OUTLINE
The wireless door lock control system is a convenient system for locking and unlocking all the doors and operating the power back door*1 from a distance.
In this system, the door control receiver performs the code identification process and the main body ECU performs door lock control.
An electrical key is used, and it contains up to a maximum of 4 buttons: lock button, unlock button, panic button*2 and power back door button*1.
When preparing a new electrical key to replace one that has been lost, it is necessary to register the recognition code. For details, refer to the Service Bulletin.
The customization function of the Global TechStream (GTS), multi-display assembly*3 or radio and display receiver assembly*4 makes it possible to adjust and change the settings for each function.
*1: Models with power back door system
*2: Models with panic alarm function
*3: Models with multimedia system (for 12.3 inch display)
*4: Models with multimedia system (for 7 inch / 9 inch display)
PRECAUTION
Door Control Receiver Expressions
The type of door control receiver used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| Models with Tire Pressure Warning System | Door Control Receiver | Electrical Key and TPMS Receiver Assembly |
| Models without Tire Pressure Warning System | Door Control Receiver | Smart Door Control Receiver Assembly |