Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM
NM38G0E _51 Engine / Hybrid System _102382 1GR-FE ENGINE CONTROL _0476999 SFI SYSTEM CO CONTROL F

1GR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  ELECTRONIC THROTTLE CONTROL SYSTEM-intelligent (ETCS-i) CONTROL  


FUNCTION


a.

The Electronic Throttle Control System-intelligent (ETCS-i) is used, providing excellent throttle control in all the operating ranges. An accelerator pedal position sensor has been provided on the accelerator pedal.


b.

The ETCS-i uses the ECM to calculate the optimal throttle valve opening that is appropriate for the respective driving conditions and uses a throttle control motor to control the opening.


c.

The ETCS-i controls the Idle Speed Control (ISC) system.


d.

In case of an abnormal condition, this system transfers to the fail-safe mode.

W133246E02
1.094,0.271 2.417,0.677 1.323,0.406 10 false Mass Air Flow Meter Sub-assembly 1.177,1.271 2.281,1.635 1.104,0.365 10 false Accelerator Pedal Position Sensor 1.01,2.385 2.594,2.781 1.583,0.396 10 false Crank Position Sensor 1.063,3.438 2.5,3.875 1.438,0.438 10 false Pattern Select Switch (2nd) 1.115,4.531 2.406,4.958 1.292,0.427 10 false Cruise Control Main Switch* 1.323,5.615 2.302,5.854 0.979,0.24 10 false VVT Sensor 1.083,6.375 2.417,6.813 1.333,0.438 10 false E.F.I. Engine Coolant Temperature Sensor 3.302,3.51 3.854,3.792 0.552,0.281 10 false ECM 4.896,2.406 5.917,2.844 1.021,0.438 10 false Throttle Control Motor 4.917,3.167 6.031,3.594 1.115,0.427 10 false Throttle Position Sensor 4.688,5.104 6.167,5.396 1.479,0.292 10 false Ignition Coil Assembly 4.656,6.677 6.125,6.948 1.469,0.271 10 false Fuel Injector Assembly 0.073,7.5 4.844,7.833 4.771,0.333 10 false *: Models with dynamic radar cruise control system or cruise control system 4.542,1.292 6.177,1.688 1.635,0.396 10 false Throttle Body with Throttle position Sensor Assembly


e.

The ECM drives the throttle control motor by determining the target throttle valve opening in accordance with the respective operating conditions.


f.

The ECM controls the throttle to an optimal throttle valve opening that is appropriate for the driving conditions, such as the amount of accelerator pedal effort and the engine speed, in order to achieve excellent throttle control and comfort in all operating ranges.

Control Examples during Acceleration and Deceleration
W102921E06
5.781,0.115 6.75,0.5 0.969,0.385 10 false : With control 5.792,0.49 6.938,0.927 1.146,0.438 10 false : Without control 0.802,0.823 2.333,1.208 1.531,0.385 10 false Vehicle's Longitudinal G 0.521,1.979 2.375,2.323 1.854,0.344 10 false Throttle Valve Opening Angle 0.125,2.885 2.365,3.302 2.24,0.417 10 false Accelerator Pedal Depression Angle 5.333,3.438 5.781,3.74 0.448,0.302 10 false Time


g.

2nd Start Control

In situations in which low-μ (low friction) road surface conditions can be anticipated, such as when driving in the snow, the rate of throttle valve opening can be controlled to help vehicle stability while driving on the slippery surface. This is accomplished by turning on 2nd start control. Pressing the 2nd side of the pattern select switch activates this control. This control modifies the relationship and reaction of the throttle to the accelerator pedal, and assists the driver by reducing the engine output from that of a normal level.



h.

Idle Speed Control

The ECM controls the throttle valve in order to constantly maintain an ideal idle speed.



i.

Cruise Control (models with dynamic radar cruise control system or cruise control system)

The ECM directly actuates the throttle valve for operation of the cruise control.