FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Steering Wheel Assembly | Thermostat | Stops current flow in the heater wire when the steering wheel assembly surface temperature exceeds a threshold. |
| Heater Wire | Increases the steering wheel assembly surface temperature using power supplied by the multiplex network steering ECU assembly. | |
| Thermistor | Sends a steering wheel assembly surface temperature signal to the multiplex network steering ECU. | |
| Multiplex Network Steering ECU | Performs heated steering wheel control according to signals from the air conditioning amplifier assembly and thermistor. | |
| Air Conditioning Control Assembly | Steering Heater Switch
·
Indicator Light |
·
Sends signals from the steering heater switch to the air conditioning amplifier assembly.
·
Illuminates when the heated steering wheel system is on. |
| Air Conditioning Amplifier Assembly | Sets the target temperature of the heater wire according to the target outlet temperature and outputs a heated steering wheel control request signal to the multiplex network steering ECU. | |
| Integration Control Sub-assembly | Outputs information that was set on the display screen of the multi-display to the air conditioning amplifier assembly. | |
| Multi-display Assembly | Used to set the control mode on the display screen.
·
Switches AUTO mode on and off.
·
Sends signals from the steering heater switch to the integration control sub-assembly. |
|
SYSTEM CONTROL
MANUAL Mode
When the steering heater switch is turned on with the ignition switch is ON, current flows to the heater element inside the steering wheel assembly, and the heater element is heated. As a result, the heating area of the steering wheel assembly is heated. In addition, the indicator light in the steering heater switch turns on to notify the driver that the steering wheel heater system is in operation.
The steering wheel heater system detects the heater wire temperature from the thermistor* inside the steering wheel assembly, controls the amount of current to the heater element, and maintains the heater portion at 40°C for the steering wheel assembly.
*: An element that uses a semiconductor whose electrical resistance changes significantly in response to slight changes in temperature (the resistance is high at normal temperatures, but it decreases as the temperature increases).
When the heater wire temperature increases to approximately 55°C or higher, the thermostat* stops supplying electric current to the heater wire. When the heater wire temperature increases to approximately 30°C, the thermostat starts supplying electric current again.
*: This is a temperature adjustment device which automatically controls a heat source by using a switch based on bimetal and shape-memory alloy.
AUTO Mode
When the ignition switch is ON, the air conditioning amplifier assembly automatically determines the heated steering wheel system operation according to the target outlet temperature of the air conditioning system. The air conditioning amplifier assembly determines the target temperature of the heater wire according to the target outlet temperature and controls the supply of electric current to the heater wire in the smultiplex network steering ECU to maintain the target temperature.
FAIL-SAFE
When a system malfunction occurs, the multiplex network steering ECU assembly stops the supply of electric current to the heater wire to ensure safety in accordance with the fail-safe function. For details, refer to the Repair Manual.