CONSTRUCTION
A low inertia, low noise, and high power output brushless type power steering motor is used.
The power steering motor consists of a rotor, stator, motor shaft and rotation angle sensor.
The rotation angle sensor consists of a highly reliable and durable resolver sensor. The rotation angle sensor detects the rotation angle of the motor and outputs it to the power steering ECU assembly.
The torque that is generated by the power steering motor assembly is transmitted via the joint to the reduction mechanism.
The wheel gear is made of a high strength, low friction, and low wear plastic material to realize low noise and a lightweight construction.
The worm gear is supported by ball bearings in order to reduce noise and friction.
| *1 | Ball Bearing | *2 | Worm Gear |
| *3 | Column Shaft | *4 | Wheel Gear |
| *5 | Motor Shaft | *6 | Stator |
| *7 | Power Steering ECU | *8 | Rotation Angle Sensor |
| *9 | Rotor | - | - |