, a low gear position is selected to emphasize drive force and responsiveness.

·

Even if the driver has the D range selected while sporty driving is performed on winding roads and race tracks, shifting is performed using a shift pattern that makes it feel like gear positions are being selected manually, achieving a high-speed responsive drive.

HINT:

Driver intention/driving scene support control will be canceled when ECO mode is selected.


X136947E01
5.833,0.792 6.01,0.146 6.01,0.146 6.177,0.146 true 5.771,1.583 5.969,0.969 5.969,0.969 6.135,0.969 true 6.01,1.781 6.24,1.188 6.24,1.188 6.406,1.188 true 6.333,1.948 6.51,1.5 6.51,1.5 6.677,1.5 true 4.24,1.406 4.427,1.104 4.427,1.104 4.594,1.104 true 5.313,1.938 5.635,2.167 5.635,2.167 5.802,2.167 true 4.427,2.01 4.594,2.01 4.594,2.01 4.708,1.625 true 4.813,2.354 5,2.354 5,2.354 5.156,1.771 true 5.385,2.844 5.573,2.844 5.573,2.844 5.885,3.417 true 5.156,4.021 5.344,4.021 5.344,4.021 6.177,4.542 true 2.281,1.156 2.896,1.354 0.615,0.198 10 false 10th 2.354,1.396 2.969,1.594 0.615,0.198 10 false 8th 2.354,1.677 2.969,1.875 0.615,0.198 10 false 7th 2.354,2.031 2.969,2.229 0.615,0.198 10 false 6th 2.292,2.458 2.906,2.656 0.615,0.198 10 false 5th 0.219,3.771 0.833,3.969 0.615,0.198 10 false 6th 0.219,4.042 0.833,4.24 0.615,0.198 10 false 7th 0.219,4.24 0.833,4.438 0.615,0.198 10 false 8th 0.146,4.49 0.76,4.688 0.615,0.198 10 false 10th 0.833,4.177 1.448,4.375 0.615,0.198 10 false 10th 0.833,3.771 1.448,3.969 0.615,0.198 10 false 8th 1.083,3.229 1.698,3.427 0.615,0.198 10 false 7th 1.427,3.167 2.042,3.365 0.615,0.198 10 false 6th 1.688,3.156 2.302,3.354 0.615,0.198 10 false 7th 1.948,3.167 2.563,3.365 0.615,0.198 10 false 8th 2.24,3.167 2.854,3.365 0.615,0.198 10 false 7th 2.833,2.979 3.448,3.177 0.615,0.198 10 false 6th 3.01,2.375 3.625,2.573 0.615,0.198 10 false 5th 3.01,2.031 3.625,2.229 0.615,0.198 10 false 6th 3,1.677 3.615,1.875 0.615,0.198 10 false 7th 3,1.396 3.615,1.594 0.615,0.198 10 false 8th 3,1.167 3.615,1.365 0.615,0.198 10 false 10th 1.198,3.938 2.417,4.208 1.219,0.271 10 false Entering Corners 1.156,2.458 2.01,2.667 0.854,0.208 10 false Accelerating 0.156,2.823 0.771,3.021 0.615,0.198 10 false Cornering 1.083,0.813 2.771,1.063 1.688,0.25 10 false : Without control 1.083,0.396 2.781,0.677 1.698,0.281 10 false : With control 4.365,0.531 5.583,0.802 1.219,0.271 10 false Entering Corners 6.24,0.063 6.854,0.26 0.615,0.198 10 false Cornering 6.281,0.448 7.135,0.656 0.854,0.208 10 false Accelerating 4.646,1.01 5.26,1.208 0.615,0.198 10 false 10th 6.177,0.885 6.792,1.083 0.615,0.198 10 false 8th 6.448,1.094 7.063,1.292 0.615,0.198 10 false 7th 6.729,1.385 7.063,1.594 0.333,0.208 10 false 6th 4.573,2.26 5.188,2.458 0.615,0.198 10 false 7th 4.208,1.917 4.823,2.115 0.615,0.198 10 false 8th 5.875,2.083 7.01,2.719 1.135,0.635 10 true Low Gear Position Selected 4.135,2.76 5.458,2.979 1.323,0.219 10 false High Engine Speed 3.521,3.927 5.292,4.25 1.771,0.323 10 false Improved Responsiveness 3.521,3.354 3.969,3.875 0.448,0.521 10 false Engine Speed 6.635,4.938 6.969,5.146 0.333,0.208 10 false Time 6.635,3.948 6.969,4.156 0.333,0.208 10 false Time 6.635,2.771 6.969,2.979 0.333,0.208 10 false Time 2.969,4.729 4.031,5.271 1.063,0.542 10 false Acceleration and Deceleration G 3.24,1.729 4.094,2.323 0.854,0.594 10 false Gear Position





FAIL-SAFE


·

The fail-safe function minimizes the loss of operability when an abnormality occurs in a sensor or a solenoid valve.

·

For details, refer to the Repair Manual.



DIAGNOSIS


·

When the ECM detects a malfunction, it makes a diagnosis and memorizes the failed section. Furthermore, the ECM illuminates or blinks the MIL in the combination meter assembly to inform the driver.

·

The ECM will also store the Diagnostic Trouble Codes (DTCs) of the malfunctions.

·

The DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.

·

For details, refer to the Repair Manual.