FUNCTION OF MAIN COMPONENTS
The main components in the wireless door lock control system have the following functions:
| Component | Outline | |
|---|---|---|
|
*1: Models with power back door system *2: Models with panic alarm function *3: Models without power back door system *4: Models with double locking function *5: Models with multimedia system (for 12.3 inch display) *6: Models with multimedia system (for 7 inch / 9 inch display) |
||
| Electrical Key Transmitter Sub-assembly | When a driver pushes the lock button, unlock button, power back door button*1 or panic button*2 on the key, the key outputs a request signal. | |
| Door Control Receiver | Receives a lock/unlock, power back door*1 or panic button*2 operation signal from the electrical key transmitter sub-assembly and sends this information to the certification ECU. | |
| Wireless Door Lock Buzzer | Sounds to inform the driver when warning conditions are met. | |
| Power Distribution Box Assembly | D DOOR UNLOCK Relay | Inputs driver door unlock request signals from the main body ECU and operates the driver door lock motor. |
| ALL DOOR UNLOCK Relay | Inputs door unlock request signals from the main body ECU and operates the door lock motors at the front passenger door and rear doors. | |
| ALL DOOR LOCK Relay | Inputs door lock request signals from the main body ECU and operates the door lock motors of all doors. | |
| DOOR BACK Relay*3 | Inputs back door open request signals from the main body ECU to operate the back door lock motor. | |
| Front Door Lock with Motor Assembly LH
·
Door Lock Motor
·
Door Lock Position Switch
·
Double Lock Motor*4
·
Double Lock Position Switch*4 |
·
Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the driver door.
·
Uses the built-in door lock position switch to detect whether the driver door is locked or unlocked and outputs the result to the main body ECU.
·
Drives the motor in response to signals from the double lock door control relay assembly and activates or cancels the double locking function.*4
·
Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*4 |
|
| Front Door Lock with Motor Assembly RH
·
Door Lock Motor
·
Door Lock Position Switch
·
Double Lock Motor*4
·
Double Lock Position Switch*4 |
·
Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the front passenger door.
·
Uses the built-in door lock position switch to detect whether the passenger door is locked or unlocked and outputs the result to the main body ECU.
·
Drives the motor in response to signals from the double lock door control relay assembly and activates or cancels the double locking function.*4
·
Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*4 |
|
| Rear Door Lock with Motor Assembly LH
·
Door Lock Motor
·
Door Lock Position Switch
·
Double Lock Motor*4
·
Double Lock Position Switch*4 |
·
Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the rear door LH.
·
Uses the built-in door lock position switch to detect whether the rear door LH is locked or unlocked and outputs the result to the main body ECU.
·
Drives the motor in response to signals from the double lock door control relay assembly and activates or cancels the double locking function.*4
·
Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*4 |
|
| Rear Door Lock with Motor Assembly RH
·
Door Lock Motor
·
Door Lock Position Switch
·
Double Lock Motor*4
·
Double Lock Position Switch*4 |
·
Operates the built-in door lock motor in the forward or reverse direction under the control of the main body ECU to lock or unlock the rear door RH.
·
Uses the built-in door lock position switch to detect whether the rear door RH is locked or unlocked and outputs the result to the main body ECU.
·
Drives the motor in response to signals from the double lock door control relay assembly and activates or cancels the double locking function.*4
·
Detects the operating conditions of the double lock motor and sends this information to the double lock door control relay assembly.*4 |
|
| Back Door Lock with Courtesy Light Switch Assembly*1
·
Back Door Lock Motor
·
Sector Switch
·
Pawl Switch
·
Latch Switch
·
Courtesy Switch |
·
Operates the built-in back door lock motor to fully close the back door from an ajar position or open the door from a fully closed position.
·
Operates each built-in switch to detect the operating conditions of the power back door system and outputs the result to the power back door ECU.
·
Operates the built-in courtesy switch to detect whether the back door is open or closed and outputs the result to the power back door ECU. |
|
| Back Door Lock with Courtesy Light Switch Assembly*3
·
Back Door Lock Motor
·
Courtesy Switch |
·
Rotates the built-in door lock motor to lock and unlock the back door.
·
Uses the built-in door lock position switch to detect whether the back door are locked or unlocked and outputs the result to the main body ECU.
·
Outputs open/close signals for the back door to the main body ECU. |
|
| Double Lock Door Control Relay Assembly*4 | Drives the double lock motor based on the signals from the main body ECU, lock position switch and so on. | |
| Front Door Courtesy Light Switch Assembly (LH) | Outputs open/close signals for the front door LH to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly (RH) | Outputs open/close signals for the front door RH to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (LH) | Outputs open/close signals for the rear door LH to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (RH) | Outputs open/close signals for the rear door RH to the main body ECU. | |
| Main Body ECU (Multiplex Network Body ECU) |
·
Detects the vehicle condition using ECU and switch signals to control the entire door lock control system.
·
Outputs lock/unlock signals to each door lock assembly to operate the door lock motor.
·
Outputs answer back request signals when a wireless remote control is performed.
·
Sends an operation request signal to the double lock door control relay assembly in response to each signal.*4 |
|
| Certification ECU (Smart Key ECU Assembly) |
·
Sends wireless remote control signals input from the door control receiver to the main body ECU and power back door ECU*1 via CAN communication.
·
Sends activation or cancellation signals for the double locking function that was input from the door control receiver to the main body ECU via CAN communication.*4 |
|
| Power Back Door ECU (Multiplex Network Door ECU)*1 |
·
Receives power back door operation request signals from the certification ECU to operate the back door lock motor.
·
Determines the operation condition of the power back door system from the ON/OFF signals of each switch built into the back door lock with courtesy light switch assembly and sends signals to the main body ECU via CAN communication. |
|
| ECM | Sends shift position signals to the main body ECU via CAN communication. | |
| Brake Actuator Assembly
·
No. 2 Skid Control ECU |
Sends vehicle speed signals to the main body ECU via CAN communication. | |
| Combination Meter Assembly |
·
Blinks the hazard warning lights as an answer back when a wireless remote control is performed.
·
Sends vehicle speed signals to the main body ECU via CAN communication. |
|
| Radio Receiver Assembly*5 | Receives function customization information according to the settings screen of the multi-display assembly from the integration control assembly, and sends this information to the main body ECU. | |
| Integration Control Assembly*5 | Sends function customization information according to the settings screen of the multi-display assembly to the radio and display receiver assembly. | |
| Multi-display Assembly*5 | Displays the settings screen. | |
| Radio and Display Receiver Assembly*6 |
·
Displays the settings screen.
·
Sends customization information to the main body ECU. |
|
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
| DLC3 |
·
The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.
·
The Global TechStream (GTS) can be connected to change settings as desired by the user. |
|
FUNCTION
The wireless door lock control system has the following functions:
| Function*1 | Outline |
|---|---|
| All Doors Lock | Pressing the lock button of the electrical key locks all doors and the back door. |
| All Doors Unlock (1-step Unlock)*2 | Pressing the unlock button of the electrical key unlocks all doors and the back door. |
| All Doors Unlock (2-step Unlock)*2 | Pressing the unlock button on the electrical key once unlocks the driver door, and pressing it again within 5 seconds unlocks all the doors. |
| Power Back Door Open or Close*3 | Pressing and holding the power back door button for approximately 0.8 second opens and closes the back door. |
| Power Back Door Reserve Lock*3 | When a door other than the back door is closed and the door lock is operated by electrical key during closing operation of the back door, a door lock operation is performed at that time. The door lock operation completes when the closing operation of the back door ends. |
| Answer Back |
·
When the doors are being locked or unlocked using the electrical key, the wireless door lock buzzer sounds*4 and the hazard warning lights blink once while locking and twice while unlocking.
·
When the power back door is opened and closed by using the electrical key, the hazard warning lights blink twice as an answer back.*3 |
| Panic Alarm*5 | Pressing and holding the panic button of the electrical key for more than approximately 0.8 seconds causes the following to activate as an alarm:
·
Sounds the vehicle horn and security horn*6.
·
Flashes the hazard warning lights and exterior lights.
·
The map lights are illuminated (if the door-linked interior light switch is on).*7
·
The no.1 dome light is illuminated (if the interior light switch is in the DOOR position).*8 |
| Door Ajar Warning | If any door is open or ajar, pressing the lock button of the electrical key will cause the wireless door lock buzzer to sound for approximately 5 seconds. |
| Automatic Relock | If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically. |
| Repeat | If a door is not locked in response to the locking operation of the electrical key, the main body ECU will output a lock signal again after 1 second elapses. |
| Security | Sends a door lock/unlock operation request signal as a rolling code. |
| Customization | The on or off setting of some functions and settings can be performed using the Global TechStream (GTS). In addition, some functions are not available depending on specification. For details, refer to the Repair Manual. |
*1: The default setting differs depending on the model.
*2: The function can be set to unlock all the doors after 1 or 2 wireless door lock control operations by using the customization function.
*3: Models with power back door system
*4: Models with answer back buzzer function
*5: Models with panic alarm function
*6: Models with security horn
*7: Models with map light
*8: Models without rear map light
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.