Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › SFI SYSTEM
NM38G0E _51 Engine / Hybrid System _101627 V35A-FTS ENGINE CONTROL _0478156 SFI SYSTEM CO CONTROL F

V35A-FTS ENGINE CONTROL  SFI SYSTEM  CONTROL  DRIVE START CONTROL  


FUNCTION


a.

When abnormal driver accelerator pedal and shift operations are detected, the system restricts the engine output and informs the driver.

W148536E03
0.229,0.76 2.552,1.031 2.323,0.271 10 false Accelerator Pedal Sensor Assembly 0.49,1.406 2.281,1.906 1.792,0.5 10 false Park/Neutral Position Switch Assembly 0.677,2.198 2.438,2.563 1.76,0.365 10 false Brake Actuator Assembly 0.771,2.74 2.333,2.958 1.563,0.219 10 false No. 2 Skid Control ECU 5.646,2.76 6.865,3.531 1.219,0.771 10 false Combination Meter Assembly 5.385,1.313 7.094,2.406 1.708,1.094 10 false Engine Output Request 3.927,2.656 4.427,3 0.5,0.344 10 false ECM 5.521,3.979 6.979,4.781 1.458,0.802 10 false Headup Display (Meter Mirror Sub-assembly)* 0.115,5.302 5.021,5.552 4.906,0.25 10 false *: Models with headup display (meter mirror sub-assembly)

HINT:
·

When the VSC OFF switch is operated to turn the TRC OFF mode, the system does not operate.

·

When 4WD is L4 position by 4WD switch, the drive start control does not operate.

·

When Center Differential Lock Mechanism is locked by Center Differential Lock switch, the drive start control does not operate.

·

When Multi-terrain Select is selected, the drive start control does not operate

·

When the system is operating, even if the driver depresses and holds the accelerator pedal, engine output may increase on an uphill slope and decrease on a downhill slope. This behavior allows the system to restrict the vehicle speed and acceleration below the predetermined limit on slopes and is not a malfunction.




b.

Control during Shift Operation

i.

Responds to shift operations with the accelerator pedal depressed.


ii.

Changes the limit amount according to the shift operation pattern.


iii.

Corrects engine output according to the road grade.

1.

Control when Starting Off from a Parked Position

*: Operation may not be possible in certain situations.

Control Start Conditions (When all of the following conditions are met, control starts.)
·

Accelerator opening angle is approximately 1/5 or higher.

·

Shift position is changed from P to D/M, or P to R.*


Control Operation Restricts the engine output so the vehicle speed and acceleration are at or below a certain level.
Control Stop Conditions
·

Accelerator pedal is fully released.

·

Shift position is P or N.



W110518E36
3.615,0.927 3.792,0.771 3.792,0.771 3.99,0.771 true 5.021,1.427 5.146,1.219 5.146,1.219 5.396,1.219 true 5.021,2.323 5.146,2.115 5.146,2.115 5.396,2.115 true 1.563,0.208 2.51,0.542 0.948,0.333 10 false Shift Position 1.354,0.573 2.552,0.948 1.198,0.375 10 false Accelerator Pedal 2.844,0.229 3.073,0.458 0.229,0.229 10 false P 3.406,0.229 3.635,0.458 0.229,0.229 10 false D 2.781,0.573 3.104,0.823 0.323,0.25 10 false ON 4.042,0.698 4.896,1.01 0.854,0.313 10 false Control Start 1.646,1.604 2.563,1.969 0.917,0.365 10 false Engine Output 3.823,2.469 4.229,2.677 0.406,0.208 10 false Time 4.573,1.583 5.385,1.896 0.813,0.313 10 false Restricted 5.448,1.135 6.333,1.49 0.885,0.354 10 false w/o Control 5.448,2.021 6.24,2.406 0.792,0.385 10 false w/ Control

2.

Control during Other Situations

Control Start Conditions (When all of the following conditions are met, control starts.)
·

Accelerator pedal is depressed.

·

Shift position is changed from R to D/M, D/M to R, or N to R.


Control Operation Restricts the engine output so the vehicle speed and acceleration are at or below a certain level.
Control Stop Conditions (Control stops when any of the conditions are met.)
·

Accelerator pedal is fully released.

·

Shift position is P or N.



W110519E12
3.573,0.927 3.771,0.771 3.771,0.771 3.979,0.771 true 5,1.406 5.156,1.24 5.156,1.24 5.344,1.24 true 4.927,2.198 5.083,2.031 5.083,2.031 5.271,2.031 true 1.615,0.198 2.573,0.594 0.958,0.396 10 false Shift Position 1.354,0.573 2.5,0.958 1.146,0.385 10 false Accelerator Pedal 4.063,0.708 4.927,1.104 0.865,0.396 10 false Control Start 2.844,0.229 3.052,0.458 0.208,0.229 10 false N 3.406,0.229 3.615,0.458 0.208,0.229 10 false R 2.781,0.573 3.083,0.792 0.302,0.219 10 false ON 1.698,1.604 2.625,2.052 0.927,0.448 10 false Engine Output 3.677,2.469 4.229,2.792 0.552,0.323 10 false Time 4.563,1.552 5.385,1.854 0.823,0.302 10 false Restricted 5.427,1.146 6.24,1.552 0.813,0.406 10 false w/o Control 5.333,1.958 6.229,2.333 0.896,0.375 10 false w/ Control

HINT:
·

The engine output restraint level differs in the above 2 situations.

·

During control while a shift operation is performed (from control start until the accelerator pedal is released), the system informs the driver of the control via the combination meter assembly and headup display*.

*: Models with headup display







c.

Control during Reverse Operation

i.

Responds to excessive depression of the accelerator pedal while operating in reverse.


ii.

Corrects engine output according to the road grade.

Control Start Conditions (When all of the following conditions are met, control starts.)
·

Shift position is R.

·

Accelerator pedal is depressed excessively.


Control Operation Restricts the engine output so the vehicle speed and acceleration are at or below a certain level.
Control Stop Conditions (Control stops when any of the conditions are met.)
·

Accelerator pedal is fully released.

·

Shift position is not R.



W110517E14
3.604,1.063 3.75,0.885 3.75,0.885 3.948,0.885 true 5.031,1.406 5.135,1.177 5.135,1.177 5.375,1.177 true 5.01,2.052 5.115,1.823 5.115,1.823 5.354,1.823 true 1.583,0.208 2.677,0.5 1.094,0.292 10 false Shift Position 1.302,0.573 2.49,0.927 1.188,0.354 10 false Accelerator Pedal 1.583,1.604 2.583,1.969 1,0.365 10 false Engine Output 3.802,2.49 4.458,2.76 0.656,0.271 10 false Time 4.542,1.5 5.281,1.771 0.74,0.271 10 false Restricted 5.438,1.104 6.281,1.458 0.844,0.354 10 false w/o Control 3.271,0.573 3.635,0.813 0.365,0.24 10 false ON 2.823,0.229 3.031,0.438 0.208,0.208 10 false R 4.01,0.802 4.969,1.115 0.958,0.313 10 false Control Start 5.438,1.729 6.26,2.115 0.823,0.385 10 false w/ Control