OPERATION
Welcome Message Display
A welcome message showing the name of the identified driver is displayed when the ignition switch is turned to ON.
The "Driver Change" button displayed in the welcome message can be selected to switch to another driver.
Initial Key Assignment Display
"New Key Detected" will be displayed on the multi-information display if an unregistered electrical key is brought into the vehicle.
Select "Yes" to switch to the driver assignment and registration screen.
Select "No" to display the normal multi-information display without switching to the driver assignment and registration screen.
Select "Do Not Show Again" to prevent the system from displaying the initial key assignment message whenever an unregistered electrical key is brought into the vehicle.
Setting Display
The following settings can be set.
| Item | Outline |
|---|---|
| Driver Change | Used to switch to another driver if the incorrect driver was identified. |
| Key Assignment | Registers or deletes electrical key assignments and registrations. |
| Driver Name Change | Changes the driver name. Up to 10 characters can be entered. |
| Driver Information Initialization | Initializes driver information. |