CONSTRUCTION
The No. 3 turbo pressure sensor is installed to the intake air surge tank assembly and is comprised of the turbo pressure sensor and thermistor type intake air temperature sensor which detects the intake air temperature.
The No. 1 turbo pressure sensor is composed of silicone chips that detect the intake valve pressure. This sensor is connected to the intercooler assembly and detects the pressure on the outlet side of the compressor.
The turbo pressure sensor is a semiconductor type pressure sensor that uses the changing electrical resistance properties when pressure is applied to crystals (silicone). This sensor converts intake valve pressure (absolute pressure*) to electrical signals, amplifies them and outputs them to the ECM as an intake pipe pressure signal.
Absolute pressure: This is the pressure when the vacuum state is set to 0.