CONSTRUCTION
A shift control mechanism with a push-pull type transmission cable assembly is used.
A straight type shift lever, which is installed on the instrument panel, is provided. Additionally, a transmission control switch, which allows a desired shift range to be selected by moving the shift lever toward "+" (upshift) or "-" (downshift), is provided, enabling the driver to select shift ranges with a manual-like feel.
A shift lock release button is provided inside the shift lever housing in consideration of emergency situations.
| *1 | Shift Lever Knob Sub-assembly | *2 | Shift Lever Knob button |
| *3 | Shift Lock Control Unit Assembly | *4 | Transmission Control Cable Assembly |
| *5 | Shift Lock Release Button Cover | - | - |
| *a | Shift Pattern | - | - |
The shift lever used is a 5-position (P, R, N, D and M) straight type lever. Along with the change to a straight-type lever, a detent mechanism using knob button operation was added to prevent accidentally shifting from P→R, R→P, or N→R.
| *1 | Shift Lever Knob button | *2 | Detent Rod |
| *3 | Shift Lock Control Unit Assembly | *4 | Detent |
| *5 | Detent Plate | *6 | Shift Lever Knob Sub-assembly |
|
Shift Lever Knob Button Operation Necessary |
|
Shift Lever Knob Button Operation Not Necessary |