Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM38G0E _54 Brake _102389 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0479577 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  MULTI-TERRAIN SELECT  


SYSTEM CONTROL


a.

Multi-terrain select is a function that switches to the optimal control for the road conditions, including motive force control, brake control and suspension control, when the driver performs a switch operation to select an appropriate mode for the road conditions. Optimal control for the road conditions is automatically performed, maintaining driving performance and achieving superior off-road driveability.


b.

In multi-terrain select, the mode can be selected from 6 modes: "MUD", "DIRT", "AUTO", "DEEP SNOW", "SAND" and "ROCK".

X149414E01
1.688,2.083 2.146,2.281 0.458,0.198 10 false MUD 5.281,1.844 5.74,2.042 0.458,0.198 10 false DIRT 1.698,4.135 2.156,4.333 0.458,0.198 10 false AUTO 5.135,4.094 6.083,4.292 0.948,0.198 10 false DEEP SNOW 1.656,6.344 2.115,6.542 0.458,0.198 10 false SAND 5.208,6.365 5.667,6.563 0.458,0.198 10 false ROCK


c.

A signal for the selected multi-terrain select mode is input into the ECM. The ECM sends the multi-terrain select mode signal to the No. 2 skid control ECU and the ECUs of parts such as the combination meter via CAN communication.


d.

According to the multi-terrain select mode signal, the No. 2 skid control ECU optimally controls the brake amount of the 4 wheels, the stabilizer control ECU optimally performs suspension control and the ECM optimally controls the motive force.

HINT:

The mode of multi-terrain select that can be selected varies according to the transfer drive mode.


Transfer Drive Mode Mode Control Control Results
H4 MUD Motive Force Control Control that switches characteristics to ensure the optimal motive force according to each road surface when the accelerator pedal is operated. Driving while spinning the tires and spraying mud on a muddy road (extremely low friction surface).
Brake Control (A-TRC) Control that makes the wheels slip more than in normal control and suppresses motive force loss to ensure muddy road driving performance, while also lessening any large disturbances in vehicle behavior that occur.
Suspension Control (Stabilizer) Control that applies the stabilizer to the front wheels only while turning to ensure driving stability and riding comfort.
SAND Motive Force Control Control that switches characteristics to ensure the optimal motive force according to each road surface when the accelerator pedal is operated. Control that prevents the vehicle from becoming stuck in sand with a shift pattern that suppresses upshifting when the accelerator is off. Driving that makes the tires slip appropriately to obtain the optimal motive force for sand. Excessive motive force that gets the vehicle stuck is not output, and motive force for cruising is necessary.
Brake Control (A-TRC) Control that makes the wheels slip more than in normal control and suppresses motive force loss to ensure sandy road driving performance, while also lessening any large disturbances in vehicle behavior that occur.
Suspension Control (Stabilizer) Control that applies the stabilizer to the front and rear wheels while turning to ensure turning performance.
DIRT Motive Force Control Control that switches characteristics to ensure the optimal motive force according to each road surface when the accelerator pedal is operated. Driving on unpaved roads with a vehicle speed and stability similar to those for paved roads. Sufficient ground contact feel for road surface undulations and bumps is ensured, and motive force that enables driving even when towing is also necessary.
Brake Control (A-TRC) Control that suppresses vehicle behavior disturbances the same as in normal control while also preventing interference with the intended acceleration from the driver's accelerator operation.
Suspension Control (Stabilizer) Control that applies the stabilizer to the front wheels only while turning to ensure driving stability and riding comfort.
DEEP SNOW Motive Force Control Control that switches characteristics to ensure the optimal motive force according to each road surface when the accelerator pedal is operated. Driving where forward and backward movement is repeated to crush walls of snow while proceeding. Also, on snow where the tires are buried, the tires are made to slip while driving like a plow to clear the snow. Excessive motive force is not output while starting off to prevent slipping. Use on compacted snow surfaces is not anticipated.
Brake Control (A-TRC) Control that makes the wheels slip more than in normal control and suppresses motive force loss to ensure deep snow driving performance, while also lessening vehicle behavior disturbances.
Suspension Control (Stabilizer) Control that applies the stabilizer to the front wheels only while turning to ensure driving stability and riding comfort.
AUTO Motive Force Control Control that estimates the current road surface of travel based on information from the various sensors and optimizes each control according to the current road surface of travel. The driver does not need to switch the mode according to the road surface or driving situation, improving the off-road driving performance.
Brake Control (A-TRC)
Suspension Control (Stabilizer)
L4 MUD Motive Force Control Control for selecting motive force characteristics for easy control of the slip amount according to the road surface. Driving while spinning the tires and spraying mud on a muddy road (extremely low friction). When the mud is so deep that it buries the tires, higher motive force is used in low speed gears.
Brake Control (A-TRC) Control that makes the wheels slip more than in normal control and prevents acceleration defects from being triggered by unnecessary braking force or torque reductions.
Suspension Control (Stabilizer) Control that expands the range in which the stabilizers are free to ensure driving performance and riding comfort.
SAND Motive Force Control Control for selecting motive force characteristics for easy control of the slip amount according to the road surface. Excessive motive force that gets the vehicle stuck is not output, and motive force for cruising is necessary. When the vehicle is stuck or the sand resistance is high, higher motive force is used in low speed gears. When the vehicle is stuck or the sand resistance is high, higher motive force is used in low speed gears.
Brake Control (A-TRC) Control that makes the wheels slip more than in normal control and prevents acceleration defects from being triggered by unnecessary braking force or torque reductions.
Suspension Control (Stabilizer) Control that expands the range in which the stabilizers are free to ensure driving performance and riding comfort.
ROCK Motive Force Control Control for selecting motive force characteristics for easy control of walking speed in rocky areas according to the road surface. Driving that suppresses tire spin in rocky areas where there are many large rocks in order to drive over the rocks. Motive force must be transmitted even when only 2 wheel tires contact the ground, and the vehicle speed must be controlled so that the vehicle does not go too far even at the moment when it climbs over the rock.
Brake Control (A-TRC) Control that suppresses wheel slip more than in normal control to more effectively utilize the tire grip force.
Suspension Control (Stabilizer) Control that expands the range in which the stabilizers are free to ensure driving performance and riding comfort.
AUTO Motive Force Control Control that estimates the current road surface of travel based on information from the various sensors and optimizes each control according to the current road surface of travel. The driver does not need to switch the mode according to the road surface or driving situation, improving the off-road driving performance.
Brake Control (A-TRC)
Suspension Control (Stabilizer)

X149415C01
3.74,0.375 4.052,0.531 0.313,0.156 10 false *a 4.417,0.979 4.729,1.135 0.313,0.156 10 false *b 5.667,0.969 5.979,1.125 0.313,0.156 10 false *c 4.458,2.125 4.771,2.281 0.313,0.156 10 false *d 5.719,2.115 6.031,2.271 0.313,0.156 10 false *e 4.427,3.25 4.74,3.406 0.313,0.156 10 false *f 5.75,3.219 6.063,3.469 0.313,0.25 10 false *g
*a Multi-terrain Select Mode Indicator *b MUD
*c DIRT *d AUTO
*e DEEP SNOW *f SAND
*g ROCK - -


VSC OFF Indicator and Slip Indicator Light when Each Mode Selected
Transfer Drive Mode Mode VSC OFF Indicator Slip Indicator Light
H4 MUD Illuminates Blinks
SAND Illuminates Blinks
DIRT - Blinks
DEEP SNOW Illuminates Blinks
AUTO - Blinks
L4 MUD Illuminates Blinks
SAND Illuminates Blinks
ROCK Illuminates Blinks
AUTO Illuminates Blinks

HINT:

The slip indicator light blinks when brake control of multi-terrain select operates.