Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › DYNAMIC RADAR CRUISE CONTROL SYSTEM
NM38G0E _95 ADAS / AD _102011 ADVANCED DRIVER ASSISTANCE SYSTEM _0478776 DYNAMIC RADAR CRUISE CONTROL SYSTEM DE DETAILS F

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM  DETAILS  CRUISE CONTROL MAIN SWITCH  


CONSTRUCTION


a.

The operation switches of the dynamic radar cruise control system (cruise control main switch, -SET switch, +RES switch, CANCEL switch and vehicle-to-vehicle distance control switch) are positioned in the steering pad switch assembly.

Y278646C01
2.385,1.438 2.521,0.615 true 2.427,3.354 2.208,2.385 true 3.333,3.323 2.844,2.323 true 5.292,2.49 3.688,2.271 true 2.844,2 3.51,0.885 true 2.448,0.469 2.76,0.625 0.313,0.156 10 false *1 2.365,3.396 2.677,3.552 0.313,0.156 10 false *2 3.302,3.333 3.615,3.49 0.313,0.156 10 false *3 5.344,2.438 5.656,2.594 0.313,0.156 10 false *4 3.458,0.729 3.771,0.885 0.313,0.156 10 false *5
*1 Vehicle-to-vehicle Distance Control Switch *2 Cruise Control Main Switch
*3 -SET Switch *4 CANCEL Switch
*5 +RES Switch - -


Component Function

*: Models with Road Sign Assist (RSA) system

Cruise Control Main Switch
·

Turns the dynamic radar cruise control system on and off.

·

Switches between constant speed control mode and vehicle-to-vehicle distance control mode.


+RES Switch Performs accelerator control, tap-up control, resume control and dynamic radar cruise control with road sign assist*.
-SET Switch Performs set control, coast control, tap-down control and dynamic radar cruise control with road sign assist*.
CANCEL Switch Cancels control.
Vehicle-to-vehicle Distance Control Switch Switches between the vehicle-to-vehicle distance settings.



OPERATION


a.

Cruise Control Main Switch

i.

When the dynamic radar cruise control system is turned on using the cruise control main switch, the system starts in vehicle-to-vehicle distance control mode. When the cruise control main switch is pushed and held for 1.5 seconds or more from the cruise control system off, the system changes to constant speed control mode.



b.

Vehicle-to-vehicle Distance Control Switch

i.

While the vehicle is being driven in vehicle-to-vehicle distance control mode, the vehicle-to-vehicle distance setting can be changed as follows each time the vehicle-to-vehicle distance control switch is pressed; long → middle → short → long.


ii.

If the ignition switch is turned off and back ON, the system will default to "long".


iii.

The vehicle-to-vehicle distance is as follows:

Mode Vehicle-to-vehicle Distance*

*: While driving at a speed of 80 km/h (50 mph).

Long Approximately 50 m (160 ft.)
Middle Approximately 40 m (130 ft.)
Short Approximately 30 m (100 ft.)