CONSTRUCTION
The camshaft timing gear assembly consists of an outer housing that is driven by the timing chain sprocket, and a vane sub-assembly that is coupled to each camshaft.
The intake side uses a camshaft timing gear assembly with 3 vanes, and the exhaust side uses one with 4 vanes.
When the engine stops, the camshaft timing gear assembly (intake) is locked at the most retarded angle by its lock pin, and the camshaft timing gear assembly (exhaust) is locked at the most advanced angle. This ensures excellent engine startability.
The oil pressure sent from the advance or retard side passages of the intake and exhaust camshafts causes rotation of the vane sub-assembly relative to the timing chain sprocket, to vary the valve timing continuously.
An advance assist spring is provided on the camshaft timing gear assembly (exhaust). This helps to apply torque in the advanced angle direction so that the vane lock pin securely engages with the housing when the engine stops.
| *1 | Timing Rotor | *2 | Outer Housing |
| *3 | Vane Sub-assembly (Coupled to Intake Camshaft) | *4 | Timing Chain Sprocket |
| *5 | Intake Camshaft | *6 | Lock Pin |
| *a | Oil Pressure | *b | In Operating |
| *c | At a Stop | - | - |
| *1 | Outer Housing | *2 | Lock Pin |
| *3 | Timing Chain Sprocket | *4 | Exhaust Camshaft |
| *5 | Vane Sub-assembly (Coupled on Exhaust Camshaft) | *6 | Advanced Assist Spring |
OPERATION
Advance
When the camshaft timing oil control valve is positioned as illustrated below by the advance signals from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction.
| *1 | Vane Sub-assembly | *2 | ECM |
| *3 | Camshaft Timing Oil Control Valve (Intake) | - | - |
| *a | Rotation Direction | *b | Oil Pressure |
| *c | In | *d | Drain |
| *1 | Vane Sub-assembly | *2 | ECM |
| *3 | Camshaft Timing Oil Control Valve (Exhaust) | - | - |
| *a | Rotation Direction | *b | Drain |
| *c | In | *d | Oil Pressure |
Retard
When the camshaft timing oil control valve is positioned as illustrated below by the retard signals from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction.
| *1 | Vane Sub-assembly | *2 | ECM |
| *3 | Camshaft Timing Oil Control Valve (Intake) | - | - |
| *a | Rotation Direction | *b | Drain |
| *c | In | *d | Oil Pressure |
| *1 | Vane Sub-assembly | *2 | ECM |
| *3 | Camshaft Timing Oil Control Valve (Exhaust) | - | - |
| *a | Rotation Direction | *b | Oil Pressure |
| *c | In | *d | Drain |
Hold
After reaching the target timing, the engine valve timing is maintained by keeping the camshaft timing oil control valve in the neutral position unless the engine operating conditions change.
This maintains the engine valve timing at the desired target position by preventing the engine oil from running out of the oil control valve.