Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM38G0E _55 Steering _102531 POWER ASSIST SYSTEMS _0474225 POWER STEERING SYSTEM GE GENERAL F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Power steering with a steer actuator is used to ensure a superior steering feeling.*1


b.

Generates assist torque using a power steering motor and a reduction mechanism mounted on the steering column assembly to assist the driver's steering operation.*1


c.

Electric load control is used. This control prevents the assist torque from rapidly decreasing when the battery voltage decreases.*1


d.

A rack and pinion type steering gear is used.


e.

A hydraulic power steering is used.


f.

A Variable Flow Control (VFC) power steering is used.*2

*1: Models with power tilt and power telescopic system

*2: Models with VFC power steering




MAIN FEATURES


a.

Power Steering with a Steer Actuator

i.

Vehicle Speed Sensing Function

ยท

The assist characteristics are changed according to speed sensor signals, achieving a light steering feeling at low speeds and a moderately responsive steering feeling at high speeds.




b.

Variable Flow Control (VFC) Power Steering

i.

The VFC power steering is provided with a solenoid valve, which is controlled by the power steering ECU, in the vane pump.


ii.

The solenoid valve controls the discharge flow rate of the power steering fluid in accordance with the operating conditions of the steering wheel (steering angle and steering speed), vehicle speed, engine speed and transfer drive mode. Thus, the solenoid valve reduces the load on the engine applied by the actuation of the vane pump, and improves fuel economy.