CONSTRUCTION
Both the No. 1 and No. 2 chains use roller chains with a pitch of 9.525mm (0.375 in.).
The timing chain is lubricated by timing chain oil jet.
The No. 1 chain uses one timing chain tensioner and each of the No. 2 chains for the right and left banks uses one timing chain tensioner.
The chain tensioners use a spring and oil pressure to maintain proper chain tension at all times. They suppress noise generated by the timing chains.
The No. 1 chain tensioner is the ratchet type with a non-return mechanism.
| *1 | No. 1 Chain | *2 | No. 2 Chain |
| *3 | No. 1 Chain Tensioner | *4 | No. 2 Chain Tensioner |
| *5 | No. 3 Chain Tensioner | *6 | No. 1 Chain Vibration Damper |
| *7 | No. 2 Chain Vibration Damper | *8 | No. 1 Idle Gear |
| *9 | Chain Tensioner Slipper | *10 | Timing Chain Oil Jet |
| *11 | Ball | *12 | Ball Spring |
| *13 | Main Spring | *14 | Plunger |
| *15 | Spring | *16 | Cam |
| *17 | Cam Spring | - | - |