Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › SFI SYSTEM
NM38G0E _51 Engine / Hybrid System _101627 V35A-FTS ENGINE CONTROL _0478156 SFI SYSTEM CO CONTROL F

V35A-FTS ENGINE CONTROL  SFI SYSTEM  CONTROL  DIRECT INJECTION 4-STROKE GASOLINE ENGINE SUPERIOR VERSION SEQUENTIAL MULTIPORT FUEL INJECTION (D-4S SFI)  


FUNCTION


a.

A Direct injection 4-stroke gasoline engine Superior version Sequential multiport Fuel Injection (D-4S SFI) system which has both direct injection type and port injection type is used for the fuel injection system.


b.

The intake air mass is detected by the intake mass air flow meter sub-assembly to control the fuel injection volume.


c.

Based on signals from each sensor, the ECM controls the injection volume and timing of each type of injector assembly (for direct injection and port injection) in accordance with the engine speed and engine load in order to optimize combustion conditions. Due to this, engine oil dilution reduction, low fuel consumption, and improved emission as well as high engine output are achieved.


d.

In order to fully maximize the effectiveness of the direct injection (cooling effect, jet stream use, air-fuel mixture form variance), multi-fuel injection system in which injection is divided over multiple times is used. A D-4S injection control system that maximizes the merits of the port injection and direct injection is used.


e.

During engine start while the idling stop control is operating, direct injection is used. Fuel is directly injected into the cylinder stopped by the compression stage. This allows the engine to start quickly and smoothly.

Fuel Injector System Activation Ranges
W138633E05
2.896,1.615 3.385,0.313 3.385,0.313 3.604,0.313 true 5.406,1.031 5.813,1.031 true 5.875,0.958 6.917,1.24 1.042,0.281 10 false Direct Injection 2.479,1.844 3.604,2.26 1.125,0.417 10 false Direct Injection or Port Injection 3.677,0.229 5.698,0.479 2.021,0.25 10 false Direct Injection + Port Injection 0.635,1.177 1.5,1.49 0.865,0.313 10 false Engine Load 3.469,2.385 4.448,2.635 0.979,0.25 10 false Engine Speed

Fuel Injection Timing
W148532E02
0.135,0.156 1.469,0.635 1.333,0.479 10 false Direct Injection 0.177,2.813 1.302,3.271 1.125,0.458 10 false Port Injection 2.646,0.177 3.667,0.896 1.021,0.719 10 false Air-fuel mixture time ensured 3.885,0.083 6.76,0.469 2.875,0.385 10 false Disturbance facilitation via jet effect + knocking control 1.99,0.469 2.438,0.719 0.448,0.25 10 false TDC 4.198,0.469 4.646,0.719 0.448,0.25 10 false BDC 5.646,0.698 7.156,1.094 1.51,0.396 10 false Improved Fuel Economy 5.656,3.167 6.677,4.104 1.021,0.938 10 false Fuel Economy Improved / PN Suppression 2.635,1.198 3.76,1.917 1.125,0.719 10 false Air-fuel mixture time ensured 0.573,0.802 2.042,1.188 1.469,0.385 10 false When Engine is Warm 0.677,1.823 2.083,2.208 1.406,0.385 10 false When Engine is Cold 1.99,2.927 2.438,3.177 0.448,0.25 10 false TDC 4.198,2.917 4.646,3.167 0.448,0.25 10 false BDC 2.656,2.625 5.427,2.927 2.771,0.302 10 false INJ tip deposit suppressed 2.635,3.646 3.76,4.365 1.125,0.719 10 false Air-fuel mixture time ensured 5.646,1.708 7.156,2.104 1.51,0.396 10 false Improved Fuel Economy 5.646,4.156 7.156,4.552 1.51,0.396 10 false Improved Fuel Economy 3.885,1.104 6.792,1.51 2.906,0.406 10 false Disturbance facilitation via jet effect + knocking control 0.573,3.26 2.042,3.646 1.469,0.385 10 false When Engine is Warm 0.677,4.26 2.083,4.646 1.406,0.385 10 false When Engine is Cold

W148554E01
0.24,0.146 3.104,0.385 2.865,0.24 10 false Mass Air Flow Meter Sub-assembly x 2 0.594,0.708 2.521,0.927 1.927,0.219 10 false Intake Air Temperature Sensor 0.896,1.323 2.333,1.542 1.438,0.219 10 false Crank Position Sensor 0.635,1.76 2.729,1.979 2.094,0.219 10 false Cam Position Sensor (Intake) x 2 0.531,2.198 2.729,2.427 2.198,0.229 10 false Cam Position Sensor (Exhaust) x 2 0.563,2.698 2.927,2.938 2.365,0.24 10 false Air Fuel Ratio Sensor (Bank 1) x 2 0.563,3.167 2.927,3.406 2.365,0.24 10 false Air Fuel Ratio Sensor (Bank 2) x 2 0.833,4.771 2.406,5.01 1.573,0.24 10 false Throttle Position Sensor 0.438,4.208 2.875,4.438 2.438,0.229 10 false Throttle Body with Motor Assembly 0.427,5.479 2.917,5.688 2.49,0.208 10 false Engine Coolant Temperature Sensor 0.688,6.052 2.552,6.438 1.865,0.385 10 false Intake Air Temperature Sensor (No. 3 Turbo Pressure Sensor) 0.625,6.854 2.698,7.063 2.073,0.208 10 false No. 1 Turbo Pressure Sensor 0.271,7.51 3.052,7.708 2.781,0.198 10 false Fuel Pressure Sensor (for High Pressure) 0.302,8.021 3.052,8.219 2.75,0.198 10 false Fuel Pressure Sensor (for Low Pressure) 4.198,3.656 4.615,3.906 0.417,0.25 10 false ECM 5.583,3.479 6.76,3.927 1.177,0.448 10 false Direct Fuel Injector Assembly 5.646,0.917 6.729,1.344 1.083,0.427 10 false Port Fuel Injector Assembly


f.

Fuel Cut

i.

When the engine speed exceeds the specified value, fuel injection is stopped to prevent over-revving.

Engine Speed for Fuel-cut at High Revs
Engine Speed (r/min) 6200 or more