CONSTRUCTION
The crankshaft bearings are made of aluminum alloy.
Similar to the connecting rod bearings, the lining surface of the crankshaft bearings has been micro-grooved to realize an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.
The upper crankshaft bearing has an oil groove around its inside circumference.
The crankshaft bearing caps are tightened using 4 plastic-region tightening bolts for each journal. In addition, each cap is tightened laterally to improve its reliability.
| *1 | Plastic Region Tightening Bolt | *2 | Crankshaft Bearing Cap |
| *3 | Seal Washer | *4 | Upper Crankshaft Bearing |
| *5 | Lower Crankshaft Bearing | - | - |
| *a | Oil Grooved | *b | Micro-Grooved |