Home › Vehicle Interior › DOOR LOCK › POWER BACK DOOR OPEN SYSTEM
NM38G0E _58 Vehicle Interior _102328 DOOR LOCK _0481980 POWER BACK DOOR OPEN SYSTEM CO CONTROL F

DOOR LOCK  POWER BACK DOOR OPEN SYSTEM  CONTROL  POWER BACK DOOR OPEN CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Outline
License Plate Light Assembly with Back Door Opener Switch
·

Back Door Opener Switch


Detects user switch operations and outputs opener switch signals to the certification ECU.
Power Distribution Box Assembly
·

DOOR BACK Relay


Inputs opener switch signals from the main body ECU to operate the back door lock motor.
Back Door Lock with Courtesy Light Switch Assembly
·

Back Door Lock Motor

·

Courtesy Switch


·

Operates the built-in back door lock motor to release the back door latch.

·

Operates the built-in courtesy switch to detect whether the back door is open or closed and outputs the result to the main body ECU.


Main Body ECU (Multiplex Network Body ECU) Outputs opener switch signals to the DOOR BACK relay to operate the back door lock motor.
Certification ECU (Smart Key ECU Assembly) Sends back door opener switch signals to the main body ECU.
Combination Meter Assembly Sends vehicle speed signals to the certification ECU via CAN communication.


SYSTEM CONTROL


a.

When the back door opener switch is pressed while the back door is closed, all doors or the driver door is unlocked, and the vehicle speed is approximately 5 km/h or less, the opener switch signal is output to the certification ECU.


b.

After the input of this signal, the certification ECU sends opener switch signals to the main body ECU.


c.

The main body ECU operates the DOOR BACK relay to make the latch release current flow to the back door lock motor, which releases the latch.

HINT:

When the +B power source is turned off and then reconnected, such as when disconnecting and reconnecting the battery (when the +B power source is turned on for the first time), the back door is locked regardless of whether the driver door is locked or unlocked, and the latch is not released even if the back door opener switch is operated. In this case, use any of the procedures of the power door lock control system, wireless door lock control system or smart key system to perform the unlock operation, and then operate the back door opener switch.