FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Steering Sensor | Detects the steering direction and angle of the steering wheel assembly. | |
| Speed Sensor | Detects the wheel speed of each of the 4 wheels. | |
| Electric Power Steering Column Sub-assembly | Steering Torque Sensor | Detects the amount of twist of the torsion bar. Based on the torque applied to the torsion bar, the sensor creates an electrical signal, and sends this signal to the power steering ECU. |
| Reduction Mechanism | Reduces the speed of the power steering motor and transmits the rotation of the power steering motor to the rack shaft. | |
| Power Steering ECU with Motor Assembly | Power Steering Motor | Generates power assist in accordance with a signal received from the power steering ECU. |
| Rotation Angle Sensor | Sends the rotation angle of the power steering motor to the power steering ECU. | |
| Power Steering ECU | Operates the power steering motor to provide power assist based on the signals received from various sensors and ECUs. | |
| Brake Actuator Assembly | No. 2 Skid Control ECU |
·
Outputs the vehicle speed signal.
·
Requests steering torque assist during cooperative control. |
| Air Conditioning Amplifier Assembly | Receives a signal from the power steering ECU to limit electrical usage. | |
| Forward Recognition Camera | Sends steering assistance request signals to the power steering ECU. | |
| ECM | Outputs the engine speed. | |
| Combination Meter Assembly | Power Steering Warning Light (Amber Indicator) | Illuminates to alert the driver when the power steering ECU detects a malfunction in the power steering system with a steering actuator which limits the steering assist torque. |
| Integration Control and Panel Sub-assembly | DRIVE MODE Switch | Selects the drive mode. |
| MODE SELECT Switch | Switches the drive mode select. | |
SYSTEM CONTROL
The power steering ECU calculates the steering assist force based on steering torque information from the steering torque sensor, vehicle speed information from the No. 2 skid control ECU and information from each ECU and controls the power steering motor to generate the required steering assist torque.
The power steering system with a steering actuator consists of the control functions listed below:
| Control | Outline | |
|---|---|---|
|
*1: Models without AVS *2: Models with AVS |
||
| Steering Assist Control | Basic Control | Calculates the assist current required based on the steering torque value and the vehicle speed and operates the power steering motor. |
| Compensation Control | Compensates with a force, according to the driver's steering maneuver, improving the comfort of steering. | |
| Sport Mode Control | When drive mode SPORT*1 or SPORT S+*2 is selected, the power steering ECU switches to assist characteristics with higher steering responsiveness than Normal mode to achieve a more direct steering feeling. | |
| Brake Control System Cooperative Control | Receives requests from the No. 2 Skid Control ECU assembly and performs steering assist control in accordance with the operating condition of the brake control system. This facilitates the steering operation of the driver, achieving a high level of vehicle stability. | |
| Driving Assistance System Request Control | The power steering ECU operates the steering wheel and provides steering assistance using various driving assistance systems. For details, see each driving assistance system section. | |
| Power Supply Voltage Drop Control | When the power steering ECU detects a power supply voltage drop, it sends a load control demand to the air conditioning amplifier assembly in order to limit electrical usage. | |
FAIL-SAFE
If the power steering ECU detects a malfunction in the power steering system, the power steering ECU illuminates the power steering warning light (amber indicator*).
*: Illuminates when a malfunction.
If a system malfunction occurs, the power steering ECU changes the control mode to fail-safe mode. For details, refer to the Repair Manual.
DIAGNOSIS
The power steering ECU will also store a Diagnostic Trouble Code (DTC). The DTC can be accessed through the use of the Global TechStream (GTS). For details, refer to the Repair Manual.