Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
NM38G0E _56 Audio / Visual / Telematics _102329 PARK ASSIST / MONITORING _0481983 TOYOTA PARKING ASSIST-SENSOR SYSTEM CO CONTROL F

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  CONTROL  TOYOTA PARKING ASSIST-SENSOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with multi-terrain monitor system

*2: Models with parking assist monitor system

*3: Models with multimedia system (for 12.3 inch display)

*4: Models with multimedia system (for 7 inch / 9 inch display)

Front Corner Ultrasonic Sensor RH/LH Sends ultrasonic waves to detect static objects and outputs a signal to the clearance warning ECU assembly.
Front Center Ultrasonic Sensor RH/LH
Rear Corner Ultrasonic Sensor RH/LH
Rear Center Ultrasonic Sensor RH/LH
Clearance Warning ECU Assembly
·

Determines system operation conditions based on signals input from each switch.

·

Amplifies/processes waves received from the ultrasonic sensors, determines static objects, controls operation of the indicator lights, No. 1 clearance warning buzzer, and No. 2 clearance warning buzzer, and determines sensor abnormalities.

·

Controls operation of the No. 1 clearance warning buzzer and No. 2 clearance warning buzzer, and sends a display request signal, etc. to the parking assist ECU*1, rear television camera assembly*2 and combination meter assembly, based on static object detection data and abnormality judgment.


Combination Meter Assembly
·

Toyota Parking Assist-sensor System OFF Indicator

·

Multi-information Display

·

Buzzer


·

Sends a Toyota parking assist-sensor system on/off signal to the clearance warning ECU assembly.

·

Receives static object detection signals from the clearance warning ECU assembly, and displays Toyota parking assist-sensor system detection on the multi-information display.

·

When the Toyota parking assist-sensor system is off, turns the Toyota parking assist-sensor system OFF indicator on.

·

Sends a customization signal to the clearance warning ECU assembly.

·

When a malfunction is detected in the Toyota parking assist-sensor system or the ultrasonic sensors determine that control is not possible, the Toyota parking assist-sensor system OFF indicator illuminates and a message is displayed on the multi-information display to warn the driver.


No. 1 Clearance Warning Buzzer Changes the buzzer sound by controlling the clearance warning ECU assembly, in order to notify the driver of the approximate distance from the vehicle to a static object toward the front.
No. 2 Clearance Warning Buzzer Changes the buzzer sound by controlling the clearance warning ECU assembly, in order to notify the driver of the approximate distance from the vehicle to a static object toward the rear.
Multi-display Assembly*3 Displays Toyota parking assist-sensor system detection when a static object is detected.
Radio and Display Receiver Assembly*4
ECM Sends a shift position signal to the clearance warning ECU assembly.
Parking Assist ECU*1 Sends a static object detection video signal to the multi-display assembly*3 or radio and display receiver assembly*4, based on static object detection signals received from the clearance warning ECU assembly.
Rear Television Camera Assembly*2
Brake Actuator Assembly
·

No. 2 Skid Control ECU


Sends a vehicle speed signal to the clearance warning ECU assembly.
Air Conditioning Amplifier Assembly Sends an outside temperature signal to the clearance warning ECU assembly.
Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication buses.
DLC3
·

The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.

·

The Global TechStream (GTS) can be connected to change settings as desired by the user.




OPERATING CONDITION


a.

When all of the conditions in the table below are established, the system performs static object detection.

Detection Position Operation Conditions
Front Center
·

Ignition switch is turned ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is not P or R.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Front Corner
·

Ignition switch is turned ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is not P.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Rear Corner
·

Ignition switch is turned ON.

·

Toyota parking assist-sensor system is on.

·

The shift position is R.

·

The vehicle speed is approximately 10 km/h (6 mph) or less.


Rear Center



SYSTEM CONTROL


a.

Toyota Parking Assist-sensor System Detection Area

i.

Static objects are detected within approximately 600 mm (23.6 in.) of the front left and right corner sensors and rear left and right corner sensors, within approximately 1000 mm (39.4 in.) of the front left and right center sensors, and within approximately 1500 mm (59.1 in.) of the rear left and right center sensors. Note that there are some areas where static objects cannot be detected if they are too close to the bumper. The detection range may also vary depending on the shape of the static object.

Front Corner Sensor and Rear Corner Sensor Detection Area
Y275299C01
5.5,5.094 5.75,4.552 true 1.49,4.99 1.219,4.49 true 1.063,1.115 1.375,1.271 0.313,0.156 10 false *a 2.042,3.479 2.354,3.635 0.313,0.156 10 false *b 6.156,1.531 6.469,1.688 0.313,0.156 10 false *c 5.167,3.563 5.479,3.719 0.313,0.156 10 false *d 0.49,4.854 0.979,5.323 0.49,0.469 10 false *e (*A), i (*B) 0.531,5.604 0.99,6.094 0.458,0.49 10 false *f (*A), j (*B) 6.052,5.052 6.365,5.208 0.313,0.156 10 false *g 6.052,5.646 6.542,6.063 0.49,0.417 10 false *h (*A), k (*B) 5.729,4.375 6.042,4.531 0.313,0.156 10 false *l 0.229,6.615 0.542,6.771 0.313,0.156 10 false *m 1.219,3.396 1.531,3.552 0.313,0.156 10 false A 1.417,1.219 1.729,1.375 0.313,0.156 10 false A 5.927,1.604 6.26,1.802 0.333,0.198 10 false A 5.906,3.052 6.24,3.25 0.333,0.198 10 false A 0.573,6.625 0.906,6.781 0.333,0.156 10 false *n 1.125,4.333 1.438,4.531 0.313,0.198 10 false *l
*A Except Models with Aero package *B Models with Aero Package
*a Approximately 850 mm (33.5 in.) *b Approximately 600 mm (23.6 in.)
*c Approximately 850 mm (33.5 in.) *d Approximately 600 mm (23.6 in.)
*e Approximately 250 mm (9.84 in.) *f Approximately 500 mm (19.7 in.)
*g Approximately 250 mm (9.84 in.) *h Approximately 600 mm (23.6 in.)
*i Approximately 200 mm (7.87 in.) *j Approximately 650 mm (25.6 in.)
*k Approximately 550 mm (21.7 in.) *l Sensor Front (Cross Section A) Detection Area (Not Detection Area toward Front/Rear of Vehicle)
*m The detection area in the illustration was calculated using a pole with a diameter of 60 mm (2.36 in.). *n The illustration shown is an example only.
V100145

Detection Area - -


Front Center Sensor and Rear Center Sensor Detection Area
Y275300C02
0.667,2.323 0.979,2.479 0.313,0.156 10 false *a 1.323,3.292 1.635,3.448 0.313,0.156 10 false *b 6.438,2.323 6.75,2.479 0.313,0.156 10 false *c 5.521,3.417 5.833,3.573 0.313,0.156 10 false *d 0.49,4.885 0.802,5.042 0.313,0.156 10 false *e 0.74,5.646 2.177,6.24 1.438,0.594 10 false *f (*A), i (*B), l (*C) 6.51,4.896 7.021,5.344 0.51,0.448 10 false *g (*A), j (*B) 5.552,5.677 6.76,6.24 1.208,0.563 10 false *h (*A), k (*B) 0.198,6.656 0.51,6.813 0.313,0.156 10 false *m 0.406,6.656 0.708,6.823 0.302,0.167 10 false *n
*A Except Models with Aero package and Front Bumper Guard *B Models with Aero Package
*C Models with Front Bumper Guard - -
*a Approximately 2000 mm (78.7 in.) *b Approximately 1000 mm (39.4 in.)
*c Approximately 2000 mm (78.7 in.) *d Approximately 1500 mm (59.1 in.)
*e Approximately 500 mm (19.7 in.) *f Approximately 400 mm (15.7 in.)
*g Approximately 650 mm (25.6 in.) *h Approximately 400 mm (15.7 in.)
*i Approximately 350 mm (13.8 in.) *j Approximately 500 mm (19.7 in.)
*k Approximately 450 mm (17.7 in.) *l Approximately 250 mm (9.84 in.)
*m The detection area in the illustration was calculated using a pole with a diameter of 60 mm (2.36 in.). *n The illustration shown is an example only.
V100145

Detection Area - -




b.

Warning Buzzer Sounding

i.

The warning buzzer sound changes according to the distance from an identified static object.


ii.

The buzzer sounding interval changes approximately every 100 mm (3.94 in.) according to the distance from the static object.

Y275301E02
0.833,3.708 1.813,3.979 0.979,0.271 10 false Longest Range 1.979,3.698 2.688,3.917 0.708,0.219 10 false Long-range 2.906,3.719 3.802,3.99 0.896,0.271 10 false Medium-range 4.01,3.719 4.74,3.958 0.729,0.24 10 false Short-range 4.865,3.708 5.906,3.958 1.042,0.25 10 false Shortest Range 1.542,5.479 3.406,5.896 1.865,0.417 10 false Buzzer Sound Changes Every 100 mm (3.94 in.) 4.281,5.458 5.438,5.677 1.156,0.219 10 false Continuous Sound 0.271,6.5 3.26,6.823 2.99,0.323 10 false The illustration shown is an example only.

Identification Level Detection Distance [mm (in.)] Buzzer Sound

*1: Front center sensor detection only

*2: Rear center sensor detection only

Longest Range 1000 (39.4) - 600 (23.6)*1
1500 (59.1) - 600 (23.6) *2
The sound interval changes every 100 mm (3.94 in.), and then sounds intermittently.
Long-range 600 (23.6) - 450 (17.7)
Medium-range 450 (17.7) - 300 (11.8)
Short-range 300 (11.8) - 150 (5.91) Sounds consecutively.
Shortest Range 150 (5.91) or less


iii.

If sensors detect multiple stationary objects, the buzzer sounds according to the distance from the closest stationary object.

HINT:

*: The Toyota parking assist-sensor warning buzzer does not sound if the RCTA (models with RCTA) or RCD (models with RCD) warning buzzer is sounding.





FUNCTION


a.

Toyota Parking Assist-sensor System Operation

i.

The combination meter assembly customization setting can be used to turn the Toyota parking assist-sensor system on and off.


ii.

A Toyota parking assist-sensor system off indicator is located in the combination meter assembly to make it possible to check that the Toyota parking assist-sensor system is off.



b.

Warning Buzzer Mute Function

i.

When the warning buzzer is sounding, it is automatically muted if any of the following conditions are established.

·

There is no change to the distance from the static object over a certain period of time.

·

The distance between the vehicle and static object increases.

·

The static object is removed from the path.



ii.

When the warning buzzer has been automatically muted, it once again begins sounding if any of the following conditions are established.

·

A static object is detected within short-range.

·

The vehicle approaches a static object.

·

A static object that was out of the path of the vehicle is now on the path of the vehicle.



iii.

When the warning buzzer is sounding, the warning buzzer is temporarily muted if the steering pad switch assembly is used to do so.


iv.

When the warning buzzer has been temporarily muted, temporary muting is canceled if any of the following conditions are established.

·

The shift status is changed.

·

The vehicle speed reaches a certain value or higher.

·

There is a sensor abnormality (open/frozen).

·

It cannot be used (CAN communication abnormality).

·

The Toyota parking assist-sensor system was turned off.

·

The ignition switch was turned off.




c.

Abnormality Judgment

i.

When the Toyota parking assist-sensor system is turned on, abnormality judgment is performed on all sensors regardless of the shift position.


ii.

If there is an open or frozen sensor, or if there is a communication malfunction in the clearance warning ECU Assembly, a Toyota parking assist-sensor system off indicator illuminates and a warning is displayed on the multi-information display.



d.

Toyota Parking Assist-sensor System Settings

i.

The combination meter assembly customization setting can be used to change the volume of the buzzer (3 levels).


ii.

The Global TechStream (GTS) can be connected to change settings for some functions as desired by the user. Refer to the Repair Manual for details.




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). Refer to the Repair Manual for details.