OUTLINE
The entry and start system has the following main functions, making it a very user-friendly system:
| Function | Outline | |
|---|---|---|
| Entry Function | Entry Unlock | The doors are unlocked by grabbing the door outside handle or pressing the back door opener switch while carrying the electrical key.
·
The driver door outside handle unlocks the driver door. (Driver Door Unlock Mode)
·
The driver door outside handle unlocks all doors. (All Door Unlock Mode)
·
The front passenger door outside handle unlocks all doors.
·
The rear door outside handles unlock all doors.*1
·
The back door opener switch unlocks all doors. |
| Entry Lock | All doors are locked by touching the lock sensor of the door outside handle or pressing the lock switch of the back door while carrying the electrical key. | |
| Hands Free Power Back Door*2 | The back door is opened by performing the touchless kick actuation operation while carrying the electrical key. | |
| Wireless Door Lock Control | The wireless door lock control function is a convenient system for locking and unlocking all the doors or opening and closing the power back door*3 from a distance. The basic operation is the same as that of the wireless door lock control system. | |
| Start Function | The start function is operated by simply pressing the engine switch while carrying the electrical key. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IGP relay and IGR relay to switch the power source pattern.*4
·
The power source mode changes depending on the depression of the brake pedal and the shift lever position. |
|
| Immobiliser | The immobiliser function compares the ID code registered in the ID code box with the ID code of the transponder chip embedded in the electrical key. | |
| Steering Lock | The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly. | |
*1: Models with rear door entry function
*2: Models with hands free power back door
*3: Models with power back door system
*4: In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source condition is also expressed using conventional expressions such as "ignition switch off", "ignition switch on (ACC)" and "ignition switch on (IG)".
PRECAUTION
Door Control Receiver Expressions
The type of door control receiver used on this model differs according to the specifications of the vehicles. The expressions listed in the table below are used in this section:
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| Models with Tire Pressure Warning System | Door Control Receiver | Electrical Key and TPMS Receiver Assembly |
| Models without Tire Pressure Warning System | Door Control Receiver | Smart Door Control Receiver Assembly |