CONSTRUCTION
A cooler thermistors (room temperature sensor and duct sensor*) are used.
*: Models with rear air conditioning unit
The cooler thermistor uses the air flow volume in the air conditioning unit and rear air conditioning unit to pass cabin air past the sensor, detecting the cabin temperature using the internal thermistor and outputting it to the air conditioning amplifier assembly.
The installation position is inside the instrument panel.
| *1 | Cooler Thermistor (Room Temperature Sensor) | - | - |
| *a | This illustration is an example only. | - | - |
The installation position is inside the quater inner trim.
| *A | Models with multi-zone (4-ZONE) climate control | - | - |
| *1 | Cooler Thermistor (Duct Sensor) | - | - |
| *a | This illustration is an example only. | - | - |