Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
NM38G0E _58 Vehicle Interior _102328 DOOR LOCK _0481978 POWER DOOR LOCK CONTROL SYSTEM CO CONTROL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CONTROL  DOOR LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Outline

*1: Models with door control switch assembly

*2: Models without power back door system

*3: Models with double locking function

*4: Models with power back door system

*5: Models with multimedia system (for 12.3 inch display)

*6: Models with multimedia system (for 7 inch / 9 inch display)

Multiplex Network Master Switch Assembly
·

Door Control Switch


Sends door lock/unlock request signals, which are generated by manual operations of the driver side door control switch, to the main body ECU.
Door Control Switch Assembly*1 Outputs door lock/unlock request signals, which are generated by manual operations of the front passenger door control switch, to the main body ECU.
License Plate Light Assembly with Back Door Opener Switch
·

Back Door Opener Switch


Detects user switch operations and outputs back door open request signals to the certification ECU.
Power Distribution Box Assembly ALL DOOR LOCK Relay Inputs door lock request signals from the main body ECU and operates the door lock motor of all doors.
D DOOR UNLOCK Relay Inputs driver door unlock request signals from the main body ECU and operates the driver door lock motor.
ALL DOOR UNLOCK Relay Inputs door unlock request signals from the main body ECU and operates the door lock motors at the front passenger door and rear doors.
DOOR BACK Relay*2 Inputs back door open request signals from the main body ECU to operate the back door lock motor.
Front Door Lock with Motor Assembly (for Driver Door)
·

Door Lock Motor

·

Door Lock Position Switch

·

Door Lock Control Switch

·

Double Lock Motor*3

·

Double Lock Position Switch*3


·

Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the driver door.

·

Uses the built-in door lock position switch to detect whether the driver door are locked or unlocked and outputs the result to the main body ECU.

·

Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU.

·

Drives the motor by signals from the double lock door control relay assembly and activates or cancels the double locking function.*3

·

Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*3


Front Door Lock with Motor Assembly (for Front Passenger Door)
·

Door Lock Motor

·

Door Lock Position Switch

·

Double Lock Motor*3

·

Double Lock Position Switch*3


·

Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the front passenger door.

·

Uses the built-in door lock position switch to detect whether the passenger door are locked or unlocked and outputs the result to the main body ECU.

·

Drives the motor by signals from the double lock door control relay assembly and activates or cancels the double locking function.*3

·

Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*3


Rear Door Lock with Motor Assembly LH
·

Door Lock Motor

·

Door Lock Position Switch

·

Double Lock Motor*3

·

Double Lock Position Switch*3


·

Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the rear door LH.

·

Uses the built-in door lock position switch to detect whether the rear door LH is locked or unlocked and outputs the result to the main body ECU.

·

Drives the motor by signals from the double lock door control relay assembly and activates or cancels the double locking function.*3

·

Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*3


Rear Door Lock with Motor Assembly RH
·

Door Lock Motor

·

Door Lock Position Switch

·

Double Lock Motor*3

·

Double Lock Position Switch*3


·

Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the rear door RH.

·

Uses the built-in door lock position switch to detect whether the rear door RH is locked or unlocked and outputs the result to the main body ECU.

·

Drives the motor by signals from the double lock door control relay assembly and activates or cancels the double locking function.*3

·

Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*3


Back Door Lock with Courtesy Light Switch Assembly*2
·

Back Door Lock Motor

·

Courtesy Switch


·

Operates the built-in back door lock motor to release the back door latch.

·

Operates the built-in courtesy switch to detect whether the back door is open or closed and outputs the result to the main body ECU.


Back Door Lock with Courtesy Light Switch Assembly*4
·

Back Door Lock Motor

·

Sector Switch

·

Pawl Switch

·

Latch Switch

·

Courtesy Switch


·

Operates the built-in back door lock motor to fully close the back door from an ajar position or open the door from a fully closed position.

·

Operates each built-in switch to detect the operating conditions of the power back door system and outputs the result to the power back door ECU.

·

Operates the built-in courtesy switch to detect whether the back door is open or closed and outputs the result to the power back door ECU.


Double Lock Door Control Relay Assembly*3 Drives the double lock motor by means of the signals from the main body ECU, lock position switch and so on.
Front Door Courtesy Light Switch Assembly (LH) Outputs open/close signals for the front door LH to the main body ECU.
Front Door Courtesy Light Switch Assembly (RH) Outputs open/close signals for the front door RH to the main body ECU.
Rear Door Courtesy Light Switch Assembly (LH) Outputs open/close signals for the rear door LH to the main body ECU.
Rear Door Courtesy Light Switch Assembly (RH) Outputs open/close signals for the rear door RH to the main body ECU.
Main Body ECU (Multiplex Network Body ECU)
·

Detects the vehicle condition using ECU, switch signals, vehicle speed signals and airbag operation signals, to control the entire door lock control system.

·

Outputs lock/unlock signals to each door lock assembly to operate the door lock motor.

·

Outputs open signals to the back door lock with courtesy light switch assembly to operate the back door lock motor.*2

·

Sends an operation request signal to the double lock door control relay assembly in response to each signal.*3


Certification ECU (Smart Key ECU Assembly) When an entry lock/unlock operation by the user is detected, sends vehicle exterior certification result signals to the main body ECU.
Power Back Door ECU (Multiplex Network Door ECU)*4 Controls the power back door system in accordance with the signals received from the switches, sensors and ECUs.
ECM Sends shift position signals to the main body ECU via CAN communication.
Brake Actuator Assembly
·

No. 2 Skid Control ECU


Sends vehicle speed signals to the main body ECU via CAN communication.
Airbag ECU (Airbag ECU Assembly) Outputs airbag operation signals to the main body ECU.
Combination Meter Assembly Sends vehicle speed signals to the main body ECU via CAN communication.
Radio Receiver Assembly*5 Receives function customization information according to the settings screen of the multi-display assembly from the integration control assembly, and sends this information to the main body ECU.
Integration Control Assembly*5 Sends function customization information according to the settings screen of the multi-display assembly to the radio and display receiver assembly.
Multi-display Assembly*5 Displays the settings screen.
Radio and Display Receiver Assembly*6
·

Displays the settings screen.

·

Sends customization information to the main body ECU.


Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.
DLC3
·

The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.

·

The Global TechStream (GTS) can be connected to change settings as desired by the user.




FUNCTION


a.

The power door lock control system has the following functions:

Function*1 Outline
Manual Unlock This function unlocks all the doors when the door control switch is operated to the unlock side.
Manual Lock This function locks all the doors when the door control switch is operated to the lock side.
Key-linked Unlock*2 This function, which is linked with the door lock key cylinder, can unlock all the doors when an unlock operation is performed.
Key-linked 2-step Unlock*2 This function is provided to unlock the driver door when the mechanical key is turned in the door lock key cylinder the first time and to unlock the remaining doors when it is turned the second time within 5 seconds of the first time.
Key-linked Lock This function, which is linked with the door lock key cylinder, can lock all the doors when a lock operation is performed.
Collision Door Lock Release*3 If the SRS airbag system has been activated, and the main body ECU has detected the activation signal output by the airbag ECU, the main body ECU unlocks all the doors.
Manual Unlock Prohibition When the doors are all closed and are locked using a key-linked lock operation, wireless door lock operation or entry lock operation, unlocking the vehicle using the door control switch is prohibited.
Driver Door Opening-linked Automatic Door Unlock*4 When the driver door is opened within 45seconds of the ignition switch being turned from on (IG) to on (ACC) or off, all of the doors will be automatically unlocked.
Shift-linked Automatic Door Unlock*5 When the ignition switch is on (IG) and the shift lever is moved to P position from a position other than P, all of the doors will be automatically unlocked.
Shift-linked Automatic Door Lock*6 When the conditions listed below are met, this function causes all the doors to be automatically locked:
·

The ignition switch is changed from on (ACC) or off to on (IG).

·

All the doors are closed.

·

The shift lever is moved out of P position.

·

Any of the doors are in an unlocked state.


Speed Sensitive Automatic Door Lock*7 When the conditions listed below are met, this function causes all the doors to be automatically locked:
·

Vehicle speed is higher than approximately 20 km/h (12 mph).

·

All the doors are closed.

·

Any of the doors is unlocked.


Key Confinement Prevention When the electrical key is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.
Double Locking*8
·

The double locking function also prevents the doors from being opened through the operation of the inside door knobs. As a result, the doors cannot be opened from either inside or outside of the vehicle.

·

Pressing the lock button on the electrical key once and then pressing it again within 5 seconds activates the double locking function. However, as an emergency unlocking maneuver, only the driver door can be unlocked with a mechanical key.


NOTICE:

Never activate the double locking system when there are people in the vehicle because the doors cannot be opened from the inside of the vehicle. If the doors have been locked by accident, press the unlock button of the electrical key.


HINT:
·

If the key battery is depleted, only the driver door can be opened using the mechanical key.

·

Despite the above, the theft deterrent system will remain on. The theft alarm will sound when the door is opened without using the electrical key.*9



Customization Turning on or off of some functions or settings can be performed using the Global TechStream (GTS), multi-display assembly*10 or radio and display receiver assembly*11. In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual.

HINT:

*1: The default setting differs depending on the model.

*2: The function can be set to unlock all the doors after 1 or 2 key-linked unlock operations for the driver side by using the customization function.

*3: Models with collision door lock release function

*4: Models with driver door opening-linked automatic door unlock function

*5: Models with shift-linked automatic door unlock function

*6: Models with shift-linked automatic door lock function

*7: Models with speed sensitive automatic door lock function

*8: Models with double locking function

*9: Models with theft deterrent system

*10: Models with multimedia system (for 12.3 inch display)

*11: Models with multimedia system (for 7 inch / 9 inch display)




DIAGNOSIS


a.

If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.