CONSTRUCTION
The pistons are made of aluminum alloy.
The piston shape has been optimized for a high compression ratio.
The piston head portion uses a taper squish shape to accomplish fuel combustion efficiency.
In order to reduce weight, cast holes have been provided on the bottom of the piston head near the pin bosses as shown in the illustration below.
The piston skirt has been coated with resin to reduce the friction loss.
The groove of the top ring has been coated with anodic oxide to improve wear resistance and rust resistance.
This piston is common to all cylinders. Therefore, the pistons are not shaped especially for the right or the left bank. As a result, serviceability has been improved.
The outer surface of the No. 2 compression ring has been plated with chrome in order to be compatible with gasoline/ethanol mixed fuel.
| *a | Taper Squish Shape | *b | Resin Coating |
| *c | Anodic Oxide Coating | *d | Weight Reduction Area |