Home › Engine / Hybrid System › V35A-FTS (EMISSION CONTROL) › EVAPORATIVE EMISSION CONTROL SYSTEM
NM38G0E _51 Engine / Hybrid System _101630 V35A-FTS EMISSION CONTROL _0478160 EVAPORATIVE EMISSION CONTROL SYSTEM CO CONTROL F

V35A-FTS EMISSION CONTROL  EVAPORATIVE EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Charcoal Canister Assembly Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank assembly.
Purge VSV (Duty Vacuum Switching Valve) Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the charcoal canister assembly into the intake manifold.
ECM Controls the purge VSV (duty vacuum switching valve) in accordance with the signals from various sensors, in order to achieve a purge volume that suits the driving conditions.


FUNCTION


a.

The fuel fumes absorbed by the canister are drawn to the intake port through the purge port installed downstream from the throttle valve.


b.

The ECM controls the purge flow of the evaporative emission (HC) from the charcoal canister assembly in accordance with engine conditions.


c.

A purge VSV (duty vacuum switching valve assembly) is provided and a check valve is provided inside the intake manifold to prevent the reverse flow of intake air towards the canister due to the turbo pressure.