OPERATION
A semiconductor type air injection control driver is used. Activated by the ECM, this driver actuates the air pump assembly and the emission control valve set.
The air injection control driver also detects failures in the input and output circuits at the air injection control driver and transmits the failure status to the ECM via duty cycle signals.
| Condition | AIRP | AIRV | Output (Duty Cycle Signal) |
|---|---|---|---|
| Open circuit in line between AIDI and DI terminals. | - | - |
0.104,0.531 0.563,0.729 0.458,0.198 8 false GND
|
| Failure in line between ECM terminals and air injection control driver. | - | - |
0.104,0.531 0.563,0.729 0.458,0.198 8 false GND
|
| Output failure at air injection control driver. (Failure in air pump actuation circuit) | - | - |
0.094,0.573 0.552,0.771 0.458,0.198 8 false GND 0.833,0.104 1.292,0.302 0.458,0.198 8 false 200 ms 1.667,0.083 2.198,0.323 0.531,0.24 8 false Duty 20%
|
| Output failure at air injection control driver. (Failure in air switching valve actuation circuit) | - | - |
0.094,0.573 0.552,0.771 0.458,0.198 8 false GND 1.677,0.073 2.198,0.333 0.521,0.26 8 false Duty 40%
|
| Failure of air injection control driver caused by overheating. | - | - |
0.094,0.583 0.469,0.74 0.375,0.156 8 false GND 1.667,0.073 2.208,0.323 0.542,0.25 8 false Duty 60%
|
| Normal | On | On |
0.094,0.583 0.469,0.74 0.375,0.156 8 false GND 1.656,0.083 2.198,0.323 0.542,0.24 8 false Duty 80%
|
| Off | Off |
0.083,0.417 0.458,0.573 0.375,0.156 8 false GND
|
|
| On | Off | ||
| Off | On |