CONSTRUCTION
The intake camshafts are driven by the crankshaft via the No. 1 chain. The intake camshaft of the respective bank drives the exhaust camshafts via the No. 2 chain.
A Dual Variable Valve Timing-intelligent (VVT-i) system is used. As a result, the valve timing has been optimized, achieving lower fuel consumption, higher engine performance and lower exhaust emissions.
A valve rocker arm sub-assemblies with built-in needle bearings are used. This reduces the friction that occurs between the cams and the valve rocker arm sub-assemblies that push the valves down, thus improving fuel economy.
Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.
| *1 | Camshaft Timing Gear Assembly (Exhaust) | *2 | Camshaft Timing Gear Assembly (Intake) |
| *3 | Exhaust Camshaft | *4 | Intake Camshaft |
| *5 | No. 1 Chain | *6 | No. 2 Chain |
| *7 | Valve Rocker Arm Sub-assembly | *8 | Valve Spring Retainer |
| *9 | Valve | *10 | Valve Spring Seat |
| *11 | Valve Guide Bush | *12 | Compression Spring |
| *13 | Valve Lash Adjuster Assembly | - | - |