CONSTRUCTION
The camshafts are made of a cast iron alloy.
A camshaft timing gear assembly has been added at the front end of the exhaust camshafts to vary the timing of the exhaust valves.
Oil passages are provided on the intake and exhaust camshafts in order to supply engine oil to the VVT-i system.
Together with the use of the valve rocker arm sub-assemblies, the cam profile has been optimized. This results in increased valve lift when the valve begins to open and as it finishes closing, helping to achieve enhanced output performance.
| *1 | No. 1 Camshaft (Intake) | *2 | No. 2 Camshaft (Exhaust) |
| *3 | No. 3 Camshaft (Intake) | *4 | No. 4 Camshaft (Exhaust) |
| *5 | Camshaft Timing Gear Assembly (Intake) | *6 | Camshaft Timing Gear Assembly (Exhaust) |
| *7 | Timing Rotor for VVT Sensor (Intake) | *8 | Timing Rotor for VVT Sensor (Exhaust) |
| *a | Cam with Indented R | *b | Indented R Portion of Cam (Profile) |
| *c | Cross Section of End of Intake Camshaft | *d | Oil Passage |