OUTLINE
The theft deterrent system will operate when an attempt is made to forcibly enter the vehicle, open the engine hood, or unlock any door without the electrical key, when the battery terminals are removed and reconnected, when objects moving in the cabin are detected*1 or when the vehicle is determined to be sloping*1 or when window glass is broken*1.
The system consists of power door lock control system components, wireless door lock control system components, entry and start system components, a security horn*2, a theft warning siren*1, an intrusion sensor*1, a tilt sensor*1, a print pattern type glass breakage sensors*1 and a security indicator light.
This system is controlled by the main body ECU.
*1: Models with theft sensor cancel switch
*2: Models without theft sensor cancel switch
SPECIFICATION
|
*1: Models without theft sensor cancel switch *2: Models with theft sensor cancel switch |
||
| Warning Method | Hazard Warning Lights | Blink |
| Vehicle Horns | Sound a warning in approximately 0.4-second cycles | |
| Security Horn*1 | Sounds a warning in approximately 0.4-second cycles | |
| Theft Warning Siren*2 | Sounds a warning at the cycle of the theft warning siren assembly | |
| Door Lock Motors | Lock | |
| Warning Time | Approximately 27.5 seconds | |
PRECAUTION
Door Control Receiver Expressions
The type of door control receiver used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| Models with Tire Pressure Warning System | Door Control Receiver | Electrical Key and TPMS Receiver Assembly |
| Models without Tire Pressure Warning System | Door Control Receiver | Smart Door Control Receiver Assembly |