FUNCTION
The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 40° and 35° respectively (of crankshaft angle) to provide valve timing optimally suited to the engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy, and reducing exhaust emissions.
| *1 | Camshaft Timing Oil Control Valve (Bank 2, Exhaust) | *2 | Camshaft Timing Oil Control Valve (Bank 2, Intake) |
| *3 | VVT Sensor (Bank 2, Exhaust) | *4 | VVT Sensor (Bank 2, Intake) |
| *5 | VVT Sensor (Bank 1, Exhaust) | *6 | VVT Sensor (Bank 1, Intake) |
| *7 | Crank Position Sensor | *8 | ECM |
| *9 | Camshaft Timing Oil Control Valve (Bank 1, Exhaust) | *10 | Camshaft Timing Oil Control Valve (Bank 1, Intake) |
| *11 | E.F.I. Engine Coolant Temperature Sensor | *12 | Mass Air Flow Meter Sub-assembly |
| *13 | Throttle Position Sensor | *14 | Vehicle Speed Signal |
By using the engine speed, intake air mass, throttle position and engine coolant temperature, the ECM calculates the optimal valve timing for each driving condition and controls the camshaft timing oil control valve. In addition, the ECM uses signals from the intake and exhaust VVT sensors for each bank and the crank position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.
The VVT-i system delivers excellent benefits in the different operating conditions as follows:
| Condition | Operation | Objective | Effect |
|---|---|---|---|
| During Idling |
1.573,1.875 1.99,2.094 0.417,0.219 10 false BDC 1.573,0.104 1.99,0.323 0.417,0.219 10 false TDC 2.406,1.01 2.823,1.229 0.417,0.219 10 false IN 0.865,0.979 1.281,1.198 0.417,0.219 10 false EX 2.208,0.104 3.094,0.521 0.885,0.417 10 false Latest Timing (IN) 0.396,0.125 1.313,0.458 0.917,0.333 10 false Earliest Timing (EX)
|
Eliminating overlap to reduce blow back to the intake side. |
·
Stabilized idle speed
·
Better fuel economy |
| At Light Load |
2.49,1.063 2.885,1.281 0.396,0.219 10 false IN 0.875,1.063 1.188,1.26 0.313,0.198 10 false EX 2.333,0.417 3.26,0.813 0.927,0.396 10 false To Retard Side (IN) 0.229,0.438 1.292,0.813 1.063,0.375 10 false To Advance Side (EX)
|
Eliminating overlap to reduce blowback to the intake side. | Ensured engine stability |
| At Medium Load |
0.76,1.073 1.073,1.271 0.313,0.198 10 false EX 2.344,1.125 2.656,1.323 0.313,0.198 10 false IN 0.167,0.135 1.229,0.583 1.063,0.448 10 false To Advance Side (IN) 2.167,0.177 3.115,0.656 0.948,0.479 10 false To Retard Side (EX)
|
Increasing overlap increases internal EGR, reducing pumping loss. |
·
Better fuel economy
·
Improved emission control |
| In Low to Medium Speed Range with Heavy Load |
0.188,1.458 1.104,1.906 0.917,0.448 10 false To Retard Side (EX) 2.229,1.458 3.313,1.875 1.083,0.417 10 false To Advance Side (IN) 2.365,1.052 2.677,1.25 0.313,0.198 10 false IN 0.74,1.01 1.052,1.208 0.313,0.198 10 false EX
|
Advancing the intake valve closing timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
| In High Speed Range with Heavy Load |
0.052,1.438 0.99,1.917 0.938,0.479 10 false To Retard Side (IN) 2.281,1.521 3.313,1.979 1.031,0.458 10 false To Advance Side (EX) 0.74,0.958 1.229,1.26 0.49,0.302 10 false EX 2.344,0.99 2.656,1.302 0.313,0.313 10 false IN
|
Retarding the intake valve closing timing for volumetric efficiency improvement. | Improved output |
| At Low Temperatures |
0.813,1.031 1.125,1.229 0.313,0.198 10 false EX 2.417,1.031 2.729,1.229 0.313,0.198 10 false IN 0.25,0.333 1.219,0.823 0.969,0.49 10 false Earliest Timing (EX) 2.208,0.333 3.313,0.76 1.104,0.427 10 false Latest Timing (IN)
|
Eliminating overlap to reduce blowback to the intake side. |
·
Stabilized fast idle speed
·
Better fuel economy |
|
·
Upon Starting
·
Stopping the Engine |
0.813,1.031 1.125,1.229 0.313,0.198 10 false EX 2.417,1.031 2.729,1.229 0.313,0.198 10 false IN 0.25,0.333 1.219,0.823 0.969,0.49 10 false Earliest Timing (EX) 2.208,0.333 3.313,0.76 1.104,0.427 10 false Latest Timing (IN)
|
Eliminating overlap to minimize blowback to the intake side. | Improved startability |