Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2021.04–2021.07
NM38G0E _51 Engine / Hybrid System _104146 CRUISE CONTROL _0478791 CRUISE CONTROL SYSTEM CO CONTROL F

CRUISE CONTROL  CRUISE CONTROL SYSTEM  CONTROL  CRUISE CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the cruise control system have the following functions:

Component Function

*1: Models with 1GR-FE engine

*2: Except models with 1GR-FE engine

Steering Pad Switch Assembly Cruise Control Main Switch Turns the cruise control system on and off.
CANCEL Switch Outputs a cancel signal to the ECM when this switch is operated.
+RES Switch Output the accelerate function and resuming of a preset speed signals to the ECM when this switch is operated.
-SET Switch Output the decelerate function and vehicle speed setting signals to the ECM when this switch is operated.
Stop Light Switch Assembly Detects brake pedal depression and transmits its signal to the ECM.
Park/Neutral Position Switch Assembly Detects the shift lever position and transmits signals to the ECM.
Transmission Control Switch
·

Detects the shift lever position and transmits signals to the ECM.

·

Informs the ECM of driver upshift or downshift operations while the shift lever is in S*1 or M*2.


VSC OFF Switch Outputs a VSC OFF or TRC OFF signal to the No. 2 skid control ECU when this switch is operated.
Electric Parking Brake Switch Assembly Electric Parking Brake Switch Sends a parking brake application signal to the No. 2 skid control ECU.
Accelerator Pedal Sensor Assembly Detects the accelerator pedal depression angle and transmits it to the ECM.
Throttle Body with Motor Assembly Throttle Control Motor Adjusts the throttle valve opening angle in accordance with signals from the ECM.
Throttle Position Sensor Detects the throttle valve opening angle and outputs it to the ECM.
Combination Meter Assembly Cruise Control Indicator
·

Illuminates when the cruise control system has been turned on using the cruise control main switch.

·

Turns off if a malfunction occurs in the cruise control system.


Cruise SET Indicator Illuminates when the vehicle speed is set.
Multi-information Display
·

Displays a warning message to alert the driver in accordance with a signal provided by the ECM.

·

Displays the system conditions in accordance with a signal provided by the ECM during cruise control operation.


Buzzer Sounds to inform the driver if the ECM detects automatic cancel or warning signals while the vehicle is operating under cruise control.
ECM
·

Controls all functions of the cruise control system in accordance with the signals from switches, sensors and ECUs.

·

Actuates the throttle control motor according to various situations.

·

If the ECM detects a malfunction in the cruise control system, it will store a Diagnostic Trouble Code (DTC).


Transmission Control ECU*2 Sends the shift position signal to the ECM.
No.2 Skid Control ECU
·

Transmits the wheel speed signal to the ECM.

·

Transmits the VSC operation signal to the ECM.


Central Gateway ECU (Network Gateway ECU) Transmits the signal between the CAN communication buses.
DLC3 The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.



FUNCTION


a.

The cruise control system has the following control functions:

Function Outline
Constant Speed Control The ECM compares the actual vehicle speed and the set speed and if the vehicle speed is lower than the set speed, the ECM calculates the optimal motive forces, and accelerates by adjusting the respective motive forces.
Set Control When this system fulfills the following conditions, and the -SET switch is pushed and released, the ECM stores the vehicle speed and maintains the vehicle constantly at that speed.
·

The cruise control system has been turned on using the cruise control main switch.

·

The vehicle is being driven at a speed of approximately 30 km/h (20 mph) or more.


Low Speed Limit Control If the vehicle speed drops below approximately 30 km/h (20 mph) while the cruise control is operating, cruise control will be canceled automatically. However, the set speed is kept in memory.
Coast Control While the -SET switch is pushed continuously, the vehicle speed and the set speed change as follows:
·

The vehicle decelerates constantly.

·

The set speed changes to the speed at which the -SET switch is released.


Tap Down Control When the -SET switch is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set speed change as follows:
·

The vehicle will decelerate in increments of approximately 1 km/h or 1 mph each time the -SET switch is operated.

·

However, if the difference between the actual vehicle speed and the set speed is greater than 5 km/h (3 mph), the set speed will change to the speed at which the vehicle is being driven at the time the -SET switch is operated.


Accelerator Control While the +RES switch is pushed continuously, the vehicle speed and the set speed change as follows:
·

The vehicle accelerates constantly.

·

The set speed changes to the speed at which the +RES switch is released.


If the -SET switch is pushed momentarily (approximately 0.6 seconds or less) when the vehicle speed is increased by depressing the accelerator pedal, the system will memorize the set speed at that speed.
Tap Up Control When the +RES switch is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set speed change as follows:
·

The vehicle will accelerate in increments of approximately 1 km/h or 1 mph for each time the +RES switch was operated.

·

However, if the difference between the actual vehicle speed and the set speed is greater than 5 km/h (3 mph), the set speed will not change.


Resume Control If the vehicle speed is above approximately 30 km/h (20 mph) or more, the +RES switch can be pushed to resume cruise control operation and reach the vehicle speed that was set at the time the driver canceled cruise control.
Shift Down Control When the vehicle is traveling uphill using cruise control, automatic transmission control may cause the transmission to shift down. During shift down control, when the end of uphill travel is determined, the transmission will shift up after a certain period of time. When the transmission shifts down during the accelerator control or the resume control, the transmission will shift up after the accelerator control or the resume control ends.
Manual Cancel Control If any of the following signals are sent to the ECM, cruise control is canceled accordingly:
·

Brake pedal depression signal

·

Shift position D off signal (shift position changed from D to any other position.)

·

Cruise control main switch off signal (cruise control main switch is pushed.)

·

CANCEL switch on signal (CANCEL switch is pushed.)

·

Parking brake on signal (parking brake is applied.)


Automatic Cancel Control When an automatic cancel signal is sent to the ECM, cruise control operation is canceled. At this time, the type of warning sent to the driver and the control resumption condition varies according to the cancel signal.
Other Cancel Conditions
·

Ignition switch is turned off.

·

VSC is activated.

·

TRC is activated for a certain period of time.

·

TRC or VSC is turned off.





SYSTEM CONTROL


a.

Automatic Cancel Control

i.

If one of the conditions listed below occurs while the vehicle is being driven using cruise control, cruise control will be canceled. Then, the following warning item will appear for the driver.

Situation Warning
Multi-information Display
If the following condition occurs, the ECM clears the set speed and cancels the cruise control.
·

An open or short circuit in the stop light switch assembly


The cruise control is disabled until the ignition switch is turned on again.
Cruise Control
Malfunction
Visit Your Dealer
If the following condition occurs, the ECM clears the set speed and cancels the cruise control.
·

Malfunction in the engine system


The cruise control is disabled until the ignition switch is turned on again.
-
If either of the conditions listed below occurs, the ECM clears the set speed and cancels the cruise control.
·

Stop light switch assembly input signal is abnormal.

·

Cancel circuit malfunction

·

Brake control system malfunction

·

Communication malfunction between the No. 2 skid control ECU and ECM


The cruise control is disabled until the ignition switch is turned on again.
Cruise Control
Malfunction
Visit Your Dealer
If the following condition occurs, the ECM clears the set speed and cancels the cruise control.
·

The vehicle speed drops more than 16 km/h (10 mph) below the set speed.


-
If the following condition occurs, the ECM cancels the cruise control while retaining the set speed in its memory.
·

The vehicle speed drops below the low speed limit [approximately 30 km/h (20 mph)].


-




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). For details, refer to the Repair Manual.