CONSTRUCTION
The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.
The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.
No. 1 Interior Illumination Light Assembly LH
No. 1 Interior Illumination Light Assembly RH
Illumination Light Assembly LH
Illumination Light Assembly RH
Vanity Light Assembly LH
Vanity Light Assembly RH
Meter Mirror Sub-assembly
Air Conditioning Control Assembly
Front Door Inside Handle Illumination Light Assembly LH
Front Door Inside Handle Illumination Light Assembly RH
Multi-display Assembly
Navigation ECU Assembly
Integration Control Sub-assembly
Integration Control Assembly
Radio Receiver Assembly
Clearance Warning ECU Assembly
Electrical Key and Tire Pressure Monitoring System Receiver Assembly
Millimeter Wave Radar Sensor Assembly
Brake Booster Control ECU
Skid Control ECU
Combination Meter Assembly
Varies depending on the vehicle specification.
An external backup boost converter (eco run vehicle converter assembly) is used.
When the audio system is used during idle stop, the external backup boost converter (eco run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.